Manual+

Webéta 7661

Weber Handle Grill 'N Go Light (Model 7661) Instruction Manual

Your comprehensive guide to setting up, operating, and maintaining your Weber Handle Grill 'N Go Light.

Bubuka

Hatur nuhun pikeun milih éta Weber Handle Grill 'N Go Light. This multifunctional grill light is designed to enhance your grilling experience by providing illumination where you need it most. It easily attaches to your grill handle and features a motion sensor for convenient operation. This manual provides detailed instructions to ensure proper use and longevity of your product.

Disetél

1. Pamasangan batré

The Grill 'N Go Light requires 3 AAA batteries, which are included. To install or replace batteries:

  1. Locate the battery compartment on the underside of the light unit.
  2. Ngagunakeun obeng sirah Phillips leutik, taliti nyabut screws securing panutup batré.
  3. Pasangkeun 3 batré AAA, pastikeun polaritasna bener (+/-).
  4. Ganti panutup batré jeung tighten screws.

2. Attaching to Grill Handle

The light is designed to securely attach to the handle of compatible Weber grills (Spirit, Genesis, and Summit models).

  1. Ngajajar clamp mechanism of the light with your grill's handle.
  2. Gently press the light onto the handle until it clicks securely into place. Ensure it is firmly attached and does not wobble.
  3. The light can be slid along the handle to adjust its position for optimal illumination.
Weber Handle Grill 'N Go Light attached to a grill handle

Gambar: The Weber Handle Grill 'N Go Light securely attached to a grill handle.

Parentah Operasi

1. Powering on / Pareum

Weber Handle Grill 'N Go Light with LED illuminated

Image: The LED light of the Grill 'N Go Light illuminated.

2. Detachable Functionality

The Grill 'N Go Light can be easily detached from the handle to provide extra light wherever needed. Simply slide the light off the clamp mechanism to use it as a portable light source.

Hand holding the detached Weber Handle Grill 'N Go Light

Image: A hand holding the Weber Handle Grill 'N Go Light after detaching it from the grill handle.

Weber grill illuminated by the Grill 'N Go Light at night

Gambar: A Weber grill with food cooking, brightly illuminated by the attached Grill 'N Go Light during nighttime.

Pangropéa

beberesih

Ngusap lampu sareng iklanamp cloth to remove any grease or debris. Do not submerge the unit in water or use abrasive cleaners.

Perawatan batré

Replace batteries when the light dims or stops functioning. Remove batteries if the unit will not be used for an extended period to prevent leakage.

Panyimpenan

Store the Grill 'N Go Light in a dry place when not in use, especially during adverse weather conditions, to prolong its lifespan.

Pamérésan masalah

Masalah Mungkin Cukang lantaranana Solusi
Lampu henteu hurung. Batré paéh atawa salah dipasang. Pariksa polaritasna batré jeung ngaganti lamun perlu.
Light does not turn on automatically. Motion sensor is off or obstructed. Ensure the manual switch is in the 'On' position. Clear any obstructions from the sensor area.
Light remains on when grill lid is closed. Motion sensor malfunction or obstruction. Check for debris near the sensor. If the issue persists, try resetting the light by removing and reinserting batteries.

spésifikasi

Ukuran tina Weber Handle Grill 'N Go Light

Gambar: Diagram anu nunjukkeun diménsi tina Weber Handle Grill 'N Go Light.

Garansi sareng Rojongan

For information regarding product warranty, please refer to the warranty card included with your purchase or visit the official Weber website. For further assistance or support, please contact Weber customer service.