Bubuka
This manual provides detailed instructions for the assembly, operation, and maintenance of your Yaheetech Mid-Back Mesh Office Chair. Please read all instructions carefully before assembly and use to ensure proper function and safety.
Hareupeun view of the Yaheetech Mid-Back Mesh Office Chair in black.
Émbaran Kasalametan
- For your safety, do not stand on this chair.
- Allow ±1.5cm/0.6inch errors in seat height due to manual measurements.
- Pastikeun sadaya screws na bolts aman tightened saméméh pamakéan.
- Ulah dianggo korsi upami aya bagian anu ruksak atanapi leungit.
Eusi pakét
Pariksa yén sadaya komponén aya sateuacan ngamimitian assembly:
- 1 x Korsi Kantor (komponén anu dibongkar)
- 1 x Manual Parentah
- Parabot Perakitan (sekrup, konci Allen)
Parentah Majelis
Follow these steps to assemble your Yaheetech Office Chair. An assembly video is provided for visual guidance.
Official assembly video for the Yaheetech Office Chair.
- Ngabongkar komponén: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Verify all parts are present according to the package contents list.
- Pasangkeun Roda kana Dasar Béntang: Insert each of the five casters (wheels) into the holes at the end of each leg of the star base. Push firmly until they click into place.
- Selapkeun Angkat Gas: Place the gas lift cylinder into the central hole of the assembled star base.
- Attach Armrests to Backrest: Align the armrests with the pre-drilled holes on the backrest. Insert the screws but do not fully tighten them yet. This allows for minor adjustments during the next steps.
- Attach Backrest/Armrests to Seat: Position the assembled backrest and armrests onto the seat. Align the holes and insert the screws. Again, do not fully tighten at this stage.
- Pasangkeun Mékanisme kana Korsi: Secure the seat mechanism to the underside of the seat using the provided screws. Ensure the front of the mechanism faces the front of the seat. Once all screws are in place for the armrests, backrest, and mechanism, tighten all screws securely.
- Place Assembled Seat onto Gas Lift: Carefully place the assembled seat (with armrests and mechanism attached) onto the top of the gas lift cylinder. The chair is now assembled.
Parentah Operasi
Your Yaheetech Office Chair features several adjustable components for personalized comfort:
Official video demonstrating the features and adjustments of the Yaheetech Office Chair.
- Jangkungna korsi adjustable: To adjust the seat height, pull the lever located under the seat upwards while seated. Release the lever at your desired height. The seat height can be adjusted from 13.8 inches to 17.7 inches.
- Reclining/Rocking Function: Push the lever under the seat outwards to enable the rocking function (90-120 degrees). Pull the lever inwards to lock the chair in an upright position.
- 360-Degree Swivel and Wheels: The chair is equipped with a stable star base and five 360-degree swivel wheels, allowing for fluent and quick movement around your workspace.
- Ergonomic Backrest and Lumbar Support: The curved backrest is designed to align with the natural curve of the human spine, providing consistent lumbar support to your lower back.
- Breathable Mid-Back Design: The densely knitted mesh backrest promotes better airflow, aiding in heat and moisture dissipation for enhanced comfort during prolonged use.
- Comfortable Armrests: The user-friendly armrests offer continuous support for your arms, reducing fatigue.
Visual representation of the chair's rocking motion (90-120 degrees), 360-degree swivel, and adjustable seat height.
Close-up of the breathable mesh backrest, highlighting airflow for comfort.
A hand pressing into the elastic cushion of the chair, demonstrating its comfort.
Pangropéa
To maintain the longevity and appearance of your office chair:
- beberesih: Ngusap bersih nganggo iklanamp lawon. Hindarkeun bahan kimia anu kasar atanapi pembersih abrasive.
- Pamariksaan: Périodik pariksa sagala screws sareng sambungan pikeun mastikeun aranjeunna tetep kedap. Re-tighten lamun perlu.
- Hindarkeun Overloading: Ulah ngaleuwihan rekomendasi beurat maksimum 300 pon.
Pamérésan masalah
Upami anjeun ngalaman masalah sareng korsi anjeun, pertimbangkeun solusi umum ieu:
- Korsi karasa oyag: Pastikeun sadaya sekrup rakitan parantos kenceng pisan. Pariksa yén lift gas parantos dipasang kalayan leres dina dasarna.
- Pangaluyuan jangkungna teu jalan: Verify the lever is fully engaged or disengaged. Ensure no obstructions are preventing the gas lift from moving freely.
- Casters henteu ngagulung lancar: Check for any debris or hair caught in the wheels. Clean as needed.
spésifikasi
| Fitur | Spésifikasi |
|---|---|
| merek | Yaheetech |
| Ngaran modél | Kursi Kantor |
| Nomer Modél Item | YT-0009402202 |
| Warna | Hideung |
| Dimensi produk | 24 "D x 23.6" W x 38.2" H |
| Gaya Balik | Jaring Tukang |
| Fitur husus | Adjustable Height, Arm Rest, Ergonomic |
| Rekomendasi beurat maksimum | 300 pon |
| Bahan | Nylon, Foam (Fill Material) |
| Gerakan Dasar Jati | Puteran |
| Ngadengdekkeun | Sumuhun |
| Komponén Kaasup | 1 x Instructions, 1 x Office Chair |
Diagram illustrating the dimensions of the Yaheetech Mid-Back Mesh Office Chair.
Illustration showing the chair's 300 lb weight capacity and the wide, stable 23.6-inch star base.
Detailed comparison of seat dimensions, cushion thickness, and base width.
Garansi sareng Rojongan
For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official Yaheetech websitus. Simpen resi pameseran anjeun pikeun klaim jaminan.
