Bubuka
The ASUS PRIME A520M-K is a Micro-ATX motherboard designed to support 3rd Generation AMD Ryzen processors. It features a robust power delivery system, comprehensive cooling solutions, and intelligent tuning options, providing a solid foundation for custom PC builds. This manual outlines the necessary steps for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your motherboard.
Figure 1: ASUS PRIME A520M-K motherboard and retail packaging.
Setup sareng Instalasi
Proper installation is crucial for the stability and performance of your system. Follow these general guidelines for installing your ASUS PRIME A520M-K motherboard and its components.
1. Motherboard Leuwihview
Gambar 2: Top-handap view of the ASUS PRIME A520M-K motherboard, highlighting key component locations.
2. Pamasangan komponén
- Pamasangan CPU: Ensure the CPU socket (AM4) lever is open. Align the triangular mark on your 3rd Gen AMD Ryzen processor with the mark on the socket, then gently place the CPU into the socket. Close the lever to secure the CPU.
- Pamasangan RAM: The motherboard supports DDR4 memory. Open the clips on the DIMM slots. Align the notch on the memory module with the key in the DIMM slot and press firmly until the clips snap into place.
- Pamasangan SSD M.2: Locate the M.2 slot. Insert your M.2 SSD at an angle and secure it with the provided M.2 screw package.
- Pamasangan Kartu Grafis (GPU): Insert your graphics card into the primary PCIe x16 slot. Ensure it is seated firmly and secured with a case screw.
- Sambungan Kakuatan: Sambungkeun konektor kakuatan ATX 24-pin sareng konektor kakuatan CPU 8-pin tina catu daya anjeun ka motherboard.
- Alat Panyimpen: Connect SATA drives using the provided SATA cables.
3. Panel I/O pungkur
The rear I/O panel provides various ports for external devices.
Gambar 3: Sambungan panel I/O tukang.
- Port USB: Sambungkeun alat USB sapertos kibor, beurit, sareng panyimpenan éksternal.
- Port Ethernet: Connect to your network using a 1Gb Ethernet cable.
- Kaluaran Video: Utilize the HDMI 2.1 (4K@60Hz) or D-Sub ports for display connections.
- Jacks audio: Sambungkeun speaker, headphone, atawa mikropon.
Parentah Operasi
Once your system is assembled, power it on and configure the BIOS/UEFI settings for optimal performance.
- Aksés BIOS/UEFI: Pencét éta DEL konci nalika ngamimitian pikeun asup ka utilitas setelan BIOS/UEFI.
- Mémori Profile (XMP): Aktipkeun Extreme Memory Profile (XMP) in the BIOS to utilize your RAM at its rated speed.
- Kontrol kipas: Use the ASUS Fan Xpert 2 utility or BIOS settings to configure fan speeds and cooling profiles for efficient thermal management.
- Pamasangan Sistem Operasi: Install your preferred operating system (e.g., Windows 10) from a bootable USB drive or optical media.
Pangropéa
Regular maintenance helps ensure the longevity and stable operation of your motherboard and PC components.
- Ngaleungitkeun lebu: Periodically clean dust from inside your PC case, especially from heatsinks (like the PCH heatsink) and fan blades, using compressed air.
- Pembaruan BIOS: Pariksa dukungan resmi ASUS website for the latest BIOS/UEFI firmware updates. Updating the BIOS can improve compatibility, stability, and performance. Follow the instructions provided by ASUS carefully during the update process.
- Manajemén Kabel: Ensure all cables are neatly routed and secured to prevent obstruction of airflow and accidental disconnections.
Pamérésan masalah
If you encounter issues with your motherboard, refer to these common troubleshooting steps.
- Henteu Kakuatan / Henteu Boot:
- Pastikeun sadaya kabel kakuatan (24-pin ATX, 8-pin CPU) disambungkeun aman.
- Pariksa naha catu daya berpungsi leres.
- Pastikeun konektor tombol kakuatan panel hareup bener napel motherboard nu.
- Henteu aya tampilan:
- Confirm the monitor is connected to the correct video output (HDMI or D-Sub) on the motherboard or dedicated graphics card.
- Pasang deui kartu grafik sareng modul RAM.
- Uji nganggo monitor atanapi kabel anu béda upami mungkin.
- Komponén Teu Dideteksi:
- Reseat the component (e.g., M.2 SSD, RAM).
- Check BIOS settings to ensure the component is enabled or recognized.
- Ensure drivers are installed for the operating system.
- Instabilitas Sistem / Kacilakaan:
- Check CPU and GPU temperatures using monitoring software.
- Ensure RAM is compatible and running at stable speeds (disable XMP temporarily if issues persist).
- Pariksa yén sadaya supir parantos mutahir.
- ASUS 5X Protection III: This motherboard incorporates multiple hardware safeguards for all-round protection, including LANGuard for network protection, DRAM overcurrent protection, overvoltage protection, SafeSlot Core for PCIe slot reinforcement, and a stainless-steel back I/O panel for durability.
spésifikasi
| Fitur | Spésifikasi |
|---|---|
| CPU Socket | AMDAM4 |
| Chipset | AMD A520 |
| Prosesor cocog | 3rd Gen AMD Ryzen, 3rd Gen AMD Ryzen with Radeon Graphics Processors |
| Téhnologi Mémori RAM | DDR4 |
| Laju mémori | 2400 MHz (Base, higher speeds supported via overclocking) |
| Panyimpenan | M.2 support, SATA 6Gb/s |
| Ethernet | 1 Gb Ethernet |
| palabuhan USB | USB 3.2 Gen 1 Type-A, USB 2.0 (2 ports) |
| Kaluaran Video | HDMI 2.1 (4K@60Hz), D-Sub |
| Faktor Bentuk | Mikro-ATX |
| Ukuran (L x W x H) | 10.23 x 10.63 x 2.03 inci |
| Beurat | 1.76 pon |
Produk Leuwihview Video
Hiji leuwihview video demonstrating the physical features and connectivity options of the ASUS PRIME A520M-K motherboard.
Garansi sareng Rojongan
For detailed warranty information, technical support, driver downloads, and further assistance, please visit the official ASUS support websitus. Simpen resi pameseran anjeun pikeun klaim jaminan.
Figure 4: Included accessories with the ASUS PRIME A520M-K motherboard.
