HGLRC Forward F765 Flight Stack Instruction Manual

1. Bubuka

This manual provides detailed instructions for the installation, setup, operation, and maintenance of your HGLRC Forward F765 Flight Stack. This advanced flight stack integrates a dual-gyro F7 flight controller and a BLHeli_32 65A 4-in-1 Electronic Speed Controller (ESC), designed for high-performance FPV racing drones. Please read this manual thoroughly before use to ensure proper functionality and safety.

2. Produk Langkungview

The HGLRC Forward F765 Flight Stack is engineered for optimal performance and reliability in FPV applications. It features a robust design with advanced components to provide precise control and efficient power delivery.

Gambar 2.1: HGLRC Forward F765 Flight Stack showing overall dimensions (46mm x 45mm x 25mm).

2.1 Flight Controller (FC) Features

• CPU: STM32F745VGT6
• MPU: Dual gyros, ICM20608 (32K) & MPU6000-SPI, for enhanced flight stability.
• Masukan Voltage: 3-6S Lipo.
• Multiple UART ports for extensive peripheral connectivity.

Gambar 2.2: Pahareup-hareup view of the Flight Controller (top) highlighting the ICM20608, MPU6000, and STM32F745, and the ESC (bottom) with its STM32L431 CPU.

2.2 Electronic Speed Controller (ESC) Features

• CPU: STM32L431, 32-bit high-performance processor.
• Firmware: BLHeli_32.
• Masukan Voltage: 3-6S Lipo.
• Steady Current: 65A.
• Puncak Arus: 75A.
• Integrated CNC multi-function heat sink for efficient heat dissipation and overcurrent protection.
• Supports DSHOT1200/600/300/150, Oneshot125/42, MultiShot protocols.

Gambar 2.3: Leuwihview of the FD765 Stack, indicating the STM32F745VGT6 CPU on the FC and the L431 BLHeli_32 65A ESC with a 75A peak current.

2.3 Desain Inovatif

The stack incorporates an innovative soft mounting design to isolate the gyroscopes from frame vibrations, ensuring a stable and accurate operating environment for precise flight control.

Gambar 2.4: Illustration of the innovative soft design, showing the flight stack and the included rubber grommets for vibration isolation.

3. Spésifikasi

Gambar 3.1: Visual representation of the Flight Controller and ESC specifications.

4. Eusi Paket

Pastikeun yén sadaya item anu didaptarkeun di handap aya dina pakét anjeun:

• 1x HGLRC Forward F765 Flight Controller
• 1x HGLRC Forward 65A 4-in-1 BLHeli_32 ESC
• 1x Connection Cable for FC to ESC
• 1x XT60 Connector
• 1x Electrolytic Capacitor (1000uF 35V)
• 4x M3 screws
• 4x M3 Kacang
• 8x Rubber Grommets (for soft mounting)
• Assorted signal and power wires

Gambar 4.1: All components included in the HGLRC Forward F765 Flight Stack package.

5. Setup & Wiring

Careful attention to wiring is crucial for the proper and safe operation of your flight stack. Refer to the diagrams below for correct connections.

5.1 ESC Wiring Diagram

Connect your motors and battery to the ESC as shown. Ensure correct polarity for the battery connection. The included capacitor should be soldered to the main battery pads (BAT+ and BAT-) on the ESC to filter power noise.

5.2 Flight Controller Connections

The F765 Flight Controller supports various peripherals. Connect your camera, VTX (Video Transmitter), RC Receiver, GPS, and Buzzer according to the diagram. Pay close attention to the correct UARTs and power pins.

5.3 Mounting the Stack

Mount the flight stack onto your drone frame using the provided screws, nuts, and rubber grommets. The soft mounting grommets are essential for reducing vibrations transmitted to the flight controller's gyroscopes, improving flight performance.

Gambar 5.3: The HGLRC Forward F765 Flight Stack correctly installed on a quadcopter frame.

