RS PRO RSDS 1052 DL+ Digital Storage Oscilloscope User Manual

1. Bubuka

This manual provides comprehensive instructions for the safe and effective operation, maintenance, and troubleshooting of the RS PRO RSDS 1052 DL+ Digital Storage Oscilloscope. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage or injury.

The RS PRO RSDS 1052 DL+ is a versatile 2-channel digital storage oscilloscope with a 50 MHz bandwidth, designed for precise signal analysis. It features a 7-inch TFT LCD display for clear waveform visualization and supports various measurement parameters and mathematical operations.

2. Émbaran Kasalametan

Always adhere to the following safety precautions to prevent electric shock, fire, or damage to the instrument.

• Sumber Daya: Ensure the oscilloscope is connected to a power source within the specified voltage range (100-240V AC, 50/60Hz).
• Grounding: The instrument must be properly grounded to prevent electric shock. Do not defeat the grounding plug.
• Lingkungan: Operate the oscilloscope in a dry, well-ventilated area, away from direct sunlight, high temperatures, and excessive dust.
• Sigana: Use only probes supplied or recommended by RS PRO. Ensure probes are correctly rated for the voltage diukur.
• Pangropéa: Rujukkeun sadaya layanan ka petugas layanan anu mumpuni. Ulah nyobian muka alatna.asing unless explicitly instructed.
• Kategori Kasalametan: This device is rated CAT I, CAT II. Observe all safety warnings on the device and in this manual.

3. Produk Langkungview jeung Komponén

bagian ieu nyadiakeun leuwihview of the RS PRO RSDS 1052 DL+ oscilloscope and its main components.

Gambar 3.1: Hareupeun View of the Oscilloscope. This image shows the front panel of the RS PRO RSDS 1052 DL+ oscilloscope, highlighting the 7-inch TFT LCD display, control knobs, function buttons, and input connectors for channels 1 and 2. The screen displays a typical waveform and FFT analysis.

Gambar 3.2: Angled View of the Oscilloscope. This image provides an angled perspective of the RS PRO RSDS 1052 DL+ oscilloscope, showcasing its compact design and integrated handle for portability. The side ventilation grilles are also visible.

Gambar 3.3: Tukangeun View of the Oscilloscope. This image displays the rear panel of the RS PRO RSDS 1052 DL+ oscilloscope, featuring the power input, USB device port, USB host port, LAN port, and Pass/Fail output. Safety warnings and product labels are also visible.

Figure 3.4: Oscilloscope Probe and Accessories. This image shows a passive oscilloscope probe (1:1/10:1) along with various accessories, including colored rings for channel identification and probe tip covers. These are essential for connecting signals to the oscilloscope.

Figure 3.5: Power Plugs and Probe Tip. This image displays an assortment of power plugs (EU, UK, US types) that may be included with the oscilloscope, along with a specialized probe tip. These ensure compatibility with various power outlets and provide versatility for measurements.

3.1 Asesoris Anu Kalebet

The RS PRO RSDS 1052 DL+ typically includes the following accessories:

• Passive Probe 1:1/10:1 (x2)
• Kabel USB
• Gancang Mimitian Guide
• Sertipikat Kualitas
• Kabel Daya (spésifik daérah)
• CD (including User Manual and EasyScopeX software)

4. Setélan

4.1 Ngabongkar sareng Inspeksi

1. Carefully remove the oscilloscope and all accessories from the packaging.
2. Inspect the instrument for any signs of physical damage during transit. If damage is found, contact your supplier immediately.
3. Verify that all included accessories listed in Section 3.1 are present.

4.2 Sambungan Daya

1. Pastikeun saklar kakuatan dina panel pungkur dina posisi OFF.
2. Connect the provided power cord to the AC input on the rear panel of the oscilloscope.
3. Plug the other end of the power cord into a grounded AC power outlet. The oscilloscope supports 100-240V AC, 50/60Hz.

