Bubuka
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Einhell TE-CS 18/165-1 Li-Solo Cordless Circular Saw. Please read these instructions carefully before using the tool to ensure safe and optimal performance. This tool is designed for cutting wood and similar materials.
Parentah Kasalametan
Peringatan Kasalametan Alat Daya Umum:
- Kasalametan Area Gawé: Keep the work area clean and well lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Kasalametan listrik: Hindarkeun kontak awak sareng permukaan bumi atanapi grounded sapertos pipa, radiator, rentang, sareng kulkas. Aya ngaronjat résiko shock listrik lamun awak anjeun earthed atawa grounded.
- Kasalametan Pribadi: Always wear appropriate personal protective equipment (PPE) including eye protection, hearing protection, and a dust mask. Stay alert, watch what you are doing, and use common sense when operating a power tool.
- Pamakéan sareng Perawatan Alat Daya: Ensure the switch is in the off-position before connecting to the battery pack, picking up, or carrying the tool. Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Use the correct power tool for your application. Do not force the power tool.
- Pangropéa: Ngajaga parabot kakuatan jeung asesoris. Pariksa keur misalignment atawa beungkeutan bagian pindah, megatkeun bagian, sarta sagala kaayaan sejenna nu bisa mangaruhan operasi alat kakuatan urang.
Specific Circular Saw Safety Warnings:
- Jauhkeun leungeun tina tempat motong sareng sabeulah. Ulah ngahontal handapeun workpiece nu.
- Saluyukeun jero motong to the thickness of the workpiece.
- Never hold the workpiece in your hands or across your leg while cutting. Secure the workpiece to a stable platform.
- Check the lower guard for proper closing before each use. Do not operate the saw if the lower guard does not move freely and close instantly.
- Always use blades of the correct size and shape for the arbor hole.
- Ulah nganggo washers agul atawa bolts ruksak atawa salah.
Produk Leuwihview
Familiarize yourself with the components of your Einhell TE-CS 18/165-1 Li-Solo Cordless Circular Saw before operation.
Image: The Einhell TE-CS 18/165-1 Li-Solo Cordless Circular Saw, showcasing its red and grey housing, ergonomic handle, blade guard, and robust base plate. The saw blade is clearly visible, highlighting the tool's design for portability and ease of use.
Komponén konci:
- Gagang utama: Ergonomic grip for primary control and operation.
- Gagang bantu: Provides additional stability and control during cutting.
- Saklar on/off: Aktipkeun sareng mareuman motor.
- Konci Spindle: Button used to lock the spindle for safe and easy saw blade changes.
- Penjaga Blade: Retractable guard that protects the user from the rotating blade.
- Base Plate (Saw Table): The flat surface that rests on the workpiece, guiding the saw during cuts.
- Tuas Pangaluyuan Jero: Mechanism for setting the desired cutting depth.
- Tuas Pangatur Bevel: Mechanism for setting the desired cutting angle for bevel cuts.
- Saw Blade: The cutting accessory, typically a 165mm diameter blade with a 20mm arbor hole.
- Adaptor ékstraksi lebu: Port for connecting a dust collection system to minimize sawdust.
- Battery Pack Receptacle: Slot for inserting the Einhell Power X-Change 18V battery pack (battery not included).
Disetél
1. Pamasangan batré
Pastikeun alatna dipareuman sateuacan masang atanapi nyabut batréna.
- Align the battery pack with the receptacle on the tool.
- Selapkeun pak batré kana wadahna dugi ka ngaklik pageuh kana tempatna.
- Pikeun ngahapus, pencét tombol leupaskeun dina pak batré sareng geser kaluar.
2. Pamasangan Mata Gergaji
Always disconnect the battery pack before changing the saw blade to prevent accidental startup.
- Pencét jeung tahan tombol konci spindle pikeun nyegah agul ti puteran.
- Use the provided wrench to loosen the blade retaining screw by turning it clockwise (this is a left-hand thread).
- Leupaskeun flange luar jeung sabeulah ragaji heubeul.
- Clean the inner flange and the blade mounting area thoroughly.
- Place the new saw blade onto the inner flange, ensuring the rotation direction arrow on the blade matches the arrow on the saw's housing.
