Buku Panduan Pangguna Pedal Éfék Kombo Stereo Delay & Reverb FLAMMA FS22

1. Bubuka

The FLAMMA FS22 Ekoverb is a stereo delay and reverb combo effects pedal designed for guitarists seeking versatile ambient soundscapes. This pedal integrates three distinct combinations of delay and reverb effects, offering a wide range of tonal possibilities. It features intuitive controls, dual footswitches, and stereo input/output for flexible integration into various setups.

The FLAMMA FS22 pedal, showcasing its red metallic chassis and control knobs.

2. Fitur konci

• 3 Delay & Reverb Combinations: Features Reverse Delay/Swell Reverb, Analog Echo Delay/Mod Reverb, and Analog Delay/Shimmer Reverb.
• Tap Tempo & Freeze Function: Dedicated footswitch for setting delay time and creating infinite sustain.
• Trail On Function: Allows effects to fade out naturally after bypass.
• Bypass leres: Minimizes signal loss when the effect is disengaged.
• Stereo/Mono I/O: 1/4-inch unbalanced stereo and mono input/output jacks for flexible connectivity.
• Multi-knob Control: Independent controls for Delay (Level, Time, Tone, Feedback) and Reverb (Level, Decay, Tone, Pre-Delay).
• Konstruksi awét: Vibrant red metallic chassis.

3. Kontrol jeung Fungsi

The FS22 pedal features a comprehensive set of controls to shape your delay and reverb effects. Familiarize yourself with each knob and switch for optimal performance.

This diagram details the individual controls for both delay (Level, Time, Tone, Feedback) and reverb (Level, Decay, Tone, Pre-Delay) sections, allowing precise effect shaping.

3.1. Kenop kontrol

• TINGKAT TUNDA: Adjusts the volume level of the delay effect.
• WAKTU TUNDA: Ngadalikeun waktos reureuh.
• DELAY TONE: Adjusts the tone color of the delay effect.
• Eupan balik reureuh: Controls the number of delay repeats.
• TINGKAT REVERB: Adjusts the volume level of the reverb effect.
• REVERB DECAY: Controls the decay time of the reverb effect.
• REVERB TONE: Adjusts the tone color of the reverb effect.
• REVERB PRE-DELAY: Controls the pre-delay time of the reverb effect.

A lengkep view of the Level, Time, Tone, Feedback, Decay, and Pre-Delay knobs, along with the 1-2-3 mode selector switch.

3.2. Toggle Pindah

• 1-2-3 Selector: This switch selects between the three available delay and reverb combo effects.

3.3. Sampéan

• TAP / TAHAN Sakelar suku: Used for Tap Tempo functionality and activating the Freeze effect.
• Saklar Suku BYPASS: Ngalibetkeun atawa ngaleungitkeun éfékna.

4. Setélan

4.1. Power Supply

The FLAMMA FS22 requires a 9V DC power supply with a center-negative polarity. It is recommended to use an isolated or individual power supply to prevent unexpected noise caused by sharing a power supply with other pedals.

4.2. Nyambungkeun Pedal

The FS22 features 1/4-inch unbalanced stereo and mono input/output jacks. Connect your instrument to the input(s) and your amplifier or other effects to the output(s).

• Mono Setup: Connect your guitar to INPUT-L (MONO) and connect OUTPUT-L (MONO) to your amppangagung.
• Setup stereo: Connect your guitar to INPUT-L (MONO) and another signal source (e.g., another pedal's stereo output) to INPUT-R. Connect OUTPUT-L and OUTPUT-R to two separate amplampu latar atawa alat input stereo.

The FS22 supports both stereo and mono input/output, providing flexibility for various audio setups.

5. Modeu Operasi

The FS22 offers three distinct delay and reverb combinations, selectable via the toggle switch:

This image illustrates the three distinct delay and reverb combinations available on the FS22 pedal, including Reverse Delay/Swell Reverb, Real Echo/Mod Reverb, and Analog Delay/Shimmer Reverb.

To select an operating mode, simply move the toggle switch to the desired position (1, 2, or 3).

6. Fungsi Maju

6.1. Ketok Tempo

The TAP/HOLD footswitch allows you to set the delay time by tapping it two or more times. The delay time will synchronize with your tap tempo.

6.2. Freeze Function

Press and hold the TAP/HOLD footswitch to activate the Freeze function. This will sustain the current effect sound indefinitely, creating ambient pads or drones. Release the footswitch to disengage Freeze.

6.3. Trail On Function

When the Trail On function is enabled, the effects will naturally decay and fade out even after the pedal is bypassed. This prevents an abrupt cut-off of the effect tail. Refer to the full manual for instructions on enabling/disabling this feature.

Key features such as Tap Tempo for setting delay time, Freeze for infinite sustain, Trail On for natural effect fade-out, and True Bypass for signal integrity are shown.

7. Pangropéa

• beberesih: Use a soft, dry cloth to clean the pedal. Avoid using abrasive cleaners or solvents.
• Panyimpenan: Simpen pedal di lingkungan anu garing, jauh tina suhu anu ekstrim sareng sinar panonpoé langsung.
• kakuatan: Salawasna pegatkeun sambungan catu daya nalika pedal henteu dianggo salami waktos anu lami.

8. Cara ngungkulan

• Henteu aya sora: Ensure all cables are securely connected, the power supply is correctly plugged in, and the pedal is engaged (BYPASS LED is on). Check your instrument and ampsambungan liifier.
• Noise nu teu dihoyongkeun: Verify that you are using a 9V DC center-negative power supply. If using a daisy chain, ensure it is isolated or try an individual power supply for the FS22. Check for ground loops in your setup.
• Effect Not Working: Confirm the toggle switch is set to a desired effect mode (1, 2, or 3) and the effect level knobs are not set to zero.

If you encounter persistent issues, please refer to the official FLAMMA support resources or contact customer service.

9. Spésifikasi

10. Garansi jeung Rojongan

FLAMMA products typically come with a limited warranty. Please refer to the warranty card included with your product or visit the official FLAMMA websitus pikeun istilah jeung kaayaan jaminan lengkep.

For technical support, product inquiries, or service requests, please visit the FLAMMA Store on Amazon or the official FLAMMA websitus.