4.3 Sambungan Probe sareng Kompensasi

1. Connect the BNC connector of the passive probe to one of the input channels (CH1 or CH2) on the front panel.
2. Attach the probe tip to the probe compensation output (usually a square wave test signal) on the front panel.
3. Adjust the compensation trimmer on the probe until the displayed square wave is flat-topped, without overshoot or undershoot. This ensures accurate measurements.

5. Parentah Operasi

5.1 Operasi Dasar

• Hurungkeun/Pareuman: Press the power button on the front panel to turn the oscilloscope on or off.
• Setup Otomatis: Pencét éta Otomatis button to automatically adjust vertical, horizontal, and trigger settings for a stable waveform display.
• Kontrol Vertikal: Ngagunakeun éta VOLTS/DIV knob to adjust the vertical scale (voltage per division) and the POSISI knob to move the waveform vertically.
• Kontrol Horisontal: Ngagunakeun éta SEC/DIV knob to adjust the horizontal scale (time per division) and the POSISI knob to move the waveform horizontally.
• Kontrol Pemicu: Saluyukeun TINGKAT knob to set the trigger threshold. The trigger ensures a stable display of repetitive waveforms.

5.2 Fungsi Maju

• Fungsi pangukuran: Pencét éta Ukur button to access automatic measurement parameters such as Vpp, Vmax, Vmin, Freq, Period, etc.
• Fungsi Matematika: Pencét éta Matematika button to perform mathematical operations on waveforms (e.g., Add, Subtract, Multiply, Divide, FFT).
• Storage and Recall: Ngagunakeun éta Simpen/Ngelingan buttons to save waveform data, setups, or screenshots to internal memory or a USB drive.
• Konektipitas USB: Connect a USB drive to the front panel USB host port for data storage. Use the rear USB device port to connect the oscilloscope to a PC for data transfer and control via EasyScopeX software.

6. Pangropéa

6.1 beberesih

• Pegatkeun sambungan kabel listrik saméméh beberesih.
• Ngagunakeun lemes, damp cloth with mild detergent to clean the exterior of the instrument.
• Do not use abrasive cleaners or solvents that may damage the plastic parts.
• Ensure no liquid enters the instrument.

6.2 Kalibrasi

The oscilloscope is factory calibrated. For optimal performance, periodic calibration by qualified personnel is recommended, typically every 12-24 months, depending on usage and environmental conditions.

6.3 Panyimpenan

When not in use for extended periods, store the oscilloscope in a dry, dust-free environment, away from extreme temperatures and humidity.

7. Cara ngungkulan

Bagian ieu nyayogikeun solusi pikeun masalah umum anu anjeun tiasa patepang.

If the problem persists after attempting these solutions, please contact RS PRO customer support.

8. Spésifikasi

Key technical specifications for the RS PRO RSDS 1052 DL+ Digital Storage Oscilloscope:

• Saluran analog: 2
• Oscilloscope Type: Panyimpenan Digital
• Bandwidth: 50 MHz
• Waktu nyata Sample Laju: Up to 500 MSa/s
• Jerona mémori: 32 Kpts
• Jenis tampilan: TFT LCD
• Ukuran tampilan: 7 inches (800 x 480 pixels)
• Sensitipitas nangtung: 2mV/div to 10V/div
• Jangkauan Dasar Waktu: 10ns/div ka 50s/div
• Sasayogian tanaga: Mains operated (100-240V AC, 50/60Hz)
• beurat: 2.5 kg
• Kategori Kasalametan: CAT I, CAT II
• Antarbeungeut: RS232, USB Host, USB Device, LAN

9. Garansi jeung Rojongan

RS PRO products are manufactured to high standards and are typically covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official RS PRO websitus pikeun istilah jeung kaayaan jaminan lengkep.

For technical support, service, or inquiries regarding your RS PRO RSDS 1052 DL+ oscilloscope, please contact RS PRO customer service through their official channels. Contact information can usually be found on the RS PRO websitus atanapi dina dokuméntasi disadiakeun kalawan produk.

RS PRO Official Websitus: https://uk.rs-online.com/web/