Manual Pangguna Cisco Meraki MR76 Wi-Fi 6 Titik Aksés Luar Ruangan/Industri

1. Bubuka

This manual provides essential information for the installation, configuration, and maintenance of your Cisco Meraki MR76 Wi-Fi 6 Outdoor/Industrial Access Point. The MR76 is designed for high-performance wireless connectivity in challenging outdoor and industrial environments, leveraging Wi-Fi 6 technology and integrated Bluetooth radios. It requires external antennas for operation and is managed through the Cisco Meraki cloud platform.

2. Émbaran Kasalametan

• Baca sagala parentah: Before installation and operation, carefully read and understand all instructions provided in this manual.
• tanaga mumpuni: Pamasangan sareng ngalayanan ngan ukur kedah dilakukeun ku tanaga anu mumpuni.
• Sumber kakuatan: Ensure the power source meets the specifications for Power over Ethernet (PoE) and is properly grounded.
• Instalasi anteneu: Install external antennas according to local regulations and manufacturer guidelines to avoid interference and ensure safety.
• Pertimbangan lingkungan: While designed for outdoor use, avoid installing the device in locations subject to extreme temperatures, direct lightning strikes, or excessive vibration.
• Bahaya listrik: Do not open the device enclosure. Refer all servicing to qualified service personnel.

3. Eusi Paket

Pariksa yén pakét anjeun ngandung barang-barang ieu:

• Cisco Meraki MR76 Access Point unit
• Mounting bracket (for pole or wall mounting)
• Mounting hardware (screws, anchors, hose clamps)
• Gancang Mimitian Guide
• Note: External antennas are required for operation and are sold separately.

4. Leuwih fisikview

The MR76 features a robust, weatherproof enclosure suitable for outdoor and industrial deployments. It includes ports for network connectivity and antenna connections.

Gambar 1: Hareupeun view of the Cisco Meraki MR76 Access Point. This image shows the compact design of the unit, which is built for outdoor and industrial environments.

Indikator LED

The device includes an LED indicator to provide status information:

• Héjo padet: Device is online and operating normally.
• Héjo kedip-kedip: Alat nuju di-boot atanapi nuju ningkatkeun firmware.
• Amber padet: Device is experiencing a fault or is not connected to the Meraki cloud.

Palabuhan sarta Panyambungna

• Port Ethernet: RJ45 connector for network connectivity and Power over Ethernet (PoE) input.
• Panyambung Antenna: Multiple N-type connectors for external Wi-Fi antennas.
• Tombol Reset: Small button for factory reset (requires a paperclip or similar tool).

5. Instalasi jeung Setup

5.1 Pasang Access Point

The MR76 can be mounted on a pole or a wall. Choose a location that provides optimal wireless coverage and is accessible for maintenance.

1. Pilih Lokasi: Identify a suitable mounting location, considering line of sight for wireless signals and proximity to a PoE-enabled network switch.
2. Pasang Bracket Pasang: Secure the mounting bracket to the pole using the provided hose clamps or to a wall using screws and anchors. Ensure the bracket is firmly attached.
3. Attach MR76 to Bracket: Align the MR76 unit with the mounting bracket and slide it into place until it clicks securely.

5.2 Connecting External Antennas

The MR76 requires external antennas for Wi-Fi operation. Ensure you use compatible N-type antennas.

1. Identify Antenna Ports: Locate the N-type connectors on the MR76.
2. Pasang Antenna: Carefully screw the external antennas onto the connectors. Hand-tighten only; do not overtighten.
3. Antena Posisi: Adjust the antenna orientation for optimal coverage based on your deployment plan.

5.3 Powering Alat

The MR76 is powered via Power over Ethernet (PoE).

1. Sambungkeun kabel Ethernet: Connect an Ethernet cable from a PoE-enabled switch or PoE injector to the Ethernet port on the MR76.
2. Verifikasi kakuatan: Once connected, the LED indicator on the MR76 should illuminate, indicating power.

5.4 Sambungan Jaringan

Ensure the Ethernet cable from the MR76 is connected to a network switch that has internet access and is configured for your Meraki network.

6. Operasi sareng Konfigurasi

The Cisco Meraki MR76 is managed entirely through the Meraki cloud dashboard. No local configuration is required.

1. Access Meraki Dashboard: Buka a web browser tur arahkeun ka dashboard.meraki.com. Log in with your Meraki account credentials.
2. Tambahkeun Alat: If this is a new device, add it to your network in the dashboard using its serial number.
3. Konpigurasikeun Setélan Jaringan: Within the dashboard, configure your wireless SSIDs, security protocols (WPA2, WPA3), VLANs, and other network-specific settings.
4. Ngawas kinerja: Use the dashboard to monitor the access point's status, client connectivity, and overall network performance.
5. Bluetooth Radios: The integrated Bluetooth radios can be configured and managed via the Meraki dashboard for location services or IoT applications.

7. Pangropéa

• Pembaruan firmware: Firmware updates are automatically managed and deployed by the Meraki cloud. Ensure your device has a stable internet connection for these updates.
• Inspeksi Fisik: Periodically inspect the device and antenna connections for any signs of damage, corrosion, or loose fittings, especially in harsh outdoor environments.
• beberesih: Gently clean the exterior of the device with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure all ports are sealed if not in use.
• Alignment anteneu: Re-check antenna alignment if wireless performance degrades or if the device has been subjected to strong winds or physical impact.

8. Cara ngungkulan

For further assistance, refer to the Cisco Meraki documentation or contact support.

9. Spésifikasi

10. Garansi jeung Rojongan

The Cisco Meraki MR76 includes a 5-year license and support package (MR76-HW+LIC-ENT-5YR). This package provides access to the Meraki cloud management platform, firmware updates, and 24/7 technical support.

For technical assistance, documentation, or to open a support case, please visit the official Cisco Meraki support portal:

https://meraki.cisco.com/support