6. Parentah Operasi

After completing the physical installation and wiring, proceed with the software configuration and initial flight checks.

6.1 Firmware Flashing and Configuration

1. Nyambung ka PC: Use a USB cable to connect the flight controller to your computer.
2. Pasang Supir: Ensure necessary drivers (e.g., STM32 Virtual COM Port Driver, Zadig for DFU mode) are installed.
3. Firmware Controller hiber: Open Betaflight Configurator (or your preferred flight control software). Select the correct target for the F765 FC (e.g., HGLRCF765) and flash the latest stable firmware.
4. ESC Firmware: Use BLHeliSuite32 to update and configure the ESCs. Ensure all ESCs are running the same firmware version.
5. Konfigurasi awal: Follow the standard Betaflight setup wizard for sensor calibration, motor direction, receiver setup, and mode assignments.

6.2 Pamariksaan Sateuacan Penerbangan

• Verify all connections are secure and correctly oriented.
• Check motor spin direction in Betaflight Motors tab (with propellers removed).
• Confirm receiver inputs respond correctly in Betaflight Receiver tab.
• Pastikeun vol batrétage and current sensor readings are accurate.
• Perform a range check with your radio system.

7. Pangropéa

Regular maintenance helps ensure the longevity and reliable performance of your HGLRC Forward F765 Flight Stack.

• Inspeksi Visual: Periodically inspect the boards for any signs of damage, loose connections, or burnt components.
• beberesih: Keep the flight stack free from dust, dirt, and moisture. Use compressed air or a soft brush for cleaning. Avoid using liquids directly on the electronics.
• Pembaruan firmware: Regularly check for and apply the latest firmware updates for both the FC (Betaflight) and ESCs (BLHeliSuite32) to benefit from performance improvements and bug fixes.
• Soft Mounts: Inspect the rubber grommets for wear or damage. Replace them if they appear compressed or torn to maintain vibration isolation.

8. Cara ngungkulan

This section addresses common issues you might encounter with your flight stack.

8.1 Isu umum jeung Solusi

• Henteu aya kakuatan:
  • Check battery connection polarity.
  • Inspect main power leads for breaks or poor solder joints.
  • Verify the XT60 connector is properly seated.
• Motors Not Spinning / ESC Protocol Unknown:
  • Ensure the FC-to-ESC cable is correctly connected and not damaged.
  • Verify motor signal wires are connected to the correct pads (M1-M4).
  • Confirm ESC firmware is updated and configured correctly in BLHeliSuite32.
  • Check Betaflight motor output settings and ESC protocol selection.
• Unstable Flight / Excessive Vibrations:
  • Ensure soft mounting grommets are correctly installed and not damaged.
  • Check for loose propellers or damaged motor bearings.
  • Recalibrate accelerometers and gyroscopes in Betaflight.
  • Adjust PID tuning if necessary.
• Taya Sinyal Video:
  • Verify VTX and camera connections to the FC.
  • Check VTX power and ground connections.
  • Ensure VTX is powered on and set to the correct frequency/channel.
• FC Not Connecting to Betaflight:
  • Ensure USB cable is functional and connected securely.
  • Install necessary USB drivers (STM32 Virtual COM Port Driver).
  • If in DFU mode, use Zadig to install the correct driver.
  • Coba port USB atawa kabel béda.

For more detailed troubleshooting, refer to online resources and community forums for Betaflight and BLHeli_32.

9. Jaminan & Dukungan

HGLRC products are designed for performance and reliability. For warranty information and technical support, please refer to the official HGLRC websitus atanapi ngahubungan layanan palanggan maranéhanana langsung.

• Resmi Websitus: Nganjang ka HGLRC Official Websitus for product updates, FAQs, and contact information.
• Palayanan palanggan: For specific issues or warranty claims, contact HGLRC customer support through their websitus.
• Forum Komunitas: Engage with the FPV community on forums and social media for peer support and shared knowledge.

Note: Damage caused by improper installation, misuse, or unauthorized modifications is not covered under warranty.