ANENG V7 Digital Multimeter Instruction Manual

1. Bubuka

This manual provides detailed instructions for the safe and effective use of the ANENG V7 Digital Multimeter. The ANENG V7 is a versatile, high-accuracy digital multimeter featuring a 6000-count HD LCD display with backlight, making readings clear in various lighting conditions. It offers a wide range of measurements including AC/DC voltage, AC/DC current, resistance, capacitance, frequency, temperature, diode, and continuity. Key advantages include True RMS measurement, auto-ranging, non-contact voltage (NCV) detection, data hold, backlight, and auto power-off, making it a reliable tool for electrical testing in various environments.

2. Émbaran Kasalametan

PERHATOSAN: Pikeun nyingkahan kamungkinan sengatan listrik, kahuruan, atanapi tatu pribadi, mangga baca sadaya inpormasi kaamanan sateuacan nganggo produk ieu.

• Salawasna pastikeun multimeter aya dina fungsi sareng rentang anu leres sateuacan ngukur.
• Ulah nerapkeun leuwih ti dipeunteun voltage, sakumaha ditandaan dina méter, antara terminal atawa antara sagala terminal jeung taneuh taneuh.
• Paké caution nalika gawé bareng voltagnyaeta luhur 30V AC RMS, 42V puncak, atawa 60V DC. Ieu voltagÉta nyababkeun bahaya shock.
• Sateuacan ngukur arus, pastikeun sirkuit teu dicas sareng méter disambungkeun séri sareng beban.
• Ulah ngukur résistansi, kontinuitas, atawa dioda dina sirkuit anu hurung.
• Pariksa heula kabel uji pikeun insulasi anu ruksak atanapi logam anu kakeunaan sateuacan dianggo. Ganti upami ruksak.
• Ulah ngoperasikeun méteran upami katingalina ruksak atanapi upami wadahna dibuka.
• Remove test leads from the meter before opening the battery cover or fuse cover.
• Ganti batréna pas indikator batré lemah némbongan pikeun mastikeun bacaan anu akurat.
• Patuh kana kode kaamanan lokal sareng nasional.

3. Produk Langkungview

The ANENG V7 Digital Multimeter is designed for ease of use and reliability. Below is an overview of its main components and display features.

Gambar 3.1: Hareupeun view of the ANENG V7 Digital Multimeter, showing the display, rotary dial, and input jacks.

Gambar 3.2: Detil view of the multimeter's panel display, indicating various measurement functions and indicators such as capacitance, resistance, on-off detection, temperature, DC/AC voltage, jeung ayeuna.

Figure 3.3: Explanation of button functions including MAX/MIN for maximum and minimum values, REL for relative value measurement, SELECT for function switching, NCV for non-contact detection, Flashlight, and HOLD for data retention/screen brightness.

Gambar 3.4: Sisi view of the multimeter highlighting physical features such as the test line pen slot, a hole for hanging on a wall, and the integrated flashlight.

4. Setélan

4.1 Pamasangan batré

The ANENG V7 Multimeter typically uses standard batteries (e.g., AA or 9V, check the battery compartment for specifics). To install or replace batteries:

1. Pastikeun multimeter dipareuman sareng pegatkeun sadaya kabel tés tina terminal input.
2. Teangan tempat panutup kompartemen batré dina tonggong unit.
3. Paké obeng pikeun muka kompartemen batré.
4. Insert new batteries, observing the correct polarity (+ and -).
5. Ganti panutup kompartemen batré jeung amankeun ku screw nu.

4.2 Nyambungkeun Test Leads

Always connect the black test lead to the "COM" (common) jack. Connect the red test lead to the appropriate input jack based on the measurement you intend to make:

• Pikeun Voltage, Resistance, Capacitance, Frequency, Diode, Continuity, and Temperature measurements: Connect the red lead to the "VΩHz-II+" jack.
• For Current (mA/µA) measurements: Connect the red lead to the "mAµA" jack.
• For High Current (A) measurements: Connect the red lead to the "20A" jack.

5. Parentah Operasi

The ANENG V7 features both auto-ranging and manual mode capabilities. The intelligent recognition function simplifies operation for common measurements.

Figure 5.1: The intelligent anti-burn feature with smart recognition helps prevent damage from incorrect settings, especially when the rotary dial is set to 'AUTO'.

