Einhell Cordless Impact Driver TE-CD 18/48 Li-i User Manual

Parentah Kasalametan penting

Baca sagala warnings kaamanan, parentah, ilustrasi, sarta spésifikasi disadiakeun kalawan alat kakuatan ieu. Gagalna nuturkeun sadaya paréntah anu didaptarkeun di handap ieu tiasa nyababkeun shock listrik, seuneu, sareng/atawa tatu anu serius.

Peringatan Kasalametan Alat Daya Umum

• Kasalametan Area Gawé: Tetep wewengkon gawé beresih jeung cahayana alus. Wewengkon nu pabalatak atawa poek ngondang kacilakaan. Ulah ngajalankeun parabot kakuatan dina atmosfir ngabeledug, kayaning ku ayana cair kaduruk, gas, atawa lebu.
• Kasalametan listrik: Colokan alat listrik kedah cocog sareng stop kontak. Pernah ngarobah colokan dina sagala cara. Ulah ngalaan alat listrik ka hujan atawa kaayaan baseuh.
• Kasalametan Pribadi: Stay alert, watch what you are doing, and use common sense when operating a power tool. Use personal protective equipment. Always wear eye protection.
• Pamakéan sareng Perawatan Alat Daya: Ulah maksakeun alat kakuatan. Anggo alat kakuatan anu leres pikeun aplikasi anjeun. Pegatkeun sambungan batré tina alat kakuatan samemeh nyieun sagala pangaluyuan, ngaganti asesoris, atawa nyimpen parabot kakuatan.

Batré jeung Carjer Kasalametan

• Only use the charger specified by the manufacturer to recharge. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
• Anggo alat-alat listrik ngan nganggo bungkus batré anu ditunjuk sacara khusus. Pamakéan bungkusan batré anu sanés tiasa nyababkeun résiko tatu sareng seuneu.
• Lamun pak batré teu dipake, jauhkeun tina objék logam lianna, kawas klip kertas, koin, kenop, paku, screws atawa objék logam leutik lianna, nu bisa nyieun sambungan ti hiji terminal ka nu sejen.
• Dina kaayaan kasar, cairan bisa ejected tina batréna; nyingkahan kontak. Upami kontak teu kahaja, siram ku cai. Lamun cairan kontak panon, tambahan neangan pitulung médis.

Produk Leuwihview

The Einhell TE-CD 18/48 Li-i is a versatile cordless impact driver designed for drilling, impact drilling, and screwing tasks. It is part of the Power X-Change battery system, ensuring compatibility with other Einhell 18V batteries.

Gambar 1: The Einhell TE-CD 18/48 Li-i Cordless Impact Driver shown with its two 2.0Ah Power X-Change batteries, charger, and storage case. This image illustrates the complete kit included with the product.

Komponén konci

• Cék: For securing drill bits and screwdriver bits.
• Cincin Pamilih Torsi: Adjusts the torque for screwing applications.
• Pamilih fungsi: Switches between drilling, impact drilling, and screwing modes.
• Switch Pamilih Speed: Controls the two-speed gear for different applications.
• Saklar pemicu: Ngaktipkeun alat sareng ngontrol kecepatan (kecepatan variabel).
• Saklar Maju/Mundur: Ngarobah arah rotasi.
• Lampu Gawé LED: Illuminates wewengkon gawé.
• Paket batré: 18V Power X-Change Li-ion battery.
• Charger batré: For recharging the Power X-Change batteries.
• Gagang bantu: Nyadiakeun cengkraman sareng kontrol tambahan.

Disetél

1. Ngecas Batré

1. Sambungkeun carjer ka colokan listrik anu cocog.
2. Selapkeun pak batré kana carjer. Pastikeun éta ngaklik kana tempatna.
3. Lampu indikator ngecas dina carjer bakal nunjukkeun status ngecas. Tingal pituduh husus pangecas pikeun indikasi cahaya.
4. Saatos dicas pinuh, cabut batré tina carjer.

2. Nyelapkeun sareng Nyabut Batré

• nyelapkeun: Slide the charged battery pack into the base of the impact driver until it locks securely.
• Ngahapus: Press the release button(s) on the battery pack and slide it out of the tool.

