Bubuka
The Mesqool CR1008i Loud Alarm Clock is designed to provide a reliable wake-up experience for heavy sleepers and individuals with hearing impairment. It features multiple alarm modes, a large LED display with adjustable brightness, a 7-color nightlight, and convenient dual USB charging ports.
Naon dina Box
- Jam Alarm nyaring
- Pesanggrahan Pesanggrahan
- Manual pamaké
- Adaptor kakuatan
- Kabel 1.5 Méter
Disetél
Ngahurungkeun Jam Alarm
- Connect the provided Power Adapter to the DC 5V IN port on the back of the alarm clock.
- Plug the Power Adapter into a standard electrical outlet. The display will light up.
- For battery backup, open the battery compartment on the back and insert 2 AAA batteries (not included). This will preserve time and alarm settings during a power outage.
Figure 1: Rear panel with power input, USB ports, and battery compartment. Insert 2 AAA batteries for backup power.
Connecting the Bed Shaker
- Plug the Bed Shaker cable into the dedicated vibrator port on the back of the alarm clock.
- Place the bed shaker under your pillow or mattress for effective vibration. The 70.8-inch long cord provides flexibility in placement.
Figure 2: The bed shaker positioned under a pillow for silent, vibrating alarm.
Parentah Operasi
Nyetél Waktos
- Pencét jeung tahan tombol WAKTU WAKTU button on the top panel. The hour digits will begin to flash.
- Ngagunakeun éta + or - tombol pikeun nyaluyukeun jam.
- Pencét WAKTU WAKTU again to confirm the hour and move to minute adjustment. The minute digits will flash.
- Ngagunakeun éta + or - tombol pikeun nyaluyukeun menit.
- Pencét WAKTU WAKTU one more time to save the time setting.
- Pikeun pindah antara format 12-jam jeung 24-jam, pencét tombol 12/24H kancing.
- To activate or deactivate Daylight Saving Time (DST), press the DST kancing.
Setting Alarms (AL1 & AL2)
The clock supports two independent alarms (AL1 and AL2).
- Pencét jeung tahan tombol AL1 or AL2 tombol. Angka jam alarm bakal kedip-kedip.
- Ngagunakeun éta + or - tombol pikeun nyetel jam alarm anu dipikahoyong.
- Pencét AL1 or AL2 again to confirm the hour and set the minutes. The alarm minute digits will flash.
- Ngagunakeun éta + or - tombol pikeun nyetel menit alarm anu dipikahoyong.
- Pencét AL1 or AL2 one more time to save the alarm setting.
- To choose the alarm mode (Buzzer, Vibrator, or Both), use the BUZZ/VIB slide switch on the side of the clock.
- To adjust the alarm volume, use the Jilid ALARM slide switch on the side of the clock (Low, Medium, High).
Gambar 3: Sisi view of the alarm clock with slide switches for selecting alarm mode (Buzzer, Vibrator, or Both) and alarm volume.
Video 1: Demonstrates the Mesqool Loud Alarm Clock with Bed Shaker, showcasing its three awake modes: bed shaker, buzzer, or both.
Fungsi Snooze
- Lamun alarm disada, pencét badag SNOOZE OK button on the top of the clock to activate snooze. The alarm will pause for 9 minutes.
- Pikeun mareuman alarm lengkep, pencét tombol ALARM MATI kancing.
Figure 4: The prominent snooze button on top of the alarm clock for easy access.
Lampu Peuting & Dimmer
- The alarm clock features a 7-color night light. Press the SNOOZE OK button (which also functions as the light button) to cycle through the 7 colors or turn the night light off.
- The 7-inch LED display has a full slider dimmer (0%-100%). Use the DIMMER slide switch on the side of the clock to adjust the display brightness to your preference.
Figure 5: The alarm clock showcasing its 7-color night light options.
Video 2: Features the digital alarm clock with its 7 colored night light, demonstrating the various color options.
Dual USB ngecas palabuhan
- The alarm clock is equipped with two DC 5V/1A output USB charging ports on the back.
- Connect your smartphones, tablets, or other USB-powered devices to these ports for convenient charging.
Figure 6: Two smartphones charging simultaneously using the dual USB ports on the alarm clock.
Pangropéa
- Clean the alarm clock and bed shaker with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Pastikeun alat geus cabut colokan saméméh beberesih.
- Jauhkeun alat tina cai sareng kalembaban anu luhur.
Pamérésan masalah
No Display / Power Issue
- Check if the power adapter is securely plugged into both the clock and the wall outlet.
- Ensure the wall outlet is functioning correctly by plugging in another device.
- If using battery backup, ensure batteries are correctly inserted and not depleted.
Alarm Not Sounding/Vibrating
- Verify that the alarm (AL1 or AL2) is activated and set to the correct time.
- Pariksa BUZZ/VIB slide switch to ensure the desired mode (Buzzer, Vibrator, or Both) is selected.
- Saluyukeun Jilid ALARM slide switch to a higher setting if the buzzer is too quiet.
- Ensure the bed shaker is properly connected to its port.
Display Too Bright/Dim
- Ngagunakeun éta DIMMER slide switch on the side of the clock to adjust the display brightness.
spésifikasi
| Fitur | Rincian |
|---|---|
| merek | Mesqool |
| Nomer modél | Cr1008i |
| Tipe tampilan | LED digital |
| Ukuran tampilan | 7 inci |
| Dimmer | 0-100% Full Range Slider |
| Modeu alarem | Bed Shaker, Buzzer, or Both |
| Cahaya Peuting | 7 kelir |
| Port ngecas USB | 2 (DC 5V/1A output) |
| Nyadangkeun batré | Batré AAA 2 x 1.5V (teu kalebet) |
| Sumber Daya | Kabel Listrik |
| Dimensi produk | 6.46"L x 3.39"H x 1.93"W |
| Item Beurat | 8 ons |
