YORK Air Conditioner Evaporator Control Board User Manual

1. Bubuka

This manual provides essential information regarding the installation, operation, and maintenance of the YORK Air Conditioner Evaporator Control Board. This electronic board is a critical component for the proper functioning of your split air conditioning unit.

penting: Before proceeding with installation or any maintenance, ensure the air conditioning unit is disconnected from the main power supply. Installation should ideally be performed by a qualified technician.

2. Kasaluyuan produk

This electronic control board is compatible with the following YORK split air conditioner evaporator models:

• YJEA09FS-ADK (9000 BTUs)
• YJEA12FS-ADK (12000 BTUs)
• DJEA09FS-ADK (9000 BTUs)
• DJEA12FS-ADK (12000 BTUs)
• YJEA09FSADK
• YJEA12FSADK
• DJEA09FSADK
• DJEA12FSADK

Please verify your unit's model number, typically found on a label on the side of the indoor unit, to ensure compatibility before purchase and installation.

3. Produk Langkungview

The YORK Evaporator Control Board (Part Number: PL343) is the main electronic control unit for the indoor evaporator section of your air conditioner. It manages various functions including fan speed, temperature sensing, and communication with the outdoor unit.

Gambar 3.1: Main electronic control board for YORK air conditioner evaporator units. This image displays the full circuit board with various components such as relays, capacitors, resistors, and integrated circuits. Key connectors and labels are visible, indicating power inputs, fan connections, and sensor inputs.

4. Setup jeung Instalasi

Bantahan: Installation of this electronic component requires technical knowledge and should only be performed by certified HVAC technicians to ensure safety and proper functionality. Incorrect installation can lead to damage to the unit or personal injury.

1. Pegatkeun daya: Before beginning, ensure the air conditioning unit's main power supply is completely disconnected at the circuit breaker. Verify with a voltage panguji.
2. Accessing the Board: Carefully open the indoor evaporator unit's casing to access the existing control board. Refer to your air conditioner's specific service manual for detailed instructions on accessing internal components.
3. Idéntifikasi komponén: Take clear photos of all existing wiring connections to the old board before disconnecting them. Label wires if necessary.
4. Removal of Old Board: Disconnect all wires and mounting screws securing the old control board. Carefully remove the old board.
5. Pamasangan Papan Anyar: Position the new YORK control board in the same location as the old one. Secure it with the appropriate screws.
6. Sambungan Wiring: Reconnect all wires to the new board according to the photos taken earlier and the wiring diagram (if available). Ensure all connections are secure and correctly seated. Pay close attention to polarity where applicable.
7. Reassembly: Carefully reassemble the indoor unit's casing, ensuring no wires are pinched.
8. Pamulihan sareng Pangujian Daya: Restore power to the unit. Perform a functional test to ensure the air conditioner operates correctly, including fan speeds, temperature control, and mode changes.

5. Parentah Operasi

This electronic control board is an internal component and does not have direct user operating controls. Its function is to process signals from the remote control or thermostat and manage the internal operations of the evaporator unit. For operating instructions of your air conditioner, please refer to the user manual provided with your specific YORK air conditioning unit.

6. Pangropéa

The electronic control board itself requires minimal maintenance. However, to ensure its longevity and proper function, consider the following:

• Kabersihan: Ensure the area around the board inside the evaporator unit remains clean and free of dust and debris. Dust accumulation can lead to overheating or short circuits.
• Kontrol Uap: Prevent any moisture or condensation from coming into contact with the electronic board. Ensure proper drainage of the evaporator coil.
• Catu daya stabil: Protect your air conditioning unit from power surges and fluctuations, which can damage electronic components. Consider using a surge protector.
• Pamariksaan profésional: During routine air conditioner maintenance, have a technician inspect the board for any signs of wear, corrosion, or loose connections.

7. Cara ngungkulan

If your air conditioner is experiencing issues after replacing the control board, consider the following general troubleshooting steps. For complex issues, consult a qualified technician.

If troubleshooting steps do not resolve the issue, it is recommended to contact a certified HVAC technician for further diagnosis and repair.

8. Spésifikasi

• Pabrikan: YORK
• Nomer Bagian: PL343
• Ukuran produk: 20 x 20 x 8 cm (7.87 x 7.87 x 3.15 inci)
• Beurat barang: 300 gram (0.66 pon)
• Kasaluyuan: YORK Split Air Conditioner Evaporator Units (9000 and 12000 BTUs)
• ASIN: B0853DD4R8
• EAN: 6012527532500

9. Garansi jeung Rojongan

Produk ieu hadir kalawan a garansi 90 poé from the date of purchase. The warranty covers manufacturing defects. It does not cover damage due to improper installation, misuse, or external factors such as power surges.

For technical support or warranty claims, please contact your original point of purchase or a certified YORK service center.