1. Bubuka
This manual provides essential information for the safe and efficient installation, operation, and maintenance of the BENINCA Gate Opener VN M.20. This system is designed for automating warehouse or heavy garage doors, specifically those installed directly on the shaft (1-inch diameter) without a rail or trolley system. Please read this manual thoroughly before attempting any installation or operation.
2. Parentah Kasalametan penting
WARNING: Failure to follow these safety instructions may result in serious injury or death, and/or damage to property.
- Installation and wiring must be performed by qualified personnel in accordance with all local electrical codes and regulations.
- Disconnect power to the gate opener before performing any service or maintenance.
- Keep hands and loose clothing away from moving parts of the gate opener and the gate itself.
- Ulah ngawenangkeun barudak pikeun maénkeun kalayan atawa beroperasi kadali opener gerbang.
- Ensure the gate area is clear of obstructions before operating the gate.
- Regularly inspect the gate opener and gate for signs of wear, damage, or imbalance.
- Only use genuine BENINCA replacement parts.
3. Produk Langkungview
3.1. komponén
The BENINCA VN M.20 system includes the following main components:
- Unit motor: The primary drive mechanism for opening and closing the door.
- Dasar: Provides stable mounting for the motor unit.
- Panél kontrol: Houses the electronic circuitry, receiver, and control buttons.
- panarima: Integrated within the control panel for wireless remote control operation.
- Chain Drive System: For manual override or specific door types.
3.2. Fitur
- Designed for WAREHOUSE or HEAVY GARAGE DOORS installed directly on a 1-inch shaft.
- Suitable for SECTIONAL DOOR or ROLL-UP automation.
- Compact size and silent operation.
- Powerful torque for heavy-duty applications.
- Attractive and robust design.
- Easy installation (wall/ceiling/plate mounting options).
- Adjustable limits for precise open and close positions.
- Voltage: 230 ka.
- Material: Steel / Stainless Steel.
- Dijieun di Italia.
3.3. Visuals produk
Gambar 1: Leuwihview of the BENINCA Gate Opener VN M.20 system, showing the motor unit with its chain drive mechanism and the separate control panel with green operational buttons.
Gambar 2: Pahareup-hareup view of the BENINCA Gate Opener VN M.20 control panel, featuring the BENINCA logo and two prominent green buttons for operation.
4. Setup jeung Instalasi
Professional installation is highly recommended for this product. Ensure all safety precautions are followed.
4.1. Pamariksaan Pra-instalasi
- Verify the door operates smoothly and is well-balanced.
- Confirm the door shaft diameter is 1 inch.
- Ensure adequate structural support for mounting the motor and base.
- Confirm availability of 230 Vac power supply at the installation site.
4.2. Mounting the Motor Unit
- Securely attach the motor base to the wall or ceiling structure using appropriate fasteners. Ensure the base is level and robust enough to support the motor's weight (approximately 60 pounds).
- Mount the motor unit onto the base, ensuring it is correctly aligned with the door shaft.
- Connect the motor's drive mechanism to the 1-inch door shaft.
4.3. Wiring the Control Panel
- Mount the control panel in a secure, accessible location, away from moving parts and potential damage.
- Connect the 230 Vac power supply to the designated terminals on the control panel. Refer to the wiring diagram provided with the product packaging for specific connections.
- Connect the motor unit to the control panel using the provided cables, ensuring correct polarity and terminal assignments.
- If external safety devices (e.g., photocells, safety edges) are used, connect them to the appropriate terminals on the control panel.
4.4. Adjusting Limit Switches
The VN M.20 features adjustable limit switches to define the door's fully open and fully closed positions.
- With power applied, manually operate the door to its desired fully open position.
- Adjust the 'Open' limit switch on the motor unit or control panel (refer to specific product diagrams) until the door stops precisely at this position.
- Repeat the process for the 'Close' limit switch, setting the desired fully closed position.
- Test the limits multiple times to ensure consistent and accurate stopping.
5. Parentah Operasi
5.1. Operasi dasar
- Muka panto: Press the designated 'Open' button on the control panel or remote control. The door will move to its fully open limit.
- Nutup panto: Press the designated 'Close' button on the control panel or remote control. The door will move to its fully closed limit.
- Stopping the Door: Press the 'Stop' button (if available) or any operational button during movement to halt the door.
5.2. Papasangan Jauh Jauh
To pair a new remote control with the integrated receiver:
- Locate the 'Learn' or 'Program' button on the control panel (refer to the control panel diagram).
- Press and hold the 'Learn' button until an indicator light (LED) illuminates or flashes.
- Within a few seconds, press the desired button on your remote control. The indicator light should change or flash differently to confirm successful pairing.
- Test the remote control to ensure it operates the gate opener correctly.
6. Pangropéa
Regular maintenance ensures the longevity and safe operation of your BENINCA Gate Opener VN M.20.
6.1. Pamariksaan Rutin (Bulanan)
- Inspect the motor unit and mounting for any loose fasteners or signs of wear.
- Check the door's balance and smooth operation.
- Verify that safety devices (e.g., photocells) are functioning correctly.
- Listen for any unusual noises during operation.
6.2. beberesih
- Keep the motor unit and control panel free from dust, dirt, and debris. Use a soft, dry cloth.
- Entong nganggo bahan kimia kasar atanapi beberesih kasar.
6.3. Lubrication (Annually or as needed)
- Lubricate any moving mechanical parts of the gate opener and the door itself as recommended by the door manufacturer.
- Consult a qualified technician for internal lubrication of the motor unit.
7. Cara ngungkulan
This section provides solutions to common issues. For complex problems, contact qualified technical support.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Motor teu ngabales paréntah. | No power supply; Blown fuse; Remote control battery dead; Safety device activated. | Check power connection; Replace fuse; Replace remote battery; Check safety sensors for obstructions or misalignment. |
| Door stops unexpectedly during operation. | Obstruction detected; Safety device triggered; Limit switch malfunction. | Remove obstruction; Check safety sensors; Inspect and readjust limit switches. |
| Door does not fully open or close. | Limit switches incorrectly set; Door balance issue. | Readjust limit switches (Section 4.4); Check door for proper balance and smooth movement. |
| Sora-sora anu teu biasa tina motor. | Lack of lubrication; Worn components; Misalignment. | Lubricate moving parts; Inspect for worn gears or bearings; Check alignment of motor and shaft. Contact service if noise persists. |
8. Spésifikasi Téknis
| Fitur | Rincian |
|---|---|
| Modél | VN M.20 |
| merek | BENINCA |
| Produsén | Bénika |
| Voltage | 230 Waktos |
| Item Beurat | 60 pon |
| Bahan | Beusi sténless |
| Warna | pérak |
| Tipe Pamasangan | Screw-In |
| UPC | 669737589198 |
9. Garansi jeung Rojongan
For specific warranty details, please refer to the warranty card included with your product packaging or contact your authorized BENINCA dealer. General warranty terms typically cover manufacturing defects for a specified period from the date of purchase.
For technical support, spare parts, or service inquiries, please contact your BENINCA distributor or visit the official BENINCA website for contact information. When contacting support, please have your model number (VN M.20) and purchase date readily available.
Sumberdaya Online: Kanggo inpormasi sareng dukungan tambahan, anjeun tiasa nganjang ka BENINCA official websitus.
