Shure SBC203-US Dual Docking Station Instruction Manual

1. Bubuka

The Shure SBC203-US Dual Docking Station is designed for charging Shure SB903 Lithium-Ion batteries, either independently or while installed in SLX-D handheld or bodypack transmitters. This station provides a convenient and efficient solution for managing rechargeable power for your Shure SLX-D Digital Wireless systems.

2. Produk Langkungview

The SBC203-US Dual Docking Station offers reliable charging for your Shure SLX-D wireless components. It features two charging bays that can accommodate any combination of SB903 Lithium-Ion batteries, SLX-D handheld transmitters, or SLX-D bodypack transmitters.

Fitur konci:

• Charges SB903 Lithium-Ion Batteries for up to 8 hours of use in SLX-D transmitters.
• Supports in-transmitter docking and charging.
• Manages charging for any pair of SLX-D handheld transmitters, SLX-D bodypack transmitters, or SB903 batteries.
• Achieves 50% charge with 1 hour 15 minutes of charging.
• Reaches full charge in 2.5 hours.
• Includes an external power supply.

Komponén produk:

This image shows the Shure SBC203-US Dual Docking Station, a compact black unit with two top-loading bays. Each bay contains a white Shure SB903 Lithium-Ion battery, indicating the station's capability to charge individual batteries.

Here, the Shure SBC203-US Dual Docking Station is shown charging two black SLX-D bodypack transmitters. The transmitters are docked vertically, with their antennas extending upwards, demonstrating the station's ability to charge transmitters directly.

This image illustrates the versatility of the Shure SBC203-US Dual Docking Station, showing one bay occupied by a black SLX-D handheld microphone and the other by a black SLX-D bodypack transmitter, both actively charging.

The Shure SBC203-US Dual Docking Station is depicted here with two black SLX-D handheld microphones, each with a silver grille, placed in its charging bays. This setup highlights the station's capacity to charge two handheld transmitters simultaneously.

3. Setélan

3.1 Nyambungkeun catu daya

1. Connect the external power supply to the DC input port on the rear of the SBC203-US docking station.
2. Plug the power supply into an AC power outlet.
3. The charging indicator LEDs on the front of the unit will illuminate briefly, indicating power is supplied.

3.2 Installing Batteries in Transmitters

For SLX-D handheld and bodypack transmitters, ensure the SB903 Lithium-Ion batteries are correctly installed before placing them in the docking station. Refer to your transmitter's manual for specific battery installation instructions.

Catetan: The SBC203-US is designed for Shure SB903 Lithium-Ion batteries. Using non-Shure rechargeable batteries may not be compatible or may cause issues.

3.3 Initial Frequency Setup (for SLX-D Receivers)

Before using your SLX-D system, it is crucial to set up the frequencies. This process ensures optimal performance and avoids interference.

1. Turn on the SLX-D receiver. Ensure all transmitters are OFF.
2. On the receiver, use the control knob to navigate to Frequency Setup > Guided Frequency Setup > Initialize My System.
3. Follow the on-screen prompts to scan for available frequencies.
4. Once the scan is complete, the receiver will assign a clear frequency.

3.4 Adding Additional Receivers

If you are expanding your SLX-D system with additional receivers, they can be easily integrated.

1. Connect the new receiver to the existing system using an Ethernet cable (if applicable for network control).
2. Turn on the new receiver. Ensure all transmitters are OFF.
3. On the primary receiver, navigate to Frequency Setup > Guided Frequency Setup > Add Receiver to My System.
4. Follow the on-screen prompts to integrate the new receiver into the system's frequency group.

4. Operasi

4.1 Charging Transmitters and Batteries

1. Ensure the SBC203-US docking station is powered on.
2. Insert an SB903 Lithium-Ion battery directly into a charging bay, or place an SLX-D handheld or bodypack transmitter with an installed SB903 battery into a bay.
3. The charging indicator LED for that bay will blink red while charging.
4. The LED will turn solid green when the battery or transmitter is fully charged.
5. Charging automatically stops when full. It is recommended to remove fully charged batteries/transmitters from the dock to prevent slow discharge over time.

4.2 Syncing Transmitters with Receivers

After initial setup or if a transmitter needs to be re-synced:

1. Turn on the transmitter you wish to sync.
2. On the receiver, press the Singkronkeun kancing.
3. Align the IR ports of the transmitter and receiver (usually indicated by an IR window on both devices).
4. Hold them together until the receiver confirms successful synchronization.

4.3 Locking and Unlocking Controls

To prevent accidental changes during operation, you can lock the controls on both the receiver and transmitters.

• Receiver Lock: Arahkeun ka Advanced Settings > Device Lock on the receiver. You can choose to lock the menu only or both the menu and power button.
• Transmitter Lock: On the transmitter, press ménu pikeun napigasi ka Otomatis Konci layar. Pencét Lebetkeun, tuluy ménu to toggle the setting to On. Pencét Lebetkeun pikeun nyimpen.
• Muka konci: Follow the same steps and select Muka konci for the receiver or toggle Otomatis Konci ka Pareum for the transmitter.

4.4 Performing a Soundcheck

After setting up and syncing, perform a soundcheck to ensure optimal audio levels.

1. On the receiver, navigate to Keuntungan.
2. Speak or sing into the synced microphone at typical performance levels.
3. Adjust the gain up or down using the control knob to keep the audio meter in the optimal range (usually indicated by green segments).

5. Pangropéa

5.1 beberesih

• Wipe the docking station and transmitters with a soft, dry cloth.
• Ulah make cleaners abrasive atawa pangleyur.
• Jaga kontak pangisi daya tetep bersih sareng bébas tina kokotor.

5.2 Perawatan Batré

• While the SBC203-US automatically stops charging when batteries are full, it is recommended to remove fully charged batteries or transmitters from the dock if they will not be used immediately. This helps prevent a slow discharge over extended periods.
• Store SB903 batteries in a cool, dry place when not in use.

6. Cara ngungkulan

6.1 Masalah Ngecas

• Henteu aya kakuatan: Ensure the power supply is securely connected to the docking station and a working AC outlet. Check the power supply cable for damage.
• Batré Teu Ngecas: Verify that the SB903 battery or transmitter is correctly seated in the charging bay. Ensure the charging contacts on both the dock and the battery/transmitter are clean.
• Non-Shure Batteries: The SBC203-US is designed specifically for Shure SB903 Lithium-Ion batteries. Other battery types may not charge or function correctly with this unit.

6.2 Interference or Signal Loss

• Perform a new frequency scan on your SLX-D receiver to find a clear channel.
• Ensure transmitters are not too far from the receiver and there are no major obstructions.
• Check that all synced transmitters are turned OFF when performing a new frequency scan on the receiver to avoid interference during the scan process.

For further assistance, please refer to the complete Shure SLX-D Digital Wireless System user guide or contact Shure technical support.

7. Spésifikasi

8. Garansi jeung Rojongan

Shure products are engineered for performance and durability. For detailed warranty information specific to your region and product, please visit the official Shure website or contact your local Shure authorized dealer.

For technical support, troubleshooting assistance, or service inquiries, please contact Shure Customer Service. Have your product model number (SBC203-US) and serial number ready for faster service.