Nobsound T3 MM Phono Preamppangagung

1. Bubuka

The Nobsound T3 is a Moving Magnet (MM) phono preamplifier designed to convert phono signals from a turntable to line-level signals. This device is essential for connecting a turntable to audio systems that lack a dedicated phono input, such as stereo amplifiers or active speakers. It features a volume control to adjust the output level.

Image: The Nobsound T3 phono preamplifier integrated into a home audio setup with a turntable and speakers.

2. Émbaran Kasalametan

• Pastikeun voltase adaptor dayatage cocog catu daya lokal Anjeun.
• Ulah ngalaan alat ka beueus atawa suhu ekstrim.
• Avoid disassembling the unit; refer servicing to qualified personnel.
• Simpen alatna dina tempat anu datar sareng stabil pikeun nyegah ragrag sacara teu dihaja.
• Jauhkeun tina jangkauan barudak.

3. Eusi Paket

• Nobsound T3 MM Phono Preamppangagung
• DC 12V Power adaptor

Image: The Nobsound T3 phono preamplifier and its included DC 12V power adapter.

4. Produk Langkungview

The Nobsound T3 features a compact design with essential controls and connections for seamless integration into your audio system.

Panel hareup

• Saklar Daya: Toggles the unit on/off. Features a red indicator light when active.
• Tombol VOLUME: Adjusts the output level of the preamppangagung.

Panel tukang

• Terminal GND: Ground connection for the turntable to reduce hum and noise.
• MM INPUT (R/L): RCA inputs for connecting your Moving Magnet (MM) turntable.
• AUDIO OUTPUT (R/L): Kaluaran RCA pikeun nyambungkeun ka anjeun amplifier atawa speaker aktif.
• DC 12V: Input daya pikeun adaptor 12V DC anu kalebet.

Gambar: Detil view of the Nobsound T3's front panel (Power switch, Volume knob) and rear panel (GND, MM Input, Audio Output, DC 12V).

5. Setélan

Follow these steps to connect your Nobsound T3 phono preamplifier to your audio system:

1. Connect Turntable to MM Input: Use RCA cables to connect the audio output of your MM turntable to the MM INPUT (R/L) jacks on the rear panel of the Nobsound T3. Ensure left (white) and right (red) channels are matched.
2. Nyambungkeun Kawat Ground: Attach the ground wire from your turntable to the GND terminal on the Nobsound T3. This helps to minimize hum and noise.
3. Nyambung ka Amppanyatur/Speaker: Use another set of RCA cables to connect the AUDIO OUTPUT (R/L) jacks of the Nobsound T3 to an available line-level input (e.g., AUX, CD, LINE IN) on your amplifier or active speakers. Do not connect to a phono input on your amplifier, as this unit already provides phono pre-amplifikasi.
4. Sambungkeun Kakuatan: Plug the DC 12V power adapter into the DC 12V input on the rear panel of the Nobsound T3, then plug the adapter into a power outlet.
5. Daya Hurung: Pencét éta POWER switch on the front panel to turn on the unit. The red indicator light will illuminate.

Image: Connection diagram illustrating how to integrate the Nobsound T3 into an audio system.

6. Parentah Operasi

Once the Nobsound T3 is properly set up, operating it is straightforward:

1. Ensure all connections are secure and the unit is powered on.
2. Start playing a record on your turntable.
3. Saluyukeun VOLUME knob on the front panel of the Nobsound T3 to achieve the desired output level.
4. Further volume adjustments can be made using your amplifier or active speakers' volume control.

7. Pangropéa

• Clean the unit with a soft, dry cloth. Do not use liquid cleaners or solvents.
• Jaga unit ieu bébas tina lebu sareng kokotor pikeun mastikeun ventilasi anu saé.
• Pariksa sacara berkala sadaya sambungan kabel pikeun pageuh sareng aus.

8. Cara ngungkulan

Taya Kaluaran Sora

• Ensure the Nobsound T3 is powered on (red indicator light is lit).
• Verify all RCA cables are securely connected to the correct input/output jacks.
• Check the volume level on both the Nobsound T3 and your amplifier / speaker aktip.
• Konfirmasi anjeun amplifier/active speakers are set to the correct input source.

Dengung atawa Sora

• Ensure the turntable's ground wire is properly connected to the GND terminal on the Nobsound T3.
• Pariksa sambungan kabel leupas.
• Pindahkeun unit tina alat éléktronik anu sanés anu tiasa nyababkeun gangguan.
• Try using different RCA cables, as faulty shielding can cause hum.

9. Spésifikasi

Image: The Nobsound T3 phono preamplifier shown in hand, highlighting its compact dimensions.

10. Garansi jeung Rojongan

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Douk Audio customer service. Keep your purchase receipt for warranty claims.