1. Produk Langkungview
The Beta 1972/18 is an ultra-compact 18V brushless impact driver designed for professional use. It features a digital motor for enhanced performance, offering more power, reduced consumption, and precise power dosage.
- Brushless Digital Motor: Provides increased power and efficiency.
- Torsi luhur: Up to 75 Nm for demanding applications.
- Kacepetan variabel: Up to 2100 RPM for versatile drilling and driving.
- LED Front Lighting: Nyaangan wewengkon gawé pikeun ngaronjatkeun pisibilitas.
- Perlindungan batré: Triple battery self-protection against overload and cell power differences.
Figure 1.1: The Beta 1972/18 Impact Driver, showcasing desain kompak na cecekelan ergonomic.
2. Komponén Kaasup
Your Beta 1972/18 Impact Driver package includes the following items:
- Beta 1972/18 Impact Driver
- 2 x 5Ah Batré Litium-Ion
- Quick Charger (80 minutes charging time)
- Hard Case for storage and transport
- Belt Clip (right/left mountable)
Figure 2.1: All components of the Beta 1972/18 kit neatly organized within the durable hard case.
3. Setup jeung Majelis
3.1 Ngecas Batré
- Connect the quick charger to a suitable power outlet.
- Slide the 5Ah Lithium-Ion battery onto the charger until it clicks into place.
- Allow approximately 80 minutes for a full charge. The charger will indicate when charging is complete.
- Saatos dicas, cabut batré tina carjer.
3.2 Masang Batre
- Align the charged battery with the base of the impact driver.
- Slide the battery firmly into the tool until it locks securely.
- To remove, press the battery release buttons on the sides and slide the battery out.
3.3 Ngalampirkeun Klip Beubeur
The belt clip can be attached to either the right or left side of the tool for convenient carrying.
- Locate the screw hole on the side of the tool where you wish to attach the clip.
- Align the belt clip with the hole and secure it with the provided screw.
4. Parentah Operasi
4.1 Powering on / Pareum tur Speed Control
- To power on the tool, press the trigger switch. The LED front light will illuminate.
- Pikeun mareuman, leupaskeun saklar pemicu.
- The tool features a variable speed trigger. Pressing the trigger further increases the speed up to 2100 RPM.
- Use the speed selector switch (if present, typically near the chuck) to choose between two speed ranges for different applications.
4.2 Torsi adjustment
The torque collar allows you to adjust the amount of torque applied, preventing overtightening or stripping screws. Rotate the collar to select the desired torque setting, up to 75 Nm.
4.3 Pangeboran sareng Nyetir
- Insert the appropriate drill bit or driver bit into the chuck. Tighten the chuck securely.
- Pilih setélan kecepatan sareng torsi anu dipikahoyong.
- Posisi alat pageuh ngalawan workpiece nu.
- Press the trigger to begin drilling or driving. Apply steady, even pressure.
- For drilling into steel, the maximum recommended diameter is 13 mm. For wood, it is 45 mm.
Figure 4.1: Demonstrating the Beta 1972/18 in action, drilling into a wooden surface.
Figure 4.2: The compact design allows for use in confined spaces, such as under a car hood.
5. Pangropéa
5.1 beberesih
- Sok pegatkeun sambungan batré saméméh beberesih.
- Lap alatna ku lawon bersih,amp lawon. Ulah make bahan kimia kasar atawa cleaners abrasive.
- Keep ventilation openings clear of dust and debris. Use compressed air if necessary.
5.2 Kamanusaan sarta Studi Batré
- Simpen batré di tempat anu tiis sareng garing jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
- Pikeun neundeun jangka panjang, ngecas batré nepi ka kapasitas kurang leuwih 50%.
- Ulah nyimpen batré dina kaayaan kosong pikeun nyegah karusakan.
5.3 Pangropéa Umum
- Regularly inspect the chuck for wear and tear.
- Pariksa kabel daya carjer naha aya karusakan.
- Ensure all screws and fasteners on the tool are tight.
6. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Alat henteu ngamimitian | Batré henteu dieusi atanapi henteu leres diselapkeun. | Pastikeun batréna geus dicas pinuh tur aman diselapkeun. |
| Ngurangan kakuatan / kinerja | Batré lemah atanapi alat kaleuwihan beurat. | Ngecas batré. Ngurangan beban dina alat. |
| Batré teu ngecas | Charger not connected, faulty battery, or extreme temperature. | Check charger connection. Allow battery to reach room temperature. Contact support if issue persists. |
| Geter atawa noise kaleuleuwihan | Loose bit, damaged chuck, or internal issue. | Ensure bit is securely fastened. Inspect chuck for damage. If problem persists, seek professional service. |
7. Spésifikasi
| Fitur | Rincian |
|---|---|
| Produsén | Béta |
| Nomer Bagian | 019720018 |
| Nomer Modél Item | Beta 1972/18 |
| Sumber Daya | Electric (Battery) |
| Voltage | 18 volt |
| Torsi | 75 Newton Méter |
| Laju | 2100 RPM (Max) |
| Fitur husus | Brushless Motor, Compact |
| Pamakéan | Profésional |
| Komponén Kaasup | 2 x 5Ah Li-ion batteries, Quick charger (80 min) |
| Tipe sél batré | Litium Ion |
| Item Beurat | 5.88 kg |
| Ukuran Paket | 46.5 x 36 x 14.5 cm |
| Tanggal Kahiji Sadia | 15 Juni 2019 |
8. Garansi jeung Rojongan
The Beta 1972/18 Impact Driver comes with a 3-Taun Garansi, mastikeun katengtreman pikiran ngeunaan kualitas sareng kinerjana.
Beta Tools is a leading company in Italy for the design and production of professional work tools. They maintain a strong presence with three production facilities in Italy, demonstrating their commitment to quality and customer satisfaction.
For technical assistance, warranty claims, or any product-related inquiries, please refer to the contact information provided in your product packaging or visit the official Beta Tools websitus. Simpen resi pameseran anjeun salaku bukti pameseran pikeun tujuan garansi.
Kanggo inpo nu leuwih lengkep, anjeun tiasa nganjang ka Beta Brand Page on Amazon.
