Bubuka
The Hifonics Zeus ZG-600.4 is a 4-channel Class AB amplifier designed to deliver up to 600 watts of power for your car's audio system. It features a Simpatico Coil Design (SPC) with a dual-coil PWM MOSFET power supply for efficient operation and minimal heat generation. The amplifier utilizes Ultra-Fi output devices and an aluminum heatsink for superior thermal management. It offers both RCA and high-level inputs for flexible installation and can operate in 4-channel or bridged mono mode. Angled connection types facilitate clean wire management.

Gambar: Top view of the Hifonics Zeus ZG-600.4 amplirén, nuduhkeuncasing desain na sleek.
Setup sareng Instalasi
Pamasangan anu leres penting pisan pikeun pagelaran sareng kaamanan anu optimal. Disarankeun yén pamasangan dilaksanakeun ku profésional anu mumpuni.
1. Pamasangan Amppangagung
- Choose a secure, well-ventilated location in your vehicle, away from moisture and direct heat.
- Mastikeun spasi nyukupan sabudeureun éta amplifier for air circulation, especially around the aluminum heatsink.
- Gunung nu amplifier firmly using appropriate hardware to prevent movement during vehicle operation.
2. Sambungan Kakuatan
- Connect the main power cable directly to the vehicle's battery, ensuring an inline fuse is installed within 18 inches of the battery.
- Connect the ground cable to a clean, unpainted metal surface on the vehicle chassis, ensuring a solid electrical connection.
- Sambungkeun kabel pangaktipkeun jarak jauh ti head unit anjeun ka ampinput jarak jauh lifier.
- The amplifier operates with a 6 Volt input voltage.
3. Sambungan Input Audio
The ZG-600.4 offers both RCA (low-level) and high-level inputs for compatibility with various head units.
- Input RCA: Use high-quality RCA cables to connect the head unit's pre-amp outputs kana amplifier's CH1/CH2 and CH3/CH4 RCA inputs.
- Input Tingkat Tinggi: If your head unit lacks RCA outputs, use the high-level inputs. Connect the speaker wires from your head unit to the amplifier's high-level input terminals.
4. Sambungan Kaluaran Spiker
- Sambungkeun speaker anjeun ka ampterminal kaluaran spiker lifier. Pastikeun polaritasna leres (+ ka + sareng - ka -).
- The amplifier can be configured for 4-channel stereo or bridged mono operation. Refer to the "Operating Instructions" section for mode selection.

Image: Rear panel of the Hifonics Zeus ZG-600.4 amplifier, detailing the input, output, and control sections.
Parentah Operasi
The Hifonics Zeus ZG-600.4 amplifier offers various controls to fine-tune your audio system.
1. Daya Hurung / Pareum
- The amplifier will power on automatically when the remote turn-on signal is received from your head unit.
- A power indicator light will illuminate when the ampLifier nyaeta operasional.
2. Level (Gain) Adjustment
- The "LEVEL" knobs adjust the input sensitivity (gain) for each channel pair (CH1/CH2 and CH3/CH4).
- Setel gain pikeun cocog sareng voltase kaluarantage tina head unit anjeun. Mimitian ku gain minimal teras laun-laun tambahkeun dugi ka volume anu dipikahoyong kahontal tanpa distorsi.
- Catetan: Setting the gain too high can lead to distorted sound and potential damage to speakers or the amppangagung.
3. Crossover Settings (X-OVER)
The amplifier features adjustable crossovers to direct specific frequency ranges to your speakers.
- Pindah MODE: Select between 2CH (2-channel), 4CH (4-channel), or MONO (bridged mono) operation.
- HIGH PASS (HPF): Filters out frequencies below the set point. Useful for full-range speakers to prevent them from playing low bass.
- LONTAR HANDAP (LPF): Filters out frequencies above the set point. Useful for subwoofers.
- FULL: Bypasses the crossover, allowing full-range audio.
- X-OVER FREQUENCY: Adjusts the cutoff frequency for the high-pass or low-pass filter.
- Catetan: Some users have reported issues with the built-in hi-pass filter. External filters may be considered if optimal performance is not achieved.
4. Bass EQ / Subsonic Filter
- BASS EQ: Provides a bass boost at a specific frequency. Use sparingly to avoid distortion.
- SUBSONIC: Filters out extremely low, inaudible frequencies that can waste ampkakuatan liifier sareng ngaruksak subwoofer.

