1. Bubuka
Thank you for choosing the Erbauer ECDT18-Li-2 Brushless Cordless Hammer Drill. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before first use and keep it for future reference.
1.1 Inpormasi Kasalametan Umum
Always observe basic safety precautions when using power tools to reduce the risk of fire, electric shock, and personal injury. Wear appropriate personal protective equipment (PPE) such as safety glasses, hearing protection, and gloves. Ensure your work area is well-lit and clear of obstructions. Keep children and bystanders away while operating the tool.
1.2 Produk Leuwihview
The Erbauer ECDT18-Li-2 is a powerful 18V cordless hammer drill featuring a brushless motor for enhanced performance and durability. It offers 24 torque settings and a 3-in-1 function for drilling, percussion drilling, and screwing. The tool is designed for heavy-duty applications and is compatible with all Erbauer EXT 18V batteries and chargers (sold separately).
Gambar 1: Erbauer ECDT18-Li-2 Brushless Cordless Hammer Drill. This image displays the main body of the drill, including the chuck, motor housing, handle, and trigger. The auxiliary handle and battery are not shown as they are separate components.
2. Setélan
2.1 Pamasangan sareng Panyabutan Batré
This tool operates with an Erbauer EXT 18V battery (not included). Ensure the battery is fully charged before use.
- Pikeun Pasang: Align the battery with the receptacle at the base of the drill handle. Slide the battery into place until it clicks securely.
- Pikeun ngahapus: Pencét tombol pelepas batré (biasana aya dina pak batré) teras geser batréna kaluar tina alat.
2.2 Ngagantelkeun gagang bantu
The auxiliary handle provides additional control and safety, especially during high-torque applications or hammer drilling.
- Leupaskeun gagang bantu ku cara muterkeunana sabalikna jarum jam.
- Geserkeun gagangna kana luhureun chuck teras ka hareup awak bor.
- Adjust the handle to your desired position for optimal grip and control.
- Tighten the handle by rotating it clockwise until it is securely fastened.
2.3 Chuck Operation (Installing/Removing Drill Bits)
The drill features a 13mm self-tightening metal chuck for quick and secure bit changes.
- Pikeun Buka Chuck: Hold the rear part of the chuck firmly and rotate the front part counter-clockwise until the jaws are wide enough to accept the bit.
- Pikeun Masang Bit: Selapkeun bit bor atawa aksésori pinuh kana rahang cuk.
- To Close and Tighten the Chuck: Hold the rear part of the chuck firmly and rotate the front part clockwise until the bit is securely gripped. The self-tightening mechanism will ensure a firm hold.
- Pikeun miceun bit: Reverse the tightening process by rotating the front part of the chuck counter-clockwise.
3. Parentah Operasi
3.1 Pamilihan Mode
The Erbauer ECDT18-Li-2 offers three operating modes: Screwing, Drilling, and Hammer Drilling. Select the appropriate mode using the mode selector ring located behind the chuck.
- Modeu Ngaput (Ikon Screw): For driving and removing screws. Use with appropriate torque settings.
- Modeu Pangeboran (Drill Bit Icon): Pikeun pangeboran kana kai, logam, jeung plastik.
- Modeu Pangeboran Palu (Ikon palu): For drilling into masonry and concrete. Use with masonry drill bits.
3.2 Setélan torsi
The drill features 24 torque settings, allowing you to adjust the amount of rotational force applied. This prevents over-tightening screws and damaging materials. Rotate the torque adjustment ring (located behind the mode selector) to select the desired setting. Higher numbers indicate greater torque.
- Use lower torque settings for smaller screws or softer materials.
- Use higher torque settings for larger screws or harder materials.
- For drilling, set the ring to the drill icon (usually the highest setting) to bypass the clutch and deliver maximum power.
3.3 Variable Speed Trigger and Direction Control
- Variabel Speed pemicu: The trigger controls the speed of the drill. Pressing the trigger further increases the speed.
- Pamilih Maju/Mundur: A switch located above the trigger allows you to select forward (clockwise) or reverse (counter-clockwise) rotation. Ensure the switch is in the central position to lock the trigger and prevent accidental starting.
3.4 LED Gawé Lampu
Lampu LED terpadu nyaangan wewengkon gawé nalika pemicu dipencet, ngaronjatkeun pisibilitas dina kondisi remang-remang.
3.5 Sabuk Klip
The convenient belt clip allows for easy transport and temporary storage of the tool when not in active use. Attach it to your belt or waistband for quick access.
4. Pangropéa
Pangropéa rutin ngajamin umur panjang sareng kinerja optimal alat anjeun.
4.1 beberesih
- Sok pegatkeun sambungan batré saméméh beberesih.
- Ngusap bagian luar alat kalayan bersih, damp lawon. Ulah nganggo bahan kimia, pangleyur, atanapi pembersih anu kasar.
- Tetep bukaan ventilasi bersih tina lebu jeung lebu pikeun nyegah overheating. Anggo hawa anu dikomprés upami diperyogikeun.
- Ngabersihan rahang cuk sacara teratur pikeun mastikeun cengkraman anu pas dina bit.
4.2 Panyimpenan
- Simpen alat sareng batréna di tempat anu tiis sareng garing, jauh tina sinar panonpoé langsung sareng kalembaban.
- Jauhkeun tina jangkauan barudak sareng jalma anu teu sah.
- Remove the battery from the tool before storing for extended periods.
5. Cara ngungkulan
If you encounter issues with your Erbauer ECDT18-Li-2 drill, refer to the following common problems and solutions:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Bor teu ngamimitian | Battery not installed correctly or discharged; Forward/Reverse selector in neutral position. | Ensure battery is fully charged and properly inserted. Move selector to forward or reverse position. |
| Leungitna kakuatan nalika operasi | Battery charge low; Overload. | Recharge battery. Reduce pressure on the tool or use a lower torque setting. |
| Chuck teu nyekel bit aman | Chuck jaws dirty or worn; Bit not inserted fully. | Clean chuck jaws. Ensure bit is inserted completely and chuck is tightened firmly. |
| Geter atawa noise kaleuleuwihan | Damaged bit; Loose components. | Replace damaged bit. Check for any loose parts and tighten if possible. If problem persists, discontinue use and contact support. |
If the problem persists after attempting these solutions, please contact Erbauer customer support or an authorized service center.
6. Spésifikasi
| merek | ERBAUER |
| Modél | ECDT18-Li-2 |
| Voltage | 18 V |
| Tipe Motor | Brushless |
| Max torsi | 120 Nm (Hard Torque) |
| Setélan torsi | 24 |
| Ukuran Amrik | 13 mm Self-tightening Metal Chuck |
| Fungsi | Drilling, Percussion Drilling, Screwing (3-in-1) |
| Sumber Daya | Battery Powered (Erbauer EXT 18V, sold separately) |
| Bahan | Metal (Gear Housing) |
| Komponén Kaasup | Gagang bantu |
7. Garansi jeung Rojongan
This Erbauer product is backed by the original manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official Erbauer websitus pikeun istilah jeung kaayaan jaminan lengkep.
For technical assistance, spare parts, or warranty claims, please contact your retailer or Erbauer customer support. Ensure you have your proof of purchase and the product model number (ECDT18-Li-2) available when contacting support.
