1. Bubuka
This manual provides detailed instructions for the safe installation, operation, and maintenance of your DAKASON 4FT LED Vapor Tight Light. Please read this manual thoroughly before installation and retain it for future reference.
The DAKASON 4FT LED Vapor Tight Light is a high-efficiency lighting fixture designed for demanding environments. It features adjustable wattage (40W/50W/60W), 0-10V dimming capability (dimmer not included), and an IP65 rating for resistance against water, dust, and harsh conditions.
2. Émbaran Kasalametan
WARNING: Risk of electric shock. Installation must be performed by a qualified electrician in accordance with all national and local electrical codes.
- Pegatkeun sambungan kakuatan dina sekering atawa circuit breaker saméméh instalasi atawa ngalayanan.
- Mastikeun suplai voltage is compatible with the fixture (100-277V).
- Do not handle live wires.
- Pastikeun sadaya sambungan aman sareng insulated leres.
- Ulah ngaropéa fixture nu.
- Anggo alat pelindung pribadi (PPE) anu pas nalika dipasang.
- This fixture is designed for indoor/outdoor use in wet, damp, and dusty areas.
3. Eusi Paket
Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan:
- 1 x 4FT LED Vapor Tight Lighting Fixture
- 10 x Stainless Steel Clips
- 2 x ningkatna Kurung
- 4 x Plastic Wall Plugs
- 4 x sekrup
- 1 x Waterproof Cable Gland
Figure 3.1: Included mounting kit and components.
4. Spésifikasi
| Fitur | Spésifikasi |
|---|---|
| Nomer modél | VPD-4A-50KFD |
| Wattage | 60W (Adjustable to 50W/40W) |
| Kaluaran Lumén | 6600lm (at 60W) |
| Suhu Warna | 5000K (Bodas Beurang) |
| Masukan Voltage | AC 100-277V |
| Peunteun IP | IP65 (Tahan Cai, Tahan Lebu) |
| Dimming | 0-10V Bisa Diredupkeun (Dimmer teu kaasup) |
| Bahan | Polycarbonate, Stainless Steel |
| Diménsi | 47.2 "L x 3.74" W x 3.38" H |
| Beurat | 4.91 pon (2.23 kg) |
| Sertifikasi | UL Didaptarkeun |
| Jangka waktu hirup | 50,000 jam |
Figure 4.1: IP65 rating details for the vapor tight light.
5. Parentah instalasi
This fixture supports surface/wall mount and suspension mount (additional accessories required for suspension). The following steps detail surface/wall mounting.
- Pareuman kakuatan: Before starting, ensure electrical power is turned off at the fuse or circuit breaker box to prevent electric shock.
- Mark mounting locations: Use the mounting brackets to mark the desired locations for drilling holes on the mounting surface.
- Install mounting brackets: Drill holes and secure the mounting brackets to the surface using the provided screws and wall plugs.
- Nyiapkeun kabel: Open the fixture housing. Feed the supply wire (not included) through the waterproof cable gland. Select the desired wattage (40W/50W/60W) using the internal switch.
- Sambungan kawat: Connect the supply wires to the LED driver according to the wiring diagram.
- Black (Line) to L
- White (Neutral) to N
- Green (Ground) to Gnd
- Purple (Dim+) and Gray (Dim-) for 0-10V dimming control (if applicable).
- Mount fixture: Lift the fixture housing and snap it into place on the installed mounting brackets.
- Secure lens: Position the lens onto the fixture housing and secure it with the stainless steel latches/clips. Ensure the lens is tightly sealed with the housing to maintain the vapor-tight integrity.
Figure 5.1: Hard-wired installation steps and wiring diagram.
Video 5.1: Demonstration of mounting bracket installation for the vapor tight light.
6. Parentah Operasi
Once installed and wired correctly, the DAKASON LED Vapor Tight Light is ready for operation.
- Daya Hurung: Restore power at the circuit breaker. The light will illuminate.
- Wattage Pilihan: The fixture has a selectable wattage switch (40W/50W/60W) located inside the housing. Adjust this switch sateuacan sealing the fixture and restoring power to set the desired light output.
Figure 6.1: Internal wattage switch pilihan.
- Fungsi dimming: If connected to a compatible 0-10V dimmer switch (not included), the light output can be adjusted from 0% to 100%.
Video 6.1: Demonstration of 0-10V dimming capability in a warehouse setting.
7. Pangropéa
The DAKASON LED Vapor Tight Light is designed for minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:
- beberesih: Bersihkeun bagian luar perlengkapan sacara berkala nganggo lap anu lemesamp cloth. Do not use abrasive cleaners or solvents, as these can damage the polycarbonate housing and lens. Ensure power is off before cleaning.
- Pamariksaan: Regularly inspect the fixture for any signs of damage, loose connections, or wear. Pay attention to the waterproof cable gland and stainless steel clips to ensure the seal remains intact.
- Henteu aya Bagian anu Bisa Dilayanan Pamaké: There are no user-serviceable parts inside the fixture. Do not attempt to open or repair the LED driver or LED chips. Contact qualified personnel for any repairs.
8. Cara ngungkulan
If you experience issues with your DAKASON LED Vapor Tight Light, refer to the following troubleshooting guide:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Lampu teu hurung |
|
|
| Lampu kedip-kedip atanapi redup teu disangka-sangka |
|
|
| Ngurangan kaluaran cahaya |
|
|
If the problem persists after attempting these solutions, please contact DAKASON customer support.
9. Garansi jeung Rojongan
DAKASON provides a garansi 5 taun for this LED Vapor Tight Light, covering defects in materials and workmanship under normal use.
For warranty claims, technical support, or any questions regarding your product, please contact DAKASON customer service through the retailer where the product was purchased or visit the official DAKASON websitus pikeun inpo kontak.
Please have your model number (VPD-4A-50KFD) and purchase date available when contacting support.