3. Attaching and Removing Drill Bits/Accessories

1. Pastikeun alat dipareuman sareng batréna dicabut.
2. Puterkeun cuk counter-jarum jam pikeun muka rahang.
3. Selapkeun bit bor atawa aksésori kana cuk, mastikeun eta dipuseurkeun.
4. Puter cuk saarah jarum jam pikeun tighten rahang aman sabudeureun bit. Leungeun-cepeng pageuh.
5. To remove, rotate the chuck counter-clockwise and pull out the bit.

4. Ngagantelkeun Gagang Bantu

The auxiliary handle provides better control, especially during impact drilling or when working with higher torque. Screw the auxiliary handle onto the designated threaded collar at the front of the drill until it is firm. Adjust its position for comfortable use.

Parentah Operasi

1. Powering on / Pareum tur Speed ​​Control

• Pikeun Ngahurungkeun: Press the trigger switch. The tool's speed is variable depending on how far the trigger is pressed.
• Pikeun mareuman: Leupaskeun switch pemicu.
• Pilihan Speed: Use the 2-speed gear selector switch located on top of the tool. Position '1' is for low speed and high torque (e.g., screwing, large diameter drilling). Position '2' is for high speed and lower torque (e.g., small diameter drilling).

2. Setting Rotation Direction (Forward/Reverse)

The forward/reverse switch is located above the trigger. Push it to the left for forward rotation (drilling/screwing in) and to the right for reverse rotation (removing screws). Ensure the switch is in the center position when not in use to prevent accidental starting.

3. Selecting Operating Mode and Torque

• Modeu Ngasekrup: Rotate the function selector ring to the screw symbol. Adjust the torque selector ring to the desired setting (1-21). Lower numbers are for smaller screws or softer materials; higher numbers for larger screws or harder materials.
• Mode pangeboran: Rotate the function selector ring to the drill bit symbol. The clutch will not engage, providing maximum torque for drilling.
• Modeu Pangeboran Dampak: Rotate the function selector ring to the hammer symbol. This mode is for drilling into masonry or concrete.

4. Ngagunakeun Lampu Gawé LED

The integrated LED work light automatically illuminates the work area when the trigger is pressed, improving visibility in dimly lit conditions.

5. Tip Operasi Umum

• Always hold the tool firmly with both hands, especially when using the auxiliary handle.
• Larapkeun ajeg, malah tekanan. Ulah maksakeun alat.
• Pikeun pangeboran, mimitian ku speed slow pikeun nyieun liang pilot, lajeng ningkatkeun speed sakumaha diperlukeun.
• When screwing, use the appropriate torque setting to prevent stripping screw heads or damaging the workpiece.

Gambar 2: An individual demonstrating the use of the Einhell TE-CD 18/48 Li-i Cordless Impact Driver for drilling into a wooden beam. This illustrates proper handling and application of the tool during operation.

Pangropéa

Regular maintenance ensures the longevity and optimal performance of your Einhell Cordless Impact Driver.

1. beberesih

• Salawasna cabut pak batré saméméh beberesih.
• Keep the ventilation slots clean to prevent overheating. Use a soft brush or compressed air.
• Ngusap perumahan alat ku lemes, damp lawon. Ulah make agén beberesih kasar atawa pangleyur.
• Ngabersihan rahang cuk sacara teratur pikeun mastikeun cengkraman anu pas dina bit.

2. Kaperawatan batré

• Simpen batré di tempat anu tiis, garing, jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
• Ulah ngantep batréna béak pinuh dina jangka waktu anu lila. Cas deui sacara berkala upami teu dianggo.
• Inspect battery terminals for dirt or corrosion and clean if necessary.

3. Panyimpenan

Store the impact driver, batteries, and charger in the provided carry case in a dry, secure location, out of reach of children. Ensure the battery is removed from the tool before storage.

Pamérésan masalah

If you encounter problems not listed here or if solutions do not resolve the issue, please contact Einhell customer support.

spésifikasi

Garansi sareng Rojongan

Einhell products are manufactured to high-quality standards and undergo strict quality controls. This product is covered by a manufacturer's warranty, details of which can typically be found on the official Einhell websitus atanapi dina bungkusan produk.

For warranty claims, technical support, or spare parts, please contact your local Einhell service center or visit the official Einhell website for contact information and further assistance.

Punten tahan bukti pameseran anjeun pikeun klaim garansi.