ATUMTEK ATMS050 Universal TV Stand Instruction Manual

Bubuka

This manual provides detailed instructions for the assembly, operation, and maintenance of your ATUMTEK ATMS050 Universal TV Stand. Please read this manual thoroughly before installation to ensure correct setup and safe use of the product. This stand is designed to securely hold LCD and LED televisions ranging from 37 to 65 inches, with a maximum weight capacity of 40 kg (88 lbs).

Image: The ATUMTEK ATMS050 Universal TV Stand, showcasing its sleek design and sturdy construction.

Émbaran Kasalametan

• Batesan Beurat: Do not exceed the maximum weight capacity of 40 kg (88 lbs). Overloading can result in serious injury or product damage.
• Ukuran TV: This stand is suitable for televisions between 37 and 65 inches. Ensure your TV falls within this range.
• Kasaluyuan VESA: Verify your TV's VESA mounting pattern is compatible with the stand (200x100mm to 600x400mm).
• Surface Stabil: Salawasna simpen meja TV dina permukaan anu datar, stabil, sareng rata supados henteu tibalik.
• Barudak jeung Pets: Keep children and pets away from the stand during assembly. Do not allow them to climb on or play with the stand or TV.
• Pamasangan anu leres: Follow all assembly instructions carefully. If you are unsure about any step, seek professional assistance.
• Cék biasa: Périodik pariksa sagala screws sareng sambungan pikeun mastikeun aranjeunna tetep kedap tur aman.

Eusi pakét

Before beginning assembly, please verify that all parts listed below are present and undamaged. All small parts are individually bagged and numbered for easy identification.

• A. Kolom Pangrojong Utama
• B. Dasar Kaca Tempered
• C. Braket Pemasangan TV (2 pcs)
• D. Lempeng VESA
• E. Base Support Plate
• F. Anti-Slip Feet (4 pcs)
• G. Klip Manajemén Kabel
• H. Hardware Kit (various screws, washers, spacers for TV mounting and stand assembly)
• I. Assembly Tools (Hex Key, Wrench)

Gambar: Detil view of the stand's components, including the main column, base, and mounting brackets, along with features like cable management, non-slip feet, and safety lock mechanism.

Parentah Majelis

Assembly typically takes about 15 minutes. Two necessary tools are provided in the package. Follow these steps carefully:

1. Attach Anti-Slip Feet to Base: Carefully place the tempered glass base (B) on a soft, clean surface. Attach the four anti-slip feet (F) to the designated spots on the underside of the glass base.
2. Assemble Base Support Plate: Secure the base support plate (E) to the tempered glass base (B) using the provided screws and the hex key. Ensure it is centered and tightened securely.
3. Attach Main Support Column: Connect the main support column (A) to the base support plate (E) using the appropriate screws. Ensure the column is upright and firmly attached.
4. Pasang Pelat VESA: Attach the VESA plate (D) to the top of the main support column (A) using the provided screws.
5. Pasangkeun Braket Pemasangan TV kana TV: Identify the correct screws, washers, and spacers from the hardware kit (H) that fit your television's VESA mounting holes. Attach the two TV mounting brackets (C) to the back of your television. Ensure the brackets are level and securely fastened.
6. Pasang TV dina Panggung: Carefully lift your television and hook the TV mounting brackets (C) onto the VESA plate (D) on the stand. Ensure the TV is properly seated and engaged with the safety lock mechanism.
7. TV anu aman: Use the safety screws or clips to secure the TV mounting brackets to the VESA plate, preventing accidental dislodgement.
8. Manajemén Kabel: Route your TV cables through the hollow central column and secure them with the cable management clips (G) for a tidy appearance.

Image: Diagram illustrating VESA mounting patterns (200x100mm to 600x400mm) and overall dimensions of the stand, confirming compatibility for 37-65 inch TVs up to 40kg.

Parentah Operasi

adjustment jangkungna

The ATUMTEK ATMS050 TV stand offers multiple height adjustment levels to optimize your viewing experience. The TV mounting brackets can be positioned at 3 different height levels on the main support column. To adjust the height:

1. Carefully remove the TV from the VESA plate.
2. Adjust the position of the TV mounting brackets (C) on the VESA plate (D) to your desired height level.
3. Re-mount the TV onto the stand, ensuring it is securely hooked and the safety lock is engaged.

Fungsi Swivel

The stand features a swivel mechanism allowing you to adjust the viewing angle. You can pivot your television up to 30 degrees to the left or right.

• Gently grasp the sides of your television.
• Carefully rotate the TV to the desired left or right angle. The stand's pivot mechanism is designed for smooth movement.

Image: Illustration demonstrating the 30-degree swivel capability and the three available height adjustment levels for the TV mounting brackets.

Pangropéa

• beberesih: Anggo lawon anu lemes sareng garing pikeun ngusap stand. Pikeun tanda anu bandel, radaamp lawon anu dieusi sabun hampang tiasa dianggo, teras dikeringkeun tuntas. Hindarkeun pembersih atanapi pelarut anu abrasif.
• Pamariksaan: Periodically inspect all connections and screws to ensure they remain tight. Re-tighten if necessary.
• Perawatan Kaca: The tempered glass base is durable, but avoid dropping heavy objects on it or subjecting it to sharp impacts.

Pamérésan masalah

Issue: TV is not stable or wobbles.

Solusi:

• Pastikeun sadaya screws assembly pinuh tightened.
• Verify the stand is placed on a flat, level, and stable surface.
• Check that the TV's weight and size are within the specified limits (max 40kg, 37-65 inches).
• Confirm the anti-slip feet are properly attached to the base.

Issue: TV does not fit the mounting brackets.

Solusi:

• Check your TV's VESA mounting pattern. It must be between 200x100mm and 600x400mm.
• Ensure you are using the correct screws, washers, and spacers from the hardware kit for your specific TV model.

Issue: Cables are messy.

Solusi:

• Utilize the integrated cable management system by routing cables through the hollow central column and securing them with the provided clips.

spésifikasi

Garansi sareng Rojongan

ATUMTEK provides a Garansi 3 taun tanpa rasa hariwang against manufacturer defects for this product. This warranty covers defects in materials and workmanship under normal use.

For technical support, warranty claims, or any questions regarding your ATUMTEK ATMS050 Universal TV Stand, please contact ATUMTEK customer service. Refer to the product packaging or the official ATUMTEK websitus pikeun inpo kontak panganyarna.

Mangga tahan bukti pameseran Anjeun pikeun layanan jaminan.