Grundig 11562 Universal TV Remote Control User Manual

Bubuka

This manual provides detailed instructions for the setup, operation, and maintenance of your Grundig 11562 Universal TV Remote Control. Please read this manual thoroughly before using the remote control to ensure proper functionality and to maximize your viewpangalaman.

Gambar: Hareupeun view of the Grundig 11562 Universal TV Remote Control, showing its button layout.

Disetél

1. Pamasangan batré

1. Panggihan kompartemen batré dina tonggong kadali jauh.
2. Geser panutup kompartemen batré ka handap atanapi ka luar pikeun mukakeunana.
3. Insert two AAA or AA alkaline batteries, ensuring the positive (+) and negative (-) terminals match the diagrams inside the compartment. (Note: Batteries are not included.)
4. Ganti panutup kompartemen batré, mastikeun eta clicks aman kana tempatna.

2. Ngatur Program Jauh Jauh

The Grundig 11562 is a universal remote control designed to work with various TV brands. Programming is typically required for initial use.

Method 1: Auto Code Search

1. Hurungkeun televisi anjeun sacara manual.
2. Arahkeun kadali jauh ka arah TV.
3. Press and hold the 'SET' button (or a similar programming button, refer to the remote's specific button layout) until the indicator light on the remote turns on.
4. While holding 'SET', press the 'POWER' button once. The indicator light should blink.
5. Release both buttons. The remote is now in auto-search mode.
6. Wait for the TV to turn off. This indicates that a compatible code has been found.
7. Immediately press the 'SET' button again to save the code. The indicator light will turn off.
8. Test the remote's functions (e.g., volume, channel, power). If not all functions work, repeat the process to find a better code.

Method 2: Manual Code Entry

If your TV brand has a specific code list (often provided with the remote or available online), you can enter it manually.

1. Hurungkeun televisi anjeun sacara manual.
2. Locate the 3 or 4-digit code for your TV brand from the provided code list.
3. Press and hold the 'SET' button until the indicator light turns on.
4. Enter the code using the numeric keypad. After each digit, the indicator light should blink.
5. Once the last digit is entered, the indicator light should turn off.
6. Test the remote's functions. If it does not work, try another code from the list for your TV brand.

Ngoperasikeun Remote Control

The Grundig 11562 remote control features 40 buttons for comprehensive TV control. Below are the general functions of common buttons:

• kakuatan: Ngahurungkeun atawa mareuman TV.
• Bisu: Ngajempékeun atanapi nganonaktipkeun sora TV.
• VOL +/-: Ngaronjatkeun atawa ngurangan polumeu.
• CH +/-: Ngarobah saluran kaluhur atanapi kahandap.
• Papan tombol angka (0-9): Langsung ngasupkeun nomer saluran.
• MENU: Ngaksés ménu utama TV.
• ARROW/NAVIGATION Buttons: Navigates through TV menus and options.
• OKÉ/Asupkeun: Konfirmasi pilihan dina ménu.
• KALUAR: Kaluar tina ménu atanapi pungsi ayeuna.
• SOURCE/INPUT: Changes the input source (e.g., HDMI 1, AV).
• INFO: Némbongkeun informasi program.

Note: Specific button labels and their exact functions may vary slightly depending on the TV model and the programmed code.

Pangropéa

beberesih

Pikeun ngabersihkeun remot kontrol anjeun, anggo lawon anu lemes sareng garing. Pikeun kokotor anu bandel, radaampen the cloth with water or a mild, non-abrasive cleaner. Avoid using harsh chemicals or excessive moisture, as these can damage the remote's electronics or finish.

Ngagantian batré

Replace the batteries when the remote control's range decreases significantly or if the indicator light does not illuminate when a button is pressed. Always replace both batteries at the same time with new ones of the same type (AAA or AA alkaline).

Pamérésan masalah

• Jauh teu jalan:
  • Pariksa naha batréna diselapkeun leres kalayan polaritasna anu leres.
  • Ganti batré heubeul ku nu anyar.
  • Ensure there are no obstructions between the remote and the TV's infrared sensor.
  • Reprogram the remote control using the setup instructions.
• Only some buttons work:
  • The current programmed code may not be fully compatible with your TV. Try reprogramming the remote using a different code for your TV brand or using the auto code search function again.
• Jarak jauhna goréng:
  • Ganti batréna.
  • Ensure you are within the maximum operating range of 10 meters and have a clear line of sight to the TV.

spésifikasi

Garansi sareng Rojongan

For warranty information and specific support inquiries, please refer to the documentation provided with your purchase or contact your retailer. Grundig's official website may also provide additional support resources and contact details.