CaDA C64010 Licensed Formula 1 Building Block Set User Manual

1. Bubuka

Welcome to the user manual for the CaDA C64010 Licensed Formula 1 Building Block Set. This manual provides essential information for assembling, operating, and maintaining your 1:8 scale model of a modern open-wheel race car. Designed for enthusiasts aged 14 and above, this set offers a detailed and engaging building experience with 2,553 precision-molded pieces.

The model authentically replicates the design and engineering of a Formula 1 race car, featuring aerodynamic elements, functional mechanical components, and a sophisticated steering and suspension system. Please read this manual thoroughly before beginning assembly to ensure a smooth and enjoyable building process.

Figure 1.1: Fully assembled CaDA C64010 Formula 1 model.

This image displays the completed CaDA C64010 model from an angled front perspective, highlighting its sleek design, intricate aerodynamic features, and vibrant green and black color scheme. The detailed wheels and sponsor decals are also visible.

2. Émbaran Kasalametan

Please observe the following safety guidelines to ensure a safe building experience:

• Perhatosan Bagian Leutik: This set contains small parts which may pose a choking hazard for children under 3 years of age. Keep all components out of reach of young children.
• Umur Disarankeun: This product is recommended for builders aged 14 years and up.
• Ngan pamakéan éksternal: This product is designed for assembly and display. It is not intended for consumption or internal use.
• Penanganan: Handle pieces carefully to avoid breakage or injury.
• pembuangan: Buang bahan bungkusan anu tanggung jawab.

3. Eusi Paket

Upon opening the product packaging, please verify that all components are present and accounted for. The CaDA C64010 set includes:

• Approximately 2,553 precision-molded building block pieces.
• Manual instruksi lengkep pikeun perakitan.
• All necessary printed elements (no stickers required).

If any pieces are missing or damaged, please refer to the "Warranty and Support" section for assistance.

Figure 3.1: CaDA C64010 Product Packaging.

This image shows the retail box for the CaDA C64010 building block set, featuring an image of the assembled model and key product information such as the model number, piece count, and recommended age.

4. Setup jeung Majelis

Assembly of the CaDA C64010 model requires careful attention to detail and adherence to the provided instruction manual. Follow these general steps:

1. Persiapan: Clear a large, well-lit workspace. Organize your pieces by color and type to facilitate easier identification during the build.
2. Turutan parentah: Refer to the included detailed instruction manual. Each step is illustrated to guide you through the assembly process.
3. Idéntifikasi potongan: Pay close attention to the shape and size of each piece as depicted in the manual. The set uses printed elements, eliminating the need for stickers.
4. Systematic Building: Build the model section by section as outlined in the manual. Do not skip steps.
5. Sambungan Aman: Pastikeun sadaya blok dipencet pageuh babarengan pikeun nyiptakeun sambungan anu stabil.

The assembly process is designed to be stimulating and rewarding, typically taking several hours to complete due to the high piece count and intricate design.

5. Operating Functional Components

The CaDA C64010 model is engineered with several functional mechanical components that enhance its realism and interactivity:

5.1. Working V6 Engine

The model features a detailed V6 engine connected to the rear wheels. When the car is moved, the internal components of the engine will visibly operate, simulating a real engine's movement. The quick-release hood provides easy access to the engine bay for observation.

Figure 5.1: Internal Mechanics and V6 Engine.

Gambar ieu nyadiakeun overhead view of the CaDA C64010 chassis without the top bodywork, clearly showing the intricate V6 engine assembly, gearbox, and other internal mechanical linkages that drive the rear wheels.

5.2. Steering System

The front wheels are connected to an operable steering system. This system can be manually controlled from the cockpit, allowing you to turn the front wheels left and right, mimicking the steering action of a real Formula 1 car.

Gambar 5.2: Frontal View and Steering Mechanism.

This image presents a direct frontal view of the CaDA C64010 model, emphasizing the detailed front wing assembly and the articulation of the front wheels, which are part of the functional steering system.

5.3. Independent Suspension System

The model features an independent suspension system on all four wheels. This design replicates the structural mechanics found in high-performance race cars, allowing each wheel to move independently and absorb minor impacts, adding to the model's realistic appearance and functionality.

Gambar 5.3: Side Profile and Suspension System.

Ieu sisi profile image of the CaDA C64010 model clearly illustrates the independent suspension system on all four wheels, along with the detailed tire tread and wheel design.

5.4. Interchangeable Driver Number Panels

The set includes multiple printed elements that allow you to customize the car's appearance by swapping between different racing numbers. This feature enhances the realism and provides flexibility in display options.

Gambar 5.4: Tukangeun View and Customization Options.

This image provides an angled rear view of the CaDA C64010 model, showcasing the intricate rear wing, diffuser, and the wide rear tires. The design elements for interchangeable driver number panels are also visible.

6. Pangropéa

To ensure the longevity and appearance of your CaDA C64010 model, follow these simple maintenance tips:

• beberesih: Usap model sacara rutin nganggo lawon anu lemes sareng garing atanapi sikat anu lemes. Pikeun kokotor anu langkung bandel, usap sakedikamp lawon bisa dipaké, tapi ulah Uap kaleuleuwihan. Ulah make bahan kimia kasar atawa cleaners abrasive.
• Panyimpenan: Simpen modél ieu di tempat anu tiis, garing, sareng jauh tina sinar panonpoé langsung pikeun nyegah parobahan warna atanapi bengkokna potongan plastik.
• Penanganan: Handle the model by its sturdy sections to avoid putting stress on delicate parts.
• Pembongkaran: If disassembling, do so carefully to avoid damaging the connection points of the blocks.

7. Cara ngungkulan

While building the CaDA C64010 set is generally straightforward, you might encounter minor issues. Here are some common troubleshooting tips:

• Potongan anu leungit: Double-check the packaging and your workspace. If a piece is genuinely missing, refer to the "Warranty and Support" section for information on obtaining replacement parts.
• Kasusah Nyambungkeun Potongan: Ensure pieces are correctly oriented and aligned. Apply firm, even pressure. If a piece seems too tight, verify it is the correct piece for that step.
• Instabilitas Struktural: Review previous steps to ensure all connections are secure and no pieces were missed or incorrectly placed. A loose connection can affect the stability of subsequent sections.
• Functional Components Not Moving: For the engine or steering, ensure all gears and linkages are correctly assembled and free from obstruction. Re-check the relevant assembly steps in the manual.

8. Spésifikasi

9. Garansi jeung Rojongan

For information regarding product warranty, replacement parts, or further technical support, please refer to the documentation included with your product packaging or visit the official CaDA website. Contact details for customer service are typically provided on the manufacturer's official support pages.

Please have your model number (C64010W) and proof of purchase ready when contacting support.