LTS CMIP3342W-28MA 4MP IP Turret Dome Camera User Manual

1. Bubuka

This manual provides detailed instructions for the installation, operation, and maintenance of your LTS CMIP3342W-28MA 4MP IP Turret Dome Camera. Please read this manual thoroughly before using the product to ensure correct usage and to prevent damage or injury. Keep this manual for future reference.

2. Émbaran Kasalametan

• Ensure the power supply meets the camera's requirements. Incorrect voltage bisa ngabalukarkeun karuksakan.
• Ulah ngalaan kaméra kana suhu anu ekstrim, kalembaban, atanapi lingkungan korosif.
• Avoid pointing the camera lens directly at strong light sources for extended periods, as this may damage the image sensor.
• Ati-ati nalika ngagésér kaméra. Ulah nepi ka muragkeun atawa kakeunaan geteran anu kuat.
• All installation and service should be performed by qualified personnel.

3. Eusi Paket

Verify that all items listed below are included in your package. If any items are missing or damaged, contact your supplier immediately.

• LTS CMIP3342W-28MA IP Turret Dome Camera
• Pemasangan Screws sareng Colokan Tembok
• Témplat Bor
• Hex rengkuh
• Pakakas Konektor Tahan Cai
• Pituduh Mimiti Gancang (dokumén ieu)

Gambar 3.1: The LTS CMIP3342W-28MA IP Turret Dome Camera shown with its included accessories, including mounting hardware and a drill template for installation.

4. Produk Langkungview

The LTS CMIP3342W-28MA is a 4MP IP Turret Dome Camera designed for reliable surveillance. It features a 2.8mm fixed lens, built-in microphone, Wide Dynamic Range (WDR), and 100ft (30m) IR night vision.

Gambar 4.1: Hareupeun view of the LTS CMIP3342W-28MA camera, highlighting the lens and IR illuminators.

Gambar 4.2: Samping view of the camera, illustrating the turret design which allows for flexible angle adjustment after mounting.

5. Setup jeung Instalasi

5.1 Lokasi Pamasangan

Milih lokasi ningkatna cocog nu nyadiakeun widang dipikahoyong tina view and is within range of your network infrastructure. Ensure the surface is strong enough to support the camera's weight.

5.2 Léngkah-léngkah Pamasangan

1. Affix the provided drill template to the desired mounting surface.
2. Drill holes according to the template for mounting screws and cable routing.
3. Insert wall plugs into the drilled holes if mounting on masonry.
4. Route the network cable through the designated hole.
5. Pasangkeun dasar kaméra kana permukaan pemasangan nganggo sekrup anu disayogikeun.
6. Atur sudut kaméra sakumaha diperyogikeun.

5.3 Kabel sareng Konéktivitas

This camera utilizes Power over Ethernet (PoE) for both power and data transmission. Connect a standard Ethernet cable from your PoE-enabled switch or NVR to the camera's network port. The camera is not compatible with DC power or BNC video connections.

Gambar 5.1: Illustration of compatible network cable (PoE) for the camera, contrasting with incompatible DC power and BNC video connections.

6. Parentah Operasi

6.1 Konfigurasi Awal

Upon first power-up, the camera will obtain an IP address via DHCP if available. You can use a manufacturer-provided IP search tool to discover the camera's IP address on your network. Access the camera's web panganteur ku cara nuliskeun alamat IP na kana a web browser.

6.2 Web Aksés Interface

Enter the default username and password (refer to your Quick Start Guide or manufacturer's documentation for default credentials). It is highly recommended to change the default password immediately for security purposes.

6.3 Fitur konci

• Résolusi 4MP: Provides high-definition video for clear image capture.
• Lensa Maneuh 2.8mm: Nawarkeun widang lega tina view, suitable for general surveillance.
• Mikropon internal: Enables audio recording alongside video.
• WDR (Lebar Dinamis Range): Ningkatkeun kualitas gambar dina pamandangan anu gaduh daérah anu caang pisan sareng poék pisan.
• IR Peuting Visi: Infrared illuminators provide clear video up to 100ft (30m) in low-light or no-light conditions.
• Deteksi gerak: Configure motion detection zones and sensitivity for event-triggered recording or alerts.

7. Pangropéa

7.1 beberesih

Regularly clean the camera lens and housing with a soft, dry cloth. For stubborn dirt, use a mild detergent solution applied to the cloth, then wipe dry. Do not use harsh chemicals or abrasive cleaners.

7.2 Apdet firmware

périodik pariksa produsén urang website for firmware updates. Firmware updates can improve performance, add new features, and enhance security. Follow the provided instructions carefully when performing updates.

8. Cara ngungkulan

• Henteu aya kakuatan: Ensure the Ethernet cable is securely connected and your PoE source is active and functioning correctly.
• Taya Video: Verify network connectivity. Check the camera's IP address and ensure it's accessible on the network. Confirm that the NVR or viewing software is configured correctly.
• Kualitas Gambar goréng: Clean the lens. Check for obstructions. Adjust camera settings such as exposure, brightness, and WDR in the web panganteur.
• Visi Peuting Teu Gawé: Ensure IR illuminators are not obstructed. Check night vision settings in the camera's web panganteur.
• Teu Bisa Aksés Web panganteur: Verify the camera's IP address. Ensure your computer is on the same network segment. Try pinging the camera's IP address.

9. Spésifikasi

10. Garansi jeung Rojongan

For warranty information and technical support, please refer to the official LTS websitus atanapi ngahubungan dealer otorisasi Anjeun. Simpen resi pameseran anjeun salaku bukti pameseran pikeun klaim garansi.