SEIKO SSB345 Quartz Chronograph Watch Instruction Manual

1. Produk Langkungview

The SEIKO SSB345 is a quartz chronograph watch designed for men, featuring a tachymeter bezel and a durable stainless steel case and bracelet. This manual provides essential information for the proper use and care of your watch.

Gambar 1: Hareupeun view of the SEIKO SSB345 Quartz Chronograph Watch.

Gambar 2: Sisi view jam tangan, nyorot makuta sareng pendorong.

2. Setelan sareng Pangaluyuan Awal

2.1 Nyetél Waktos sareng Kaping

1. Tarik kaluar makuta: Gently pull the crown (located on the right side of the watch case) to the second click position.
2. Setel waktos: Rotate the crown to move the hour and minute hands to the desired time. Ensure the 24-hour subdial also reflects the correct AM/PM.
3. Setel tanggal: Push the crown back to the first click position. Rotate the crown to adjust the date. Avoid setting the date between 9 PM and 1 AM, as this may interfere with the date change mechanism.
4. Nyorong dina makuta: Once the time and date are set, push the crown back to its normal position to start the watch.

2.2 Nyaluyukeun Gelang

The stainless steel bracelet can be adjusted by removing or adding links to achieve a comfortable fit. It is recommended to have this adjustment performed by a qualified watch technician to prevent damage to the bracelet or watch.

3. Operating the Chronograph and Tachymeter

3.1 Fungsi Chronograph

The chronograph measures elapsed time up to 60 minutes in 1/5-second increments.

• Mimitian: Pencét pendorong luhur (A) pikeun ngamimitian kronograf. Jarum detik kronograf bakal mimiti gerak.
• Eureun: Press the upper pusher (A) again to stop the chronograph. The elapsed time will be indicated by the chronograph second hand and minute subdial.
• Reset: After stopping, press the lower pusher (B) to reset the chronograph hands to their zero positions.
• Waktu Pamisahan: To measure split times, press the lower pusher (B) while the chronograph is running. The chronograph hands will stop to indicate the split time. Press (B) again to resume measurement.

3.2 Tachymeter Function

The tachymeter bezel allows for the calculation of speed over a known distance (e.g., 1 kilometer or 1 mile) or production rates.

1. Start Chronograph: Begin timing an event (e.g., a vehicle traveling 1 unit of distance) by pressing the upper pusher (A).
2. Laju maca: When the event is completed, stop the chronograph by pressing the upper pusher (A). The position of the chronograph second hand on the tachymeter scale indicates the average speed per hour. For example, if the chronograph second hand points to '120' after 1 unit of distance, the speed is 120 units per hour.

4. Pangropéa sarta perawatan

4.1 Tahan cai

The SEIKO SSB345 watch has a water resistance rating of 10 BAR (100 meters). This means it is suitable for everyday use, swimming, and snorkeling, but not for scuba diving. Ensure the crown is fully pushed in before any contact with water.

Figure 3: Illustration of water resistance for Seiko watches.

4.2 beberesih

Wipe the watch case and bracelet periodically with a soft, dry cloth to remove dirt and moisture. For stainless steel bracelets, a soft brush with mild soapy water can be used, followed by thorough rinsing and drying.

4.3 Ngagantian batré

The watch is powered by a Lithium Ion battery. When the battery life is low, the second hand may move in two-second intervals. Battery replacement should be performed by a professional watchmaker to ensure proper sealing and function.

5. Cara ngungkulan

• Lalajo teu ngajalankeun: Pariksa naha makuta parantos dipencet sapinuhna ka jero. Upami jam tangan masih teu tiasa dianggo, batréna panginten kedah digentos.
• Leungeun Chronograph henteu ngareset kana nol: This may require a chronograph reset procedure. Consult a professional watchmaker or the detailed movement module manual for specific instructions.
• Tanggal teu robah: Ensure the time is set correctly for AM/PM. If the date changes at noon, the time is set 12 hours off.

6. Spésifikasi

7. Garansi jeung Rojongan

Your SEIKO watch is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For service, repairs, or further assistance, please contact an authorized SEIKO service center or the retailer where the watch was purchased.