Image: Close-up of the Hifonics Zeus logo on the amplifier's brushed metal casing.
Pangropéa
Regular maintenance ensures the longevity and optimal performance of your Hifonics Zeus amppangagung.
- beberesih: Ngusap périodik amplifier's exterior with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners. Ensure ventilation fins are free from dust and debris to maintain proper cooling.
- Cék sambungan: Regularly inspect all power, ground, remote, and audio connections. Ensure they are secure and free from corrosion. Loose connections can lead to poor performance or damage.
- Ventilasi: Pastikeun yén amplifier's mounting location allows for adequate airflow. Blocked vents can lead to overheating and activation of protection circuits.
- Inspeksi sekering: Check the inline fuse on the power cable periodically. If the amplifier fails to power on, inspect this fuse first. Always replace with a fuse of the correct amperage.
Pamérésan masalah
This section addresses common issues you might encounter with your Hifonics Zeus ZG-600.4 amppangagung.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Amplifier teu daya on. | No power, poor ground, faulty remote turn-on, blown fuse. | Check power and ground connections. Verify remote turn-on signal. Inspect and replace fuses if necessary. |
| Amplifier asup kana modeu panyalindungan. | Overheating, short circuit in speaker wiring, impedance mismatch, low voltage. | Ensure proper ventilation. Check speaker wiring for shorts. Verify speaker impedance. Check vehicle's battery voltage. Ngawenangkeun amplifier pikeun niiskeun. |
| Teu aya sora atanapi sora distorsi. | Incorrect gain setting, loose audio connections, faulty RCA cables, incorrect crossover settings, damaged speakers. | Adjust gain properly. Check all RCA and speaker connections. Verify crossover settings (HPF/LPF). Test speakers with another source if possible. |
| Signal dropouts or noise. | Poor quality cables, ground loop, faulty unit. | Use shielded RCA cables. Ensure proper grounding. If issues persist, the unit may be faulty and require professional inspection. |
| Gain/adjustment dials are loose or stripped. | Manufacturing defect or wear. | Contact Hifonics customer support or your retailer for assistance. This may require repair or replacement. |
| Built-in hi-pass filter not effective. | Unit characteristic or specific setup incompatibility. | Consider using external hi-pass filters (e.g., RCA hi-pass filters) if precise frequency control is needed. |
spésifikasi
| Fitur | Rincian |
|---|---|
| Ngaran modél | HIFZG6004 (ZG-600.4) |
| Nomer Modél Item | 600 Watt 4 Saluran |
| merek | Hifonics |
| Speaker Maksimum Kaluaran Power | 600 Watt |
| Jumlah Sirkuit | 4 |
| Mode Kaluaran Audio | Mono (also supports Stereo) |
| Masukan Voltage | 6 volt |
| Réspon Frékuénsi | 40 Hz |
| Rasio Signal-to-Noise | 0.5 dB |
| Téhnologi konektipitas | Dikabel |
| Tipe Pamasangan | Pasang Mobil |
| Bahan | logam |
| Warna | pérak |
| Dimensi produk | 1 "D x 1" W x 1" H |
| Item Beurat | 6.18 pon |
| Nyaéta Waterproof | Palsu |
| Komponén Kaasup | Produk, Manual |
| UPC | 806576231189 |
Émbaran jaminan
The Hifonics Zeus ZG-600.4 amplifier hadir kalawan a Garansi kawates. Specific terms and conditions of the warranty, including duration and coverage details, are typically provided with the product packaging or can be found on the official Hifonics websitus.
Please retain your proof of purchase for any warranty claims. For detailed warranty information or to initiate a claim, refer to the documentation included with your product or contact Hifonics customer support directly.
Rojongan Palanggan
For further assistance, technical support, or inquiries regarding your Hifonics Zeus ZG-600.4 amplifier, please utilize the following resources:
- Resmi Websitus: Nganjang ka Toko Hifonics pikeun inpormasi produk, FAQ, sareng detil kontak dukungan.
- Included Manual: Refer to the physical manual included in the product packaging for additional diagrams and specific instructions.
- Dealer Otorisasi: Contact the retailer from whom you purchased the product for local support and service.





