TOTAL P20S 20V Cordless Compressor Gun Instruction Manual

1. Bubuka jeung Leuwihview

Thank you for choosing the TOTAL P20S 20V Cordless Compressor Gun. This electric air pump is designed for efficient inflation of various items, including vehicle tires, sports balls, and inflatable mattresses. This manual provides essential information for safe operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your tool.

Gambar 1.1: The TOTAL P20S 20V Cordless Compressor Gun. This image displays the main unit with its attached hose and inflation nozzle, ready for use. The battery is shown as a placeholder, indicating it is sold separately.

2. Parentah Kasalametan

Salawasna turutan pedoman kaamanan ieu pikeun nyegah tatu sareng karusakan kana alat:

• Read all instructions carefully before operating the compressor gun.
• Wear appropriate personal protective equipment, such as eye protection.
• Pastikeun wewengkon gawé téh well-cahayana sarta jelas tina halangan.
• Jauhkeun barudak sareng jalma anu aya di tempat operasi.
• Do not operate the compressor for more than 30 menit berturut-turut to prevent overheating. Allow the tool to cool down before resuming use.
• Always verify the recommended pressure for the item being inflated (e.g., vehicle tires, balls) from the manufacturer's specifications before inflation.
• Ulah ngarahkeun nozzle ka diri anjeun atanapi ka batur.
• Simpen alat dina tempat anu garing, aman, jauh tina jangkauan barudak.
• Use only TOTAL P20S 20V batteries and chargers with this device.

3. Komponén produk

The TOTAL P20S 20V Cordless Compressor Gun package includes the following items:

• 1 x Cordless Compressor Gun (Model TACLI2001)
• 1 x Ball Inflation Adapter
• 1 x Tire Inflator Nozzle

Catetan: The 20V P20S battery and charger are teu kaasup and must be purchased separately. These components are interchangeable with other tools in the TOTALTOOLS P20S range.

Gambar 3.1: The compressor gun displayed with its analog pressure gauge and included accessories: a ball inflation adapter and a tire inflator nozzle. The image also reminds that the battery and charger are not included.

4. Setélan

1. Ngeusi batre: Ensure your TOTAL P20S 20V battery is fully charged using a compatible TOTAL P20S charger (both sold separately).
2. Pasang Batré: Slide the charged battery into the battery slot at the base of the compressor gun until it clicks securely into place.
3. Attach Nozzle/Adapter: Select the appropriate inflation nozzle or adapter for the item you intend to inflate. Securely attach it to the end of the 40 cm inflation hose.
4. Pariksa sambungan: Verify that all connections are tight to prevent air leakage during operation.

5. Parentah Operasi

1. Prepare Item for Inflation: Position the item to be inflated in a stable manner.
2. Sambungkeun Nozzle: Firmly attach the selected nozzle or adapter to the valve of the item you are inflating.
3. Monitor Tekanan: The compressor gun features an analog pressure gauge. Continuously monitor the pressure reading during inflation to avoid over-inflation. The maximum supported pressure is 150 Psi / 10 Bar.
4. Mimitian Inflasi: Press and hold the trigger to begin inflating. Release the trigger to stop.
5. Check Recommended Pressure: Always inflate to the manufacturer's recommended pressure. For vehicle tires, this information is typically found on a sticker inside the driver's side door jamb or in the vehicle's owner's manual.
6. Hindarkeun Overheating: Do not operate the compressor for more than 30 minutes continuously. If prolonged use is required, allow the unit to cool down for at least 15-20 minutes after each 30-minute cycle.
7. Pegatkeun sambungan: Once the desired pressure is reached, release the trigger and carefully disconnect the nozzle from the item's valve.

Gambar 5.1: A lengkep view of the compressor gun's analog pressure gauge, which displays pressure in Psi and Bar, and the attached inflation nozzle. This gauge is essential for monitoring inflation levels.

6. Pangropéa

Regular maintenance ensures the longevity and efficient operation of your compressor gun:

• beberesih: After each use, wipe down the compressor gun with a clean, damp lawon. Ulah make bahan kimia kasar atawa cleaners abrasive.
• Panyimpenan: Store the tool and its accessories in a dry, dust-free environment, away from direct sunlight and extreme temperatures.
• Inspeksi selang: Periodically inspect the 40 cm inflation hose for any signs of wear, cracks, or damage. Replace if necessary.
• Perawatan batré: Simpen batréna di tempat anu tiis sareng garing. Ulah nyimpen batré anu tos béak tanaga salami lami.
• Pangropéa Nozzle: Keep inflation nozzles clean and free of debris to ensure proper sealing.

7. Cara ngungkulan

8. Spésifikasi

9. Garansi jeung Rojongan

The TOTAL P20S 20V Cordless Compressor Gun (Model TACLI2001) comes with a manufacturer's warranty of 10 taun. Spare parts are also available for a period of 10 years from the date of purchase.

For technical support, warranty claims, or inquiries regarding spare parts, please contact TOTAL customer service through your retailer or the official TOTAL website. When contacting support, please have your model number (TACLI2001) and proof of purchase readily available.