Strymon TML

Buku Panduan Pangguna Pedal Delay Multidimensional TimeLine Strymon

model: TML

Your guide to unlocking the full potential of your Strymon TimeLine.

1. Bubuka

The Strymon TimeLine is a powerful and versatile multidimensional delay pedal designed to provide an extensive range of studio-quality delay effects. Featuring 12 distinct delay algorithms, a comprehensive 30-second stereo looper, and full MIDI implementation, the TimeLine offers unparalleled creative possibilities for guitarists and musicians.

This manual provides essential information for setting up, operating, maintaining, and troubleshooting your TimeLine pedal, ensuring you get the most out of its advanced features.

2. Ngamimitian: Setup

2.1. Naon dina Box

2.2. Sambungan Daya

Connect the included 9-volt DC power supply to the 9VDC input jack on the rear panel of the TimeLine pedal. Ensure the power supply is rated for 9V DC with a center-negative polarity and sufficient current (minimum 300mA recommended).

2.3. Sambungan Audio

The TimeLine supports both mono and stereo operation. Use standard 1/4-inch instrument cables for all audio connections.

Rear panel of Strymon TimeLine pedal showing all input and output jacks.

Figure 2.3.1: Rear panel connections including Left/Right In/Out, Expression, MIDI, and Power.

2.4. Sambungan MIDI

The TimeLine features MIDI DI jeung MIDI OUT ports for advanced control and synchronization. Use standard 5-pin DIN MIDI cables to connect to MIDI controllers, interfaces, or other MIDI-enabled devices.

Close-up of the Strymon TimeLine rear panel with MIDI cables connected.

Figure 2.4.1: MIDI In and Out ports with connected cables.

2.5. Expression Pedal Input

Connect an expression pedal to the EXP jack using a TRS (stereo) cable. This allows real-time control over various parameters, such as delay time, mix, or feedback, for dynamic performance.

Strymon TimeLine pedal connected to an expression pedal.

Figure 2.5.1: Expression pedal connected to the TimeLine.

3. Operasi

3.1. Kontrol Leuwihview

The TimeLine features a comprehensive set of knobs and footswitches for intuitive control over its delay parameters and looper functions.

Puncak view of the Strymon TimeLine pedal showing all knobs, footswitches, and the display.

Figure 3.1.1: Front panel controls of the Strymon TimeLine.

3.2. Delay Algorithms

The TimeLine offers 12 unique delay machines, each with its own distinct character and adjustable parameters:

Diagram illustrating the 12 unique delay machines of the Strymon TimeLine.

Gambar 3.2.1: Leuwihview of the 12 unique delay algorithms.

3.3. Looper Functionality

The TimeLine includes a powerful 30-second stereo looper. It can be routed pre- or post-delay, allowing for creative layering and sound design.

Strymon TimeLine pedal with text highlighting its built-in looper features.

Figure 3.3.1: Built-in looper capabilities.

3.4. Nyimpen sarta Recalling prasetél

The TimeLine allows you to save and recall your custom delay settings. The pedal has 200 preset locations, organized into 100 banks (A and B per bank).

4. Pangropéa

Proper maintenance ensures the longevity and optimal performance of your Strymon TimeLine pedal.

5. Cara ngungkulan

If you encounter issues with your TimeLine pedal, refer to the following common troubleshooting steps:

Masalah Mungkin Cukang lantaranana / Solusi
No power / Pedal not turning on
  • Ensure the 9V DC power supply is correctly connected and functioning.
  • Pastikeun stop kontak listrik aktip.
  • Confirm the power supply meets the pedal's specifications (9V DC, center-negative, min 300mA).
No sound / Dry signal only
  • Check all audio cable connections (input, output).
  • Ensure the MIX knob is not set to fully dry (counter-clockwise).
  • Bypass the pedal to check if the issue is with the pedal or other equipment.
  • Verify the pedal is not in a bypass mode or a preset with zero delay mix.
Unexpected behavior / Glitches
  • Try a factory reset (refer to Strymon's official documentation for specific instructions).
  • Ensure no other pedals or power supplies are causing interference.
  • Pariksa apdet firmware panganyarna.
Looper teu ngarékam/maén
  • Ensure you are pressing the correct footswitches (REC/DUB for record/overdub, PLAY for playback).
  • Check if the looper memory is full (though 30 seconds is substantial).
  • Verify the looper is enabled in the pedal's global settings if applicable.

For more detailed troubleshooting or issues not covered here, please visit the official Strymon support websitus atanapi ngahubungan layanan palanggan maranéhna.

6. Spésifikasi

Fitur Rincian
Nomer modél TML
Item Beurat 2.03 pon (921 gram)
Dimensi produk 10.24 x 5.91 x 3.54 inci
Sumber Daya Kabel Listrik
Voltage 9 Volts DC (center-negative)
Tipe Panyambung 1/4-inch audio jack, 5-pin DIN MIDI
Panganteur Hardware 1/4-inch Audio, MIDI
Format Sinyal Analog (input/output), Digital (internal processing)
Delay Types 12 (Digital, Dual, Pattern, Reverse, Ice, Duck, dBucket, dTape, Lo-Fi, Swell, Trem, Filter)
Looper Length 30 seconds (stereo)
Prasetél 200 (100 banks x 2 presets)

7. Garansi jeung Rojongan

Strymon products are built with high-quality components and undergo rigorous testing. For information regarding the warranty period and terms for your TimeLine pedal, please refer to the warranty card included with your product or visit the official Strymon websitus.

For technical support, product registration, or to access additional resources such as FAQs and firmware downloads, please visit the official Strymon support page or their Amazon Brand Store:

Visit the Strymon Store on Amazon

Dokumén Patali - TML

Praview Strymon DIG Dual Digital reureuh Guide Gancang Mimitian
Pituduh singket pikeun Strymon DIG dual digital delay pedal, ngawengku kadali na, sambungan panel pungkur, sarta s.ample setelan pikeun achieving rupa épék reureuh.
Praview Strymon UltraViolet Vintage Manual Pamaké Vibe
Manual pamaké komprehensif pikeun Strymon UltraViolet Vintage Vibe éfék pedal, ngawengku kadali panel hareup jeung pungkur, mode power-up, pilihan kontrol éksternal (pedal éksprési, MIDI), spésifikasi MIDI, reset pabrik, fitur, spésifikasi teknis, sampsetelan le, jaminan, sarta informasi kaamanan.
Praview Pituduh Mimitian Gancang Strymon Deco V2: Pedal Éfék Saturasi Tape & Doubletracker
Mimitian ku Strymon Deco V2, pedal épék saturasi pita sareng doubletracker. Pituduh ngamimitian gancang ieu ngawengku kontrol, sambungan, sareng sampsetélan le pikeun sora pita klasik sareng sora gema ganda.
Praview Manual Pamaké Mesin Echo Magnetik Strymon Volante
Manual pamaké komprehensif pikeun Strymon Volante Magnetic Echo Machine, ngajéntrékeun fitur, kadali, sareng modeu operasionalna.
Praview Strymon Flint Tremolo & Reverb Guide Gancang Mimitian
Pituduh mimiti gancang pikeun pedal épék Strymon Flint Tremolo & Reverb, ngajéntrékeun kenop, saklar, sareng sambungan panel pungkur.
Praview Strymon blueSky Reverberator Guide Gancang Mimitian
Pitunjuk ngamimitian gancang pikeun pedal Strymon blueSky Reverberator, ngajéntrékeun kenop, saklar, sambungan panel pungkur, sareng s.ample setélan.