Bubuka
This manual provides detailed instructions for the safe and proper installation and use of your Pipishell Fixed TV Wall Mount, model PIML2. Please read all instructions carefully before beginning installation to ensure correct assembly and to prevent damage or injury. Keep this manual for future reference.
Émbaran Kasalametan
- Kapasitas beurat: Ulah ngaleuwihan kapasitas beurat maksimum 99 lbs (45 kg).
- Ukuran TV: Designed for TVs between 26 and 55 inches.
- Jenis Témbok: This mount is designed for installation on wood studs (16" spacing), solid concrete walls, or brick walls. ULAH dipasang dina drywall nyalira.
- Pamasangan profésional: Upami anjeun henteu yakin kana prosés pamasangan, konsultasi ka profésional anu mumpuni.
- Pakakas: Ensure you have all necessary tools before starting.
- Barudak: Tetep barudak jauh ti wewengkon gawé salila instalasi.
Eusi pakét
Verify that all components are present and undamaged before installation. If any parts are missing or defective, contact Pipishell customer service.

Image: The Pipishell PIML2 Fixed TV Wall Mount showing the wall plate and TV brackets.
- Majelis Lempeng témbok
- Braket TV (2x)
- Pakakas Pemasangan (rupa-rupa sekrup, ring, spacer, jangkar)
- Instruksi Manual
Cék kasaluyuan
Before proceeding with installation, ensure your TV and wall are compatible with the Pipishell PIML2 mount.

Image: Visual guide for checking wall type, TV size/weight, VESA pattern, and cable outlet clearance.
- Check Your Wall Type:
- This mount is suitable for 16-inch wood studs, solid concrete walls, jeung témbok bata.
- PERHATOSAN: Ulah dipasang dina drywall nyalira.
- Check Your TV Size and Weight:
- Compatible TV sizes: 26 nepi ka 55 inci.
- Beurat TV maksimum: 99 lbs (45 kg).
- Check Your VESA Pattern:
- Measure the horizontal and vertical distance between the mounting holes on the back of your TV. This is your VESA pattern.
- Compatible VESA patterns (horizontal x vertical): 100x100mm, 200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm.

Image: Illustration of VESA measurement on the back of a television.
- Check Cable Outlet Clearance:
- Ensure that the mounting plate will not block any cable outlets or ports on the back of your TV.
Setup sareng Instalasi
Follow these steps carefully for a secure installation. It is recommended to have two people for TV mounting.
Parabot anu diperyogikeun (Teu Kalebet):
- Alat Panyungsi Paku (pikeun pamasangan paku kai)
- Pensil
- Bor
- Drill Bits (specific sizes for wood studs or concrete/brick)
- Tingkat
- Phillips Kepala Obeng
- Socket Wrench (recommended)
Lengkah 1: Gantelkeun kurung TV kana TV
- Sacara ati-ati tempatkeun TV anjeun nyanghareup ka handap dina permukaan anu lemes sareng bersih pikeun nyegah karusakan layar.
- Identify the correct diameter and length of screws (M4, M6, or M8) that fit your TV's mounting holes. Use washers and spacers as needed to ensure a snug fit without overtightening.
- Attach the two TV brackets to the back of your TV using the selected screws. Ensure the brackets are centered and level, with the hooks facing downwards.
Step 2: Mount Wall Plate to Wall

Image: Visual guide for different wall types and corresponding mounting methods.
- Pikeun Pamasangan Kayu Stud:
- Use a stud finder to locate the edges of two adjacent wood studs. Mark the center of the studs. The mount is designed for 16-inch stud spacing.
- Position the wall plate on the wall, ensuring it is level and centered at your desired height. Mark the pilot hole locations through the wall plate onto the studs.
- Drill pilot holes (e.g., 7/32" or 5.5mm) into the center of the marked stud locations.
- Pasangkeun pelat témbok kana témbok nganggo baut lag sareng ring anu disayogikeun. Kencengkeun pageuh tapi ulah kenceng teuing.
- Pikeun Pamasangan Témbok Beton/Bata:
- Position the wall plate on the wall, ensuring it is level and centered at your desired height. Mark the pilot hole locations through the wall plate.
- Drill pilot holes (e.g., 3/8" or 10mm) to a depth of approximately 2.36 inches (60mm) into the concrete or brick.
- Insert the concrete anchors into the drilled holes until they are flush with the wall surface.
- Secure the wall plate to the wall using the provided lag bolts and washers. Tighten firmly.
Step 3: Hang TV on Wall Plate

Image: Two individuals carefully lifting a television towards the installed wall mount.
- Kalayan bantosan, angkat TV kalayan ati-ati nganggo braket anu napel.
- Sejajarkeun kait dina braket TV sareng ujung luhur pelat témbok.
- Gently lower the TV, ensuring the brackets engage securely with the wall plate.
- Once the TV is seated, pull the quick-release straps (located at the bottom of the TV brackets) downwards to lock the TV in place. Ensure both sides are securely locked.

Gambar: Detil view of the quick lock and release mechanism for securing the TV.
Operasi
The Pipishell PIML2 is a fixed TV wall mount designed for a low-profile installation. Once installed, the TV remains in a static position close to the wall.

Gambar: Hiji sisi view nunjukkeun pro-rendahfile design, with the TV mounted 1.26 inches from the wall.
Removing the TV:
To remove the TV from the wall mount, pull the quick-release straps located at the bottom of the TV brackets. This will disengage the locking mechanism, allowing you to lift the TV off the wall plate. Always have assistance when removing the TV.
Pangropéa
- beberesih: Lap dudukan ku lawon anu lemes sareng garing. Hindarkeun pembersih atanapi pangleyur anu abrasif.
- Cék périodik: Pariksa sadaya sekrup sareng baut sacara berkala pikeun mastikeun éta tetep pageuh sareng aman.
- Ruksakna: If any part of the mount appears damaged, discontinue use and contact customer service.
Pamérésan masalah
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| TV teu tingkat sanggeus instalasi. | Wall plate or TV brackets were not level during installation. | Carefully remove the TV, adjust the wall plate or TV brackets, and re-mount, ensuring a level position. |
| TV does not securely attach to the wall plate. | TV brackets not properly engaged with the wall plate; quick-release straps not pulled. | Ensure the TV brackets are fully seated on the wall plate and pull the quick-release straps until they click into the locked position. |
| Mount karasana teu stabil. | Improper installation; screws not tightened; incorrect wall type used. | Review installation steps. Ensure all bolts are securely tightened. Verify wall type compatibility and correct anchors/screws were used. If unsure, consult a professional. |
spésifikasi
| Fitur | Rincian |
|---|---|
| Nomer modél | PIML2 |
| Kasaluyuan Ukuran TV | 26 - 55 inci |
| Kapasitas beurat | Nepi ka 99 lbs (45 kg) |
| Kasaluyuan VESA | 100x100mm, 200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm |
| Wall Distance (Low Profile) | 1.26 inci (32mm) |
| Kasaluyuan Tipe témbok | 16" Wood Studs, Solid Concrete, Brick Wall |
| Bahan | Alloy Steel |
| Warna | Hideung |
Rojongan Palanggan
For any questions, missing parts, or assistance with installation, please contact Pipishell customer service. Our team is available to help you.
Inpormasi kontak:
- Surélék: supportus@pipishell.net
- Online Support: Visit the official Pipishell websitus pikeun FAQs jeung sumber tambahan.





