1. Bubuka
This manual provides essential information for the safe and effective use of your WORKPRO Rotary Tool Set W124003. This versatile tool is designed for various applications including grinding, engraving, sanding, polishing, and cutting. Please read this manual thoroughly before operation and keep it for future reference.
2. Eusi Produk
The WORKPRO Rotary Tool Set W124003 includes a comprehensive collection of accessories for various tasks. Please verify that all items listed below are present in your kit.
Gambar 2.1: Leuwihview of the WORKPRO Rotary Tool Set W124003, showcasing the complete 276-piece kit within its transparent storage case.
- Sanding Bands: 52 pieces
- Sanding Discs: 40 pieces
- Emery Cut-off Wheels: 36 pieces
- Grinding Compound: 1 piece
- Fiberglass Cut-off Wheels: 16 pieces
- Flap Wheels: 4 pieces
- Felt Polishing Wheels: 8 pieces
- Felt Tip: 1 piece
- Silicon Carbide Grinding Stones: 6 pieces
- Aluminum Oxide Grinding Stones: 6 pieces
- White Aluminum Oxide Wheels: 6 pieces
- Diamond Wheels: 2 pieces
- Dressing Stone: 1 piece
- Collets: 3 pieces
- Kunci: 1 buah
- Rubber Emery Wheels: 2 pieces
- Diamond Cutters: 9 pieces
- HSS Twist Drill Bits: 9 pieces
- Mandrel Wheels: 3 pieces
- Sanding Shanks: 3 pieces
- Suction Cup: 1 piece
- Rubber Grinding Stones: 6 pieces
- Silicon Carbide Grinding Stones: 4 pieces
Figure 2.2: The rotary tool set opened, displaying the organized arrangement of various accessories in both the top and bottom compartments.
Gambar 2.3: A lengkep view of the grinding and sanding accessories, including various grit sizes and shapes for different applications.
Figure 2.4: The upper tray of the accessory kit, featuring an assortment of bits such as grinding stones, diamond cutters, and brushes.
3. Parentah Kasalametan
Always follow basic safety precautions when using this rotary tool to reduce the risk of injury or damage. Failure to do so may result in serious injury.
- Perlindungan panon: Always wear ANSI-approved safety goggles or safety glasses with side shields when operating the tool.
- Perlindungan engapan: Wear a dust mask or respirator, especially when working with materials that produce fine dust.
- Wewengkon Gawé: Keep your work area clean, well-lit, and free of clutter. Ensure adequate ventilation.
- Workpiece Aman: Salawasna amankeun benda kerja ku clamps or a vise. Never hold the workpiece by hand.
- Pakéan anu leres: Entong nganggo pakean longgar, perhiasan, atanapi rambut panjang anu tiasa katéwak dina bagian anu obah.
- Sumber Daya: Ensure the power source matches the tool's requirements. Unplug the tool when not in use or when changing accessories.
- Hindarkeun Overreaching: Ngajaga footing ditangtoskeun jeung kasaimbangan sepanjang waktos.
- Kaayaan alat: Inspect the tool and accessories for damage before each use. Do not use damaged tools or accessories.
- Barudak sareng Panyusun: Jauhkeun barudak sareng jalma anu aya di tempat operasi.
- Bahan anu gampang kaduruk: Do not operate the tool near flammable liquids, gases, or dust.
4. Setélan
Before operating your rotary tool, follow these steps for proper setup:
- Ngabongkar: Cabut sadaya komponén tina bungkusna kalayan ati-ati. Simpen bungkusna kanggo disimpen atanapi diangkut.
- mariksa: Check the tool and all accessories for any signs of damage from shipping. Do not use if damaged.
- Pilih Asesoris: Choose the appropriate accessory for your task (e.g., grinding stone, sanding band, cutting wheel).
- Selapkeun aksésori:
- Press and hold the shaft lock button on the rotary tool.
- Cabut mur collet-na.
- Insert the accessory shank fully into the collet.
- Kencengkeun mur collet pageuh-pageuh nganggo konci anu disayogikeun. Ulah kenceng teuing.
- Leupaskeun tombol konci aci.
- Sambungan Daya: Ensure the tool's power switch is in the "OFF" position before plugging it into a suitable power outlet.
5. Parentah Operasi
Once set up, you can begin using your WORKPRO Rotary Tool. Always practice on scrap material first.
- Daya Hurung: Plug the tool into the power outlet. Turn the power switch to the "ON" position.
- Pangaluyuan Kacepetan: If your model has variable speed control, adjust the speed according to the material and accessory being used. Higher speeds are generally for harder materials and smaller accessories, while lower speeds are for softer materials and larger accessories.
- Aplikasi:
- Grinding/Engraving: Apply light, consistent pressure. Let the tool do the work. Move the tool smoothly across the workpiece.
- Ampelas: Use appropriate grit sanding bands/discs. Move the tool in a circular or back-and-forth motion to achieve an even finish.
- motong: Use cut-off wheels for cutting. Ensure the workpiece is stable. Apply gentle pressure and allow the wheel to cut through the material.
- ngagosok: Use felt wheels with polishing compound. Apply a small amount of compound to the wheel and polish the surface with light pressure.
- Pareum listrik: When finished, turn the power switch to the "OFF" position and unplug the tool from the power outlet.
6. Pangropéa
Pangropéa rutin ngajamin umur panjang sareng kinerja optimal alat puteran anjeun.
- beberesih: After each use, unplug the tool and use a soft brush or compressed air to remove dust and debris from the ventilation openings and around the collet.
- Panyimpenan aksésori: Store accessories in their designated compartments within the case to prevent damage and loss.
- Panyimpen Alat: Store the rotary tool in a dry, secure location, out of reach of children.
- Inspeksi kabel: Regularly inspect the power cord for any cuts, fraying, or damage. Do not use the tool if the cord is damaged.
- Ganti sikat: (If applicable for this model) Refer to a qualified service technician for carbon brush inspection and replacement if the tool experiences reduced power or intermittent operation.
7. Cara ngungkulan
If you encounter issues with your WORKPRO Rotary Tool, refer to the following common problems and solutions:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Alat teu hurung. | No power supply; Faulty power switch; Damaged cord. | Check power outlet; Ensure switch is ON; Inspect cord for damage. |
| Asesoris oyag atanapi ngageter kaleuleuwihi. | Accessory not properly inserted; Collet nut loose; Bent accessory shank. | Re-insert accessory fully and tighten collet nut; Replace bent accessory. |
| Alat overheats. | Blocked ventilation; Excessive pressure during operation; Prolonged use. | Clean ventilation slots; Reduce pressure; Allow tool to cool down. |
| Poor performance (e.g., slow grinding). | Worn accessory; Incorrect speed setting; Inappropriate accessory for material. | Replace worn accessory; Adjust speed; Select correct accessory for task. |
8. Spésifikasi
Key technical specifications for the WORKPRO Rotary Tool Set W124003:
- merek: WORKPRO
- Jumlah modél: W124003
- Product Dimensions (Approx.): Panjang 240mm x Rubak 290mm x Kandel 57mm
- Product Weight (Approx.): 838 g
- Total Weight (Approx.): 860 g (kaasup bungkusan)
- Sumber Daya: Kabel Listrik
- kuantitas: 1 Setél
9. Garansi jeung Rojongan
According to the product information, there is no specific warranty provided for this item. For any product inquiries, technical assistance, or support, please contact the seller or WORKPRO customer service directly through their official channels.
You can visit the official WORKPRO store on Amazon for more information: Toko WORKPRO