5.1 Basic Measurement Steps

1. Turn the rotary dial to the desired function (e.g., V~ for AC Voltage, V- pikeun Voltase DCtage, Ω for Resistance, etc.). For most common measurements, the "AUTO" setting will automatically detect the type of measurement.
2. Connect the test leads to the circuit or component you wish to measure, ensuring correct polarity and connection points.
3. Baca nilai pangukuran dina layar LCD.
4. After measurement, disconnect the test leads from the circuit, then from the multimeter.
5. Turn the rotary dial to "OFF" when not in use to conserve battery life.

5.2 Fungsi Pangukuran Husus

• DC/AC Voltage Measurement (V-, V~):

  Set the rotary dial to V- (DC) or V~ (AC) or AUTO. Connect test leads in parallel to the circuit. The meter will display the voltagnilai e.

• DC/AC Current Measurement (A, mA, µA):

  Set the rotary dial to the appropriate current range (A, mA, or µA). Connect the meter in series with the circuit. Ensure the circuit is de-energized before connecting the meter.

• Ukur Résistansi (Ω):

  Set the rotary dial to Ω or AUTO. Ensure the circuit is de-energized. Connect test leads across the component. The meter will display the resistance value.
• Pangukuran Kapasitansi (F):

  Set the rotary dial to F or AUTO. Ensure the capacitor is discharged before measurement. Connect test leads across the capacitor terminals.

• Ukur Frékuénsi (Hz):

  Set the rotary dial to Hz or AUTO. Connect test leads to the signal source. The meter will display the frequency.

• Uji dioda (→|):

  Set the rotary dial to the diode symbol. Connect the red lead to the anode and the black lead to the cathode. The meter displays the forward voltage teundeun.
• Uji Kontinuitas ()))):

  Set the rotary dial to the continuity symbol. Connect test leads across the circuit or component. A built-in buzzer will sound if the resistance is below a certain threshold (typically <50Ω).

• Ukur Suhu (°C/°F):

  Set the rotary dial to TEMP. Connect the temperature probe (thermocouple) to the input jacks. Place the probe on the object to be measured.

• Non-Kontak Voltage (NCV) Deteksi:

  Set the rotary dial to NCV. Bring the top of the meter near a live AC voltagsumber e. Méterna bakal nunjukkeun ayana voltase ACtage ngaliwatan sora bip jeung/atawa indikator visual.

Gambar 5.2: Kelamples of various measurements being performed with the ANENG V7 Multimeter, including intelligent identification, capacitance, battery, and temperature measurements.

5.3 Fungsi Husus

• Data Tahan (HOLD)Pencét tombol "HOLD" pikeun ngeureunkeun bacaan ayeuna dina tampilan. Pencét deui pikeun ngaleupaskeun.
• Lampu tukang / Senter: The meter features a backlight for the display and an integrated flashlight for illuminating the work area. Refer to Figure 3.4 for flashlight location.
• MAX/MIN: Press the "MAX/MIN" button to record the maximum and minimum values during a measurement session.
• REL (Relative Value Measurement): This function allows you to measure a value relative to a stored reference value.
• Otomatis Pareum: To conserve battery, the meter will automatically power off after a period of inactivity.

6. Pangropéa

6.1 beberesih

Ngusap kasus kalayan iklanamp lawon jeung detergent hampang. Ulah make abrasives atawa pangleyur. Tetep terminal input bébas tina kokotor jeung Uap.

6.2 Ngagantian batré

When the low battery indicator appears on the display, replace the batteries immediately to ensure accurate readings. Refer to Section 4.1 for battery installation instructions.

6.3 Ngagantian sekering

If the current measurement function stops working, the fuse may need replacement. Refer to the specifications for the correct fuse type and rating. Fuse replacement should only be performed by qualified personnel.

7. Cara ngungkulan

• No Display / Power On Issue:

  Check battery installation and ensure batteries are not depleted. Replace if necessary. Ensure the rotary dial is not in the "OFF" position.

• Bacaan Lepat:

  Verify the correct function and range are selected. Check test lead connections. Ensure batteries are not low. Calibrate if necessary (advanced users only).

• Current Measurement Not Working:

  Check if the fuse for the current input is blown. Replace if necessary (refer to Section 6.3).
• Continuity Buzzer Not Sounding:

  Ensure the circuit is de-energized. Check for open circuits or high resistance. The buzzer typically activates for resistance below 50Ω.

8. Spésifikasi

9. Garansi jeung Rojongan

For warranty information and technical support, please refer to the documentation provided with your purchase or contact the seller directly. The manufacturer, ANENG, typically provides support for their products. Keep your purchase receipt as proof of purchase for any warranty claims.