- Replace the outer flange and tighten the blade retaining screw counter-clockwise (left-hand thread) firmly with the wrench while holding the spindle lock.
3. Nyaluyukeun jero motong
The cutting depth should be set so that the blade teeth protrude slightly below the workpiece, typically by about 2-3 mm, for efficient cutting and reduced kickback.
- Leupaskeun tuas adjustment jero.
- Move the base plate up or down to achieve the desired cutting depth, using the depth scale as a guide.
- Tighten the depth adjustment lever securely to lock the setting.
4. Nyaluyukeun Bevel Angle
The saw can make bevel cuts up to 45 degrees for angled cuts.
- Leupaskeun tuas adjustment bevel.
- Tilt the saw to the desired angle, indicated on the bevel scale.
- Tighten the bevel adjustment lever securely to lock the angle.
Parentah Operasi
1. Ngamimitian sareng Ngeureunkeun
- To start the saw, first press the safety lock-off button (if present), then squeeze the trigger switch.
- To stop the saw, simply release the trigger switch. The blade will come to a stop.
2. Nyieun Cut
- Amankeun workpiece pageuh kalayan clamps to prevent movement during cutting.
- Position the saw on the workpiece with the front of the base plate resting on the material. Ensure the blade is not touching the workpiece before starting the saw.
- Start the saw and allow the blade to reach full speed before engaging the material.
- Slowly guide the saw through the workpiece, maintaining a steady, even pressure. Do not force the saw, as this can lead to kickback or damage to the tool/blade.
- After completing the cut, release the trigger switch and allow the blade to stop completely before lifting the saw from the workpiece.
3. Pangeluaran Lebu
For a cleaner work environment and improved visibility, connect a suitable dust extraction system (e.g., a shop vacuum) to the dust extraction adapter on the saw.
Pangropéa
beberesih
Regularly clean the ventilation slots and the saw blade area to prevent dust buildup, which can affect performance and motor life. Use a soft brush or compressed air. Do not use water or solvents, as these can damage the tool's electrical components or plastic parts.
Perawatan sabeulah
Inspect the saw blade regularly for sharpness, cracks, or missing teeth. A dull or damaged blade can cause binding, kickback, and poor cut quality. Replace dull or damaged blades immediately with a suitable replacement blade (165mm diameter, 20mm arbor hole).
Panyimpenan
Store the saw in a dry, secure place, out of reach of children. Always remove the battery pack before storing the tool for extended periods.
Pamérésan masalah
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Saw teu ngamimitian | Battery not charged or improperly installed; safety lock-off not engaged. | Charge battery, ensure proper installation, press safety lock-off before trigger. |
| Gergaji motong lalaunan atanapi ngabeungkeut | Dull or incorrect blade; incorrect cutting depth; forcing the saw; workpiece not secured. | Replace blade, adjust depth, reduce feed pressure, secure workpiece firmly. |
| Geter kaleuleuwihi | Damaged or unbalanced blade; loose components; worn bearings. | Inspect/replace blade, check for loose screws and tighten, contact service if bearings are suspected. |
| Poor cut quality (rough edges, splintering) | Dull blade; incorrect blade type for material; too fast feed rate. | Replace blade, use appropriate blade for material, reduce feed rate. |
spésifikasi
- model: Einhell TE-CS 18/165-1 Li-Solo
- Voltage: 18 V (Battery Operated)
- Laju tanpa beban: 4,200 rpm
- Diaméterna Saw Blade: 165 mm
- Arbor Hole Diameter: 20 mm
- Jero Motong Maks. (90°): Kira-kira 54 mm
- Jero Motong Maks. (45°): Kira-kira 35 mm
- Beurat barang: 2.72 kg (tanpa batré)
- Bahan sabeulah: High Speed Steel
- Jumlah Gigi: 24
- Fitur husus: Operasi nirkabel
- Komponén Kaasup: Saw Blade
- Catetan: Battery and charger are not included and must be purchased separately as part of the Einhell Power X-Change system.
Garansi sareng Rojongan
This Einhell product comes with a limited warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Einhell website. For technical support, service, or to inquire about replacement parts, please contact Einhell customer service through their official channels.
