Intelbras IVP 2000 SF Wireless Passive Infrared Sensor Instruction Manual

1. Bubuka

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Intelbras IVP 2000 SF Wireless Passive Infrared Sensor. This device is designed to detect motion by sensing infrared radiation emitted by moving objects, providing an essential component for security systems.

2. Émbaran Kasalametan

• Baca sagala parentah taliti saméméh instalasi tur operasi.
• Do not expose the sensor to direct sunlight, extreme temperatures, or high humidity.
• Ensure the device is installed in a stable location to prevent accidental falls.
• Only use the specified battery type. Incorrect battery usage may cause damage or malfunction.
• Jauhkeun alat tina jangkauan barudak.

3. Eusi Paket

Pastikeun yén sadaya item aya dina bungkusan:

• 1x Intelbras IVP 2000 SF Wireless Passive Infrared Sensor
• 1x Pamasangan Bracket
• 1x Set of Screws and Wall Plugs
• 1x Battery (Alkaline)
• 1x Quick Start Guide (this manual)

4. Produk Langkungview

The Intelbras IVP 2000 SF is a wireless passive infrared sensor designed for indoor use. It features advanced detection technology to minimize false alarms and ensure reliable security monitoring.

Gambar 1: Hareupeun view of the Intelbras IVP 2000 SF sensor. This image displays the white casing of the sensor with the Intelbras logo and "IVP 2000 SF" model designation clearly visible on the top front. The translucent detection lens is prominent on the lower front section.

Komponén konci:

• PIR Lens: Detects infrared radiation from moving bodies.
• Indikator LED: Provides status feedback (e.g., detection, low battery).
• Kompartemen batré: Houses the power source.
• Titik Pasang: For secure installation on a wall.
• Tamper Saklar: Triggers an alarm if the sensor cover is opened.

5. Setélan

5.1. Pamasangan batré

1. Open the sensor's front cover by gently prying it open from the bottom notch.
2. Insert the provided alkaline battery into the battery compartment, observing the correct polarity (+/-).
3. Close the front cover, ensuring it clicks securely into place.

5.2. Pasang Sénsor

The sensor is designed for wall mounting. Choose a location that provides optimal coverage of the area to be protected, avoiding direct heat sources or air conditioning vents.

1. Select a mounting height between 2.0 to 2.2 meters (6.5 to 7.2 feet) from the floor.
2. Paké bracket ningkatna salaku citakan pikeun nandaan posisi screw dina témbok.
3. Bor liang dina posisi anu ditandaan teras pasangkeun colokan témbok.
4. Ngamankeun bracket ningkatna kana témbok ngagunakeun screws disadiakeun.
5. Attach the sensor unit to the mounting bracket, ensuring it is firmly seated.

5.3. Pairing with a Security System

Refer to your Intelbras security system or smart hub manual for specific instructions on how to add a new wireless sensor. Generally, the process involves:

1. Putting your security system into "pairing" or "enrollment" mode.
2. Activating the sensor (e.g., by triggering it or pressing a specific button, if available, or by installing the battery for the first time).
3. Confirming successful pairing through the system's interface or LED indicators.

6. Ngoperasikeun Sénsor

6.1. Detection Principle

The IVP 2000 SF sensor operates on the principle of passive infrared (PIR) detection. It detects changes in infrared energy within its field of view, which are typically caused by the movement of a warm body. When a significant change is detected, the sensor transmits a signal to the connected security system.

6.2. Status Indikator LED

• Brief Flash: Indicates motion detection.
• Continuous Flash: May indicate low battery or a fault. Refer to the troubleshooting section.
• Teu aya Cahaya: Normal standby mode, or battery is completely depleted.

6.3. Detection Range and Coverage

The sensor typically offers a detection range of up to 12 meters (39 feet) with a coverage angle of approximately 90 degrees. Optimal performance is achieved when movement occurs across the sensor's field of view rather than directly towards it.

7. Pangropéa

7.1. beberesih

Periodically clean the sensor's lens and casing with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the device.

7.2. Ngagantian batré

When the LED indicator signals a low battery (e.g., continuous flashing or specific system notification), replace the battery promptly. Follow the battery installation steps outlined in section 5.1. Dispose of old batteries according to local regulations.

7.3. Cék Biasa

Test the sensor's functionality regularly (e.g., monthly) by walking through its detection zone to ensure it triggers an alarm or notification on your security system.

8. Cara ngungkulan

9. Spésifikasi

• merek: Intelbras
• model: IVP2000SF
• Sumber Daya: batré powered
• Jenis Batré: Alkali
• Tipe Pamasangan: Tembok dipasang
• Alat anu cocog: Intelbras security systems and smart home hubs
• Ukuran produk: Kira-kira 17 x 10 x 9 cm (6.7 x 3.9 x 3.5 inci)
• Métode deteksi: Infrabeureum pasip (PIR)
• Rentang deteksi: Nepi ka 12 méter (39 suku)
• Sudut deteksi: Kurang leuwih 90 derajat
• Lingkungan Operasi: Pamakéan jero rohangan wungkul

10. Émbaran jaminan

Intelbras products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the official Intelbras websitus atanapi hubungi dukungan palangganna. Simpen bukti pameseran anjeun kanggo klaim garansi.

11. Rojongan

If you encounter any issues or have questions regarding your Intelbras IVP 2000 SF sensor that are not covered in this manual, please contact Intelbras customer support through their official channels:

• Websitus: Nganjang ka Intelbras resmi websitus pikeun sumber rojongan, FAQs, sarta informasi kontak.
• Telepon: Refer to the contact section on the Intelbras websitus pikeun nomer rojongan lokal.