FUSION FM-S10SB Marine Subwoofer User Manual

Bubuka

Thank you for choosing the FUSION FM-S10SB Flush Mount Marine Subwoofer. This 10-inch, 400W subwoofer is engineered for marine environments, featuring a square grille, sealed water-resistant construction, and a polypropylene cone with a rubber surround. It is designed to deliver high-quality bass while withstanding harsh marine conditions, meeting IP65 water and dust resistance standards and complying with ASTM standards for UV stability and salt/fog resistance.

This manual provides essential information for the safe and effective installation, operation, and maintenance of your FUSION marine subwoofer. Please read it thoroughly before installation and keep it for future reference.

Émbaran Kasalametan

Always observe the following safety precautions to prevent injury or damage to the product and vessel:

• Pegatkeun daya: Disconnect the vessel's power supply before beginning any installation or wiring.
• Wiring anu leres: Ensure all wiring is correctly connected and insulated to prevent short circuits and electrical hazards. Refer to the wiring diagram in the installation section.
• Ventilasi: Pastikeun ventilasi nyukupan sabudeureun subwoofer pikeun nyegah overheating.
• Lokasi Pasang: Choose a stable and secure mounting location that can support the weight of the subwoofer and is free from obstructions.
• Paparan cai: While the subwoofer is water-resistant (IP65 rated), avoid direct high-pressure water jets or submersion.
• Pamasangan profésional: If you are unsure about any aspect of the installation, consult a qualified marine electronics installer.
• Tingkat volume: Paparan anu berkepanjangan ka tingkat volume anu luhur tiasa nyababkeun karusakan dédéngéan.

Proposisi 65 Peringatan: Produk ieu tiasa ngalaan anjeun ka bahan kimia anu dipikanyaho ku Nagara California nyababkeun kanker sareng cacad kalahiran atanapi cilaka réproduktif sanés. Kanggo inpo nu leuwih lengkep buka www.P65Warnings.ca.gov.

Naon dina Box

Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan:

• FUSION FM-S10SB Flush Mount Marine Subwoofer
• Installation Material (screws, mounting template if applicable)
• Lembar instruksi (manual ieu)

Setup sareng Instalasi

Pamasangan anu leres penting pisan pikeun pagelaran optimal sareng umur panjang subwoofer anjeun. Turutan léngkah-léngkah ieu sacara saksama:

1. Milih Lokasi Pemasangan

Select a flat, stable surface on your vessel that can accommodate the subwoofer's dimensions (9.84 x 5.51 x 5.04 inches) and provide sufficient clearance behind for wiring and air circulation. The subwoofer is designed for flush mounting.

2. Preparing the Mounting Surface

1. Using the provided mounting template (if included), mark the cutout area on the chosen surface.
2. Carefully cut the opening using appropriate tools. Ensure the cut is clean and precise to allow for a snug fit.
3. Drill pilot holes for the mounting screws as indicated by the template.

3. Wiring the Subwoofer

The FM-S10SB features a dual 2-ohm voice coil. Ensure your amplifier is compatible with this impedance. Proper wiring is essential for sound quality and to prevent damage to the subwoofer or amppangagung.

• Kabel Paralel (1 Ohm): Connect the positive terminals of both voice coils together, and the negative terminals of both voice coils together. Connect the combined positive to the ampkaluaran positip lifier sarta négatip digabungkeun kana amplifier's negative output. This configuration presents a 1-ohm load.
• Kabel séri (4 Ohm): Connect the positive terminal of one voice coil to the negative terminal of the other voice coil. Connect the remaining positive terminal to the ampkaluaran positif lifier sarta terminal négatip sésana ka amplifier's negative output. This configuration presents a 4-ohm load.

Use marine-grade wiring of appropriate gauge for your power requirements. Ensure all connections are secure and protected from moisture.

4. Pasang Subwoofer

1. Carefully insert the subwoofer into the prepared cutout.
2. Secure the subwoofer using the provided mounting screws. Do not overtighten, as this can damage the mounting flange.
3. Ensure the grille is properly aligned and seated.

Gambar: Hareupeun view of the FUSION FM-S10SB Marine Subwoofer, showcasing its black square grille and flush-mount design. The grille features a dense pattern of small circular perforations for sound output and protection.

Ngoperasikeun Subwoofer

The FUSION FM-S10SB subwoofer is a passive component and requires an external amplifier to operate. Once installed and wired correctly, its operation is controlled by your marine audio system's head unit and ampsetélan liifier.

• AmpSetélan Lifier: Adjust the gain, crossover frequency (low-pass filter), and phase settings on your amplifier to optimize the subwoofer's performance with your main speakers. A typical low-pass crossover setting for a subwoofer is between 60Hz and 100Hz.
• Kontrol volume: Control the overall system volume through your head unit. Avoid pushing the subwoofer to distortion, which can cause damage.
• Periode istirahat: Allow a short break-in period (approximately 10-20 hours of normal use) for the subwoofer's suspension to loosen, which can improve its long-term performance.

Pangropéa

To ensure the longevity and optimal performance of your FUSION marine subwoofer, follow these maintenance guidelines:

• beberesih: Regularly wipe down the grille and surrounding surfaces with a soft, damp cloth. For stubborn dirt, use a mild soap solution and rinse thoroughly with fresh water. Avoid abrasive cleaners or solvents.
• Pamariksaan: Periodically inspect the subwoofer for any signs of wear, corrosion, or damage to the cone, surround, or grille. Check wiring connections for tightness and corrosion.
• Perlindungan UV: While the grille is UV-resistant, prolonged exposure to direct sunlight can still affect its appearance over time. Consider using a cover when the vessel is not in use for extended periods.
• Winterization: If storing your vessel in freezing temperatures, ensure the subwoofer is protected from extreme cold and moisture.

Pamérésan masalah

If you experience issues with your FUSION FM-S10SB subwoofer, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, contact Fusion customer support or a qualified service technician.

spésifikasi

Garansi sareng Rojongan

Inpormasi Garansi: Your FUSION FM-S10SB Marine Subwoofer comes with a Full Warranty. Please refer to the warranty card included with your product or visit the official Fusion websitus kanggo syarat sareng katangtuan anu lengkep ngeunaan panutup garansi, durasi, sareng prosedur klaim.

Rojongan Palanggan: For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Fusion customer support. Contact information can typically be found on the Fusion websitus atanapi dina bungkusan produk.

Sumberdaya Online: Visit the official Fusion website for the latest product information, FAQs, and additional support resources.