1. Bubuka
This manual provides essential information for the installation, operation, and maintenance of the BANNER ENGINEERING S18AW3FF50 EZ-Beam S18 Series Photoelectric Sensor. This sensor is designed for reliable object detection in industrial environments, featuring a 50 mm range, 20-250VAC input, and SPST solid-state light operate output.
Figure 1: BANNER ENGINEERING S18AW3FF50 Photoelectric Sensor with coiled cable.
2. Setup jeung Instalasi
Pamasangan anu leres penting pisan pikeun kinerja sareng kaamanan anu optimal. Turutan léngkah-léngkah ieu kalayan saksama.
2.1 Ngabongkar sareng Inspeksi
- Carefully remove the sensor from its packaging.
- Inspect the sensor for any visible damage that may have occurred during shipping.
- Pastikeun yén sadaya komponén anu didaptarkeun dina slip bungkusan aya.
2.2 Pasang Sénsor
The S18AW3FF50 sensor is designed for easy mounting. Ensure the mounting surface is stable and free from excessive vibration.
- Select a mounting location that provides clear line-of-sight for the sensor's detection range (50 mm).
- Secure the sensor using appropriate mounting hardware (not included). The sensor features a threaded barrel for secure attachment.
- Ensure the sensor is oriented correctly for the intended detection application.
Gambar 2: Sisi view of the S18AW3FF50 sensor, showing the threaded barrel and cable.
2.3 Sambungan Listrik
PERHATOSAN: Disconnect all power before making electrical connections to prevent electric shock or damage to the equipment.
The S18AW3FF50 operates on 20-250VAC input and provides an SPST Solid-State Light Operate output. The sensor comes with a 2M (6.5FT) cable.
| Warna Kawat | Fungsi |
|---|---|
| coklat | AC Line (L1) |
| Biru | AC Neutral (L2) |
| Hideung | Output (SPST Light Operate) |
Connect the sensor wires to the control circuit according to the provided wiring diagram and local electrical codes. Ensure all connections are secure.
Figure 3: S18AW3FF50 sensor showing the cable with exposed wires for electrical connection.
3. Operasi
Once installed and wired, the S18AW3FF50 sensor is ready for operation.
3.1 Powering On
Apply power to the sensor (20-250VAC). The sensor will typically have an indicator LED (if present) to show power status and output state.
3.2 Prinsip Deteksi
The S18AW3FF50 is a photoelectric sensor operating in a fixed field mode. It emits a light beam and detects objects based on the reflection or interruption of this beam. The "Light Operate" output means the output will be active when light is received by the sensor (i.e., when an object is detected or not detected, depending on the specific fixed field configuration).
3.3 Range and Performance
The sensor has a specified detection range of 50 mm. Ensure that objects to be detected fall within this range for reliable operation. Environmental factors such as dust, moisture, and ambient light can affect performance.
4. Pangropéa
The S18AW3FF50 sensor is designed for low maintenance. Regular checks can ensure long-term reliable operation.
4.1 beberesih
- Periodically clean the sensor lens and housing to remove dust, dirt, or debris that may accumulate and interfere with detection.
- Use a soft, lint-free cloth and a mild cleaning solution if necessary. Avoid abrasive cleaners or solvents.
4.2 Cable and Connection Inspection
- Regularly inspect the sensor cable for any signs of wear, cuts, or damage.
- Check electrical connections to ensure they remain secure and free from corrosion.
5. Cara ngungkulan
This section provides solutions to common issues encountered with the S18AW3FF50 sensor.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Sensor teu hurung | No power supply; Incorrect wiring; Damaged sensor. | Verify power supply (20-250VAC); Check wiring against Table 1; Replace sensor if damaged. |
| Sensor not detecting objects | Object out of range (50 mm); Dirty lens; Misalignment; Ambient light interference. | Ensure object is within 50 mm range; Clean sensor lens; Realign sensor; Shield sensor from strong ambient light. |
| Deteksi intermiten | Vibration; Loose connections; Fluctuating power. | Secure sensor mounting; Check all electrical connections; Ensure stable power supply. |
6. Spésifikasi
Key technical specifications for the BANNER ENGINEERING S18AW3FF50 Photoelectric Sensor.
- model: S18AW3FF50
- runtuyan: EZ-Beam S18 Series
- Rentang deteksi: 50 mm
- Masukan Voltage: 20-250VAC
- Jenis Kaluaran: SPST Solid-State Light Operate
- Panjang kabel: 2M (6.5FT)
- Tipe sénsor: Photoelectric, Fixed Field
- Pabrikan: BANNER ENGINEERING
- ASIN: B07RZTBRLS
- Titimangsa munggaran sadia: 3 Désémber 2021
7. Garansi jeung Rojongan
For warranty information and technical support, please contact BANNER ENGINEERING directly or refer to their official websitus.
Kabijakan pamulangan: The product may be subject to a return policy of 30 days for refund/replacement, as per the seller's terms.
Pabrikan: BANNER ENGINEERING
Pikeun pitulung salajengna, buka di BANNER ENGINEERING official websitus.
