Einhell CE-BC 6 M Microprocessor-Controlled Battery Charger

1. Produk Langkungview

The Einhell CE-BC 6 M is an intelligent, microprocessor-controlled battery charger designed for a wide range of 12V vehicle battery types, including gel, AGM, and maintenance-free/low-maintenance lead-acid batteries. This advanced charger features a multi-stage charging cycle, automatic voltage adaptation (12V), and specialized modes for optimal battery care. Its intelligent electronics analyze the connected battery's type and condition to initiate the most suitable charging process, ensuring a gentle and efficient charge for extended battery life.

Key features include a maintenance charge function to prevent deep discharge, a Winter Mode for charging below 5°C, a Recondition Mode for deeply discharged batteries, and a Power Supply Mode. The unit is equipped with comprehensive safety protections against overload, short circuits, and reverse polarity, safeguarding both the charger and the battery. An LCD display provides real-time information on battery voltage jeung kamajuan ngecas.

Figure 1: Einhell CE-BC 6 M Battery Charger. The device is predominantly red and black, featuring an LCD display that shows '13.4V' and a battery charge indicator. Attached are red and black insulated battery clamps, ready for connection. The top of the unit has a black hanging eyelet for convenient storage.

2. Parentah Kasalametan

Before operating the Einhell CE-BC 6 M battery charger, please read and understand all safety instructions. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Kasalametan Pribadi: Salawasna nganggo pelindung panon sareng pakean pelindung nalika damel sareng batré. Batré tiasa ngahasilkeun gas anu ngabeledug.
• Ventilasi: Ensure the charging area is well-ventilated. Do not operate the charger in a confined space.
• Bahan anu gampang kaduruk: Keep sparks, flames, and smoking materials away from the battery and charger.
• Jenis Batré: This charger is designed for 12V lead-acid, gel, and AGM batteries. Do not attempt to charge non-rechargeable batteries or batteries with different voltage ratings.
• Frozen Batteries: Never attempt to charge a frozen battery. Allow it to thaw before charging.
• Sambungan: Always connect the charger to the battery before plugging it into the mains power supply. Disconnect from the mains before disconnecting the battery.
• Parabot anu ruksak: Do not operate the charger if the power cord, clamps, or charger unit itself is damaged. Contact qualified service personnel for repair.
• Barudak jeung Pets: Jauhkeun carjer sareng batréna tina jangkauan barudak sareng piaraan.
• Sabalikna Polaritasna: The charger has reverse polarity protection, but always double-check connections to prevent damage.

3. Setup jeung Persiapan

1. Ngabongkar: Taliti cabut carjer sareng sadaya asesoris tina bungkusan.
2. mariksa: Check the charger, cables, and clamps for any signs of damage. Do not use if damaged.
3. Ventilasi: Place the charger in a well-ventilated area, away from direct sunlight, heat sources, and moisture.
4. Nyiapkeun batré:
   • For conventional lead-acid batteries, check the electrolyte level and top up with distilled water if necessary (do not overfill).
   • Clean the battery terminals to ensure good electrical contact.
   • Ensure the battery is not frozen.
5. Pamasangan (Opsional): The charger housing includes an eyelet for wall mounting, allowing for convenient storage and use.

4. Parentah Operasi

4.1. Nyambungkeun carjer

1. Sambungkeun Positip: Attach the red (+) battery clamp ka terminal positif (+) batré.
2. Sambungkeun Negatif: Attach the black (-) battery clamp ka terminal négatip (-) batré.
3. Connect to Mains: Plug the charger's power cord into a standard 230V AC wall outlet. The charger will power on and perform an initial self-check.

4.2. Selecting Charging Mode

The Einhell CE-BC 6 M automatically detects the battery type and condition. Use the mode button (if present, or refer to the display for automatic selection) to cycle through available modes if manual selection is required for specific functions.

• Biaya standar: The charger will automatically select the appropriate multi-stage charging cycle for 12V batteries.
• Winter Mode (below 5°C): Activates a specialized charging curve for optimal performance in cold temperatures.
• Modeu Rekondisi: Designed to revive deeply discharged batteries. This mode applies a specific charging profile to attempt recovery.
• Modeu catu daya: Allows the charger to function as a stable 12V power supply, useful for maintaining vehicle electronics during battery changes or diagnostics.

4.3. Monitoring the Charging Process

Layar LCD nyayogikeun inpormasi sacara real-time:

• Batré Voltage: Némbongkeun vol ayeunatage tina batré disambungkeun.
• Kamajuan Ngecas: Nunjukkeun s ayeunatage of the charging cycle.
• Indikator Mode: Displays the active charging mode (e.g., Winter, Recondition).
• Status batré: A graphical representation of the battery's charge level.

The charger will automatically switch to maintenance charge mode once the battery is fully charged, preventing overcharging and maintaining optimal battery health.

4.4. Disconnecting the Charger

1. Disconnect Mains: Unplug the charger's power cord from the wall outlet.
2. Disconnect Negative: Detach the black (-) battery clamp from the negative (-) terminal of the battery.
3. Disconnect Positive: Detach the red (+) battery clamp from the positive (+) terminal of the battery.

5. Pangropéa sareng Panyimpenan

• beberesih: Disconnect the charger from the mains and battery before cleaning. Wipe the exterior with a soft, dry cloth. Do not use solvents or abrasive cleaners.
• Pamariksaan kabel: Regularly inspect the power cord and battery cables for any signs of damage, fraying, or exposed wires. Replace damaged cables immediately.
• Clamp perawatan: Tetep batré clamps clean and free of corrosion to ensure good electrical contact.
• Panyimpenan: Store the charger in a cool, dry place, away from direct sunlight and moisture. Ensure cables are neatly coiled and not kinked.
• Panyimpenan Jangka Panjang: If the charger is not used for an extended period, ensure it is stored in its original packaging or a protective container.

6. Cara ngungkulan

7. Spésifikasi Téknis

8. Garansi jeung Rojongan

Einhell products are manufactured to high-quality standards and undergo strict quality controls. This product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Einhell websitus.

It is recommended to register your product for warranty purposes, which may extend the warranty period (e.g., to 3 years as mentioned in some product information). Keep your proof of purchase for any warranty claims.

Rojongan Palanggan

For technical assistance, spare parts, or warranty inquiries, please contact Einhell customer service. Contact details can typically be found on the official Einhell websitus atanapi dina dokuméntasi produk.

Nalika ngahubungi dukungan, punten siapkeun inpormasi ieu:

• Product Model: CE-BC 6 M
• Nomer Artikel: 1002235
• Tanggal Meuli
• Pedaran ngeunaan masalah