AKO 372920

AKO Sun Power S 250 Solar Fence Energizer

Manual pamaké

Bubuka

The AKO Sun Power S 250 is a highly efficient, compact solar fence energizer designed for reliable operation in various agricultural settings. This device is ideal for managing paddocks and small fences, particularly those without dense vegetation, ensuring the safety and containment of your animals.

Equipped with intelligent battery management, the Sun Power S 250 offers extended autonomy, capable of operating for up to two weeks without direct sunlight. It also features deep discharge protection, indicated by a red flashing light when battery voltage drops below 11.2 V, safeguarding the battery's lifespan.

AKO Sun Power S 250 Solar Fence Energizer front view

Gambar 1: Hareupeun view of the AKO Sun Power S 250 Solar Fence Energizer, showcasing its integrated solar panel and robust green casing.

Disetél

Proper setup is crucial for the optimal performance of your AKO Sun Power S 250. Follow these steps to ensure effective operation:

  1. panempatan: Choose a location for the energizer that receives maximum direct sunlight throughout the day. Avoid shaded areas from trees, buildings, or dense vegetation. The solar panel should face south (in the Northern Hemisphere) for best results.
  2. Pamasangan: The energizer can be mounted on a fence post or a dedicated stand. Ensure it is securely fastened to prevent movement or damage from wind or animals.
  3. Grounding: Connect the energizer's ground terminal (usually marked with a ground symbol or "EARTH") to a suitable ground rod. The ground rod should be driven deep into moist soil, away from other electrical grounds. A good ground system is essential for effective fence performance.
  4. Sambungan pager: Connect the energizer's fence terminal (usually marked with a lightning bolt or "FENCE") to your electric fence line. Use insulated wire designed for electric fences to prevent energy loss.
  5. Sambungan batré: Ensure the internal 12V battery is properly connected. The intelligent battery management system will optimize charging from the solar panel.
AKO Sun Power S 250 mounted on a fence post with horses in the background

Figure 2: The AKO Sun Power S 250 installed on a wooden fence post, demonstrating its use in a pasture with horses. The solar panel is clearly visible, positioned to capture sunlight.

AKO Sun Power S 250 mounted on a fence post with electric fence tape

Gambar 3: A ngadeukeutan view of the AKO Sun Power S 250 attached to a fence post, with white electric fence tape extending from it. This illustrates a typical installation scenario for small fences.

Parentah Operasi

Once properly set up, the AKO Sun Power S 250 operates largely autonomously. Here are key operational aspects:

Tukangeun view of AKO Sun Power S 250 showing battery compartment and terminals

Gambar 4: Tukangeun view of the AKO Sun Power S 250, showing the battery compartment, power switch, and connection terminals for fence and ground wires. This view is essential for understanding wiring and controls.

Pangropéa

Regular maintenance ensures the longevity and efficiency of your solar fence energizer:

Pamérésan masalah

If your AKO Sun Power S 250 is not performing as expected, consider the following common issues and solutions:

MasalahMungkin Cukang lantarananaSolusi
No fence pulse / Weak pulse
  • batré low voltage
  • Grounding goréng
  • Fence shorting out (vegetation, broken insulators)
  • sambungan leupas
  • Ensure solar panel is clean and receiving direct sunlight. Allow time for battery to charge.
  • Check ground rod connection and ensure it's in moist soil. Add more ground rods if necessary.
  • Inspect fence line for vegetation touching wires or damaged insulators. Clear vegetation and repair insulators.
  • Tighten all connections at the energizer and along the fence line.
Red light flashing (low battery indicator)
  • Cahaya panonpoe teu cekap pikeun ngecas
  • Excessive fence load (short circuit)
  • Batré ngadeukeutan tungtung umur
  • Relocate energizer to a sunnier spot or clear obstructions.
  • Check fence for shorts.
  • Consider replacing the 12V battery if it no longer holds a charge.
Energizer not turning on
  • Saklar listrik pareum
  • batré lengkep discharged
  • Kasalahan internal
  • Ensure power switch is in the "ON" position.
  • Allow unit to charge in direct sunlight for at least 24-48 hours.
  • If issues persist after charging and checking connections, contact customer support.

spésifikasi

FiturRincian
Nomer modél372920
merekAKO
Sumber Daya12V Solar Powered
Maximum Fence Length (without vegetation)Nepi ka 3 km
Manajemén batréIntelligent battery management with deep discharge protection
Indikator Batré LemahRed flashing light at <11.2 V
Ukuran Paket31 x 25 x 17 cm
Item Beurat3.91 kg
ProdusénAlbert Kerbl GmbH

Garansi sareng Rojongan

For specific warranty details and customer support, please refer to the documentation provided with your purchase or visit the official AKO website. Warranty terms typically cover manufacturing defects and vary by region and retailer.

For technical assistance, troubleshooting beyond this manual, or spare parts inquiries, please contact AKO customer service or your authorized dealer. Keep your purchase receipt and model number (372920) handy when contacting support.

Note: Information regarding spare parts availability was not provided in the product data. Please consult the manufacturer for details.

Dokumén Patali - 372920

Praview AKO Gas Leak Detection Alarm User Manual: Models AKO-55624 & AKO-55724
Comprehensive user manual for AKO Gas Leak Detection Alarm systems, covering models AKO-55624 and AKO-55724. Includes equipment description, installation, configuration, operation, technical specifications, and accessories.
Praview Manual de Usuario Transmisor de Gas V3 AKO-575xxx
Manual de usuario detallado para el Transmisor de Gas V3 AKO-575xxx de AKO Electromecánica. Cubre instalación, funcionamiento, configuración, mantenimiento, especificaciones técnicas y accesorios.
Praview AKO-575xxx Gas Transmitter User Manual
Comprehensive user manual for the AKO-575xxx Gas Transmitter, covering installation, operation, configuration, maintenance, technical specifications, and troubleshooting.
Praview AKO V3 Gas Transmitter User Manual
User manual for the AKO V3 Gas Transmitter (model AKO-575xxx), detailing installation, operation, configuration, and technical specifications for accurate gas detection. Includes NB-IoT cloud integration information.
Praview AKO-575xxx Gasgeber V3 Benutzerhandbuch
Umfassendes Benutzerhandbuch für den AKO-575xxx Gasgeber V3 von AKO. Enthält detaillierte Anleitungen zu Installation, Konfiguration, Betrieb, Wartung und technischen Daten für professionelle Anwendungen.
Praview AKO-555244 Alarm Control Unit - Instructions and Technical Manual
Comprehensive instructions and technical specifications for the AKO-555244 alarm control unit, designed for machine rooms and chamber safety. Covers installation, connections, configuration, operation, parameters, and technical details.