Canarm KORBER IOL458BK Outdoor Light Instruksi Manual

1. Bubuka

Welcome to your new Canarm KORBER IOL458BK Outdoor Down Light. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new fixture. Please read all instructions carefully before beginning installation and retain this manual for future reference.

2. Émbaran Kasalametan penting

WARNING: RISK OF ELECTRIC SHOCK. Disconnect power at the circuit breaker or fuse box before installation or servicing.

• All electrical connections must be in accordance with local codes and the National Electric Code (NEC). If you are unfamiliar with proper electrical wiring connections, consult a qualified electrician.
• This fixture is intended for outdoor use. Ensure the installation location is suitable for wet conditions.
• Anggo ngan ukur jinis bohlam sareng wattage specified in the specifications section. Exceeding the maximum wattage may cause overheating.
• Do not install this fixture on surfaces that are easily flammable.
• Anggo kacamata kaamanan sareng alat pelindung anu pantes nalika pamasangan.
• Pastikeun fixture bener grounded.

3. Eusi Paket

Carefully unpack your fixture and inspect for any damage. Ensure all components listed below are present before discarding packaging materials.

• Light Fixture Body (1)
• Clear Glass Shade (1)
• Piring Pamasangan (1)
• Sekrup Pamasangan (2)
• Panyambung Kawat (3)
• Gasket (1)

Gambar 3.1: Hareupeun view of the Canarm KORBER IOL458BK Outdoor Light, showing the matte black finish and clear glass shade.

4. Parentah instalasi

4.1 Pakakas Diperlukeun

• Phillips Kepala Obeng
• Kawat Strippers
• Tang
• Pita listrik (opsional)
• Kacamata Kasalametan

4.2 Lengkah-demi-Lengkah Instalasi

1. Pareuman Daya: Sateuacan ngamimitian, pastikeun daya ka kotak sambungan dipareuman dina pemutus sirkuit atanapi kotak sekering.
2. Nyiapkeun Permukaan Pemasangan: Remove the old fixture (if applicable). Ensure the mounting surface is clean, dry, and structurally sound.
3. Ngagantelkeun Plate Pemasangan: Secure the mounting plate to the junction box using the provided mounting screws. Ensure the plate is flush against the wall.
4. Jieun sambungan listrik:
   • Nyambungkeun hideung kawat ti fixture kana hideung kawat (panas) tina kotak sambungan.
   • Nyambungkeun bodas kawat ti fixture kana bodas kawat (nétral) tina kotak sambungan.
   • Nyambungkeun taneuh kawat ti fixture kana taneuh wire from the junction box (or to the green ground screw on the mounting plate).
   Use the provided wire connectors and secure each connection with electrical tape if desired.
5. Perlengkapan Aman: Carefully tuck all wires into the junction box. Align the fixture body with the mounting plate and secure it using the fixture screws. Ensure the gasket is properly seated between the fixture and the mounting surface for a watertight seal.
6. Pasang Bulb: Insert one 60W Type A maximum bulb (not included) into the socket. Do not exceed the recommended wattage.
7. Pasang Kaca Shade: Carefully place the clear glass shade over the bulb and secure it according to the fixture design (e.g., by tightening retaining screws or a threaded ring).
8. Mulangkeun Daya: Once installation is complete, restore power at the circuit breaker or fuse box and test the light fixture.

Gambar 4.1: View of the mounting plate and wiring connections for the Canarm KORBER IOL458BK. Note the wire connectors and ground wire attachment.

Gambar 4.2: Sisi view of the assembled Canarm KORBER IOL458BK Outdoor Light, illustrating its profile and how the glass shade is attached.

5. Parentah Operasi

The Canarm KORBER IOL458BK Outdoor Down Light operates with a standard wall switch (not included). Simply toggle the wall switch to turn the light fixture on or off.

5.1 Bohlam ngagantian

Pikeun ngaganti bohlam:

1. Pareuman daya ka stop kontak di pemutus sirkuit.
2. Ngidinan bohlam pikeun niiskeun lengkep upami nembe dianggo.
3. Cabut panutup kaca kalawan ati-ati.
4. Unscrew the old bulb and screw in a new 60W Type A maximum bulb.
5. Pasangkeun deui kap kacana.
6. Mulangkeun kakuatan sareng uji bohlam énggal.

6. Pangropéa

Regular maintenance will help preserve the appearance and functionality of your outdoor light fixture.

• beberesih: Rapihkan alat dengan lembut, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or glass. Ensure the power is off before cleaning.
• Pamariksaan: Periodically inspect the fixture for any signs of wear, damage, or loose connections. Check the gasket for integrity to maintain weather resistance.
• Ngagantian bohlam: Replace bulbs as needed, following the instructions in Section 5.1.

7. Cara ngungkulan

If you encounter issues with your light fixture, refer to the table below for common problems and solutions.

8. Spésifikasi produk

9. Garansi jeung Rojongan

For warranty information or technical assistance regarding your Canarm KORBER IOL458BK Outdoor Light, please contact Canarm customer service. Refer to the original purchase documentation for specific warranty terms and conditions.

You can also visit the official Canarm Store for more information and products: Canarm Official Store