NOCO Genius GENPRO10X1

1. Produk Langkungview

The NOCO GENPRO10X1 is a fully-sealed, waterproof onboard battery charger designed for a single 12-volt battery, delivering 10 amps. It is suitable for charging and maintaining various battery types, including lead-acid (flooded, AGM, gel) and lithium-ion (LiFePO₄) batteries. This re-engineered charger is 27% smaller and offers 19% more power than its predecessor, making it a compact and powerful solution for marine and outdoor environments.

2. Eusi Paket

• GENPRO10X1 10A 1-Bank Smart Waterproof Onboard Marine Battery Charger and Battery Maintainer (120-240VAC)
• Onboard Marine Battery Charger User Guide
• (2) Black Truss-Head Screws

3. Fitur konci

• Kompak sareng Kuat: 41% smaller and 33% more powerful than the GEN1, engineered for harsh marine environments.
• Single Bank Charging: Dipeunteun dina 10 amps for a single 12V battery, ideal for marine, boat, starter, and deep-cycle systems.
• Versatile Charging Modes: Selectable modes for 12V, 12V AGM, 12V Lithium, and 12V Repair Mode, allowing precise charging for various battery chemistries.
• Precision Charging: Integrated thermal sensor automatically adjusts charging based on ambient temperature to prevent overcharging or undercharging.
• Dead Battery Recovery: Can charge batteries as low as 1 volt, with a Force Mode to manually initiate charging for deeply discharged batteries down to zero volts.
• Redefined Mounting: Simplified system for fast, secure installation in any orientation, featuring an anti-vibration backing.
• Desain waterproof: Fully-sealed, IP68 rated for waterproof protection, tested to withstand thousands of hours underwater.
• Operasi otomatis: Provides year-round, all-season, all-weather charging with zero overcharge, automatically returning to its last selected mode.

4. Setup jeung Instalasi

The GENPRO10X1 is designed for easy and secure installation. It includes 72-inch DC cables with 3/8-inch eyelets and a 72-inch AC cable (Type-B). The redesigned mounting system allows for installation in any orientation, including upside down, and features an anti-vibration backing to minimize shock and noise.

1. Pilih Lokasi Pasang: Select a secure, dry location within your marine vessel or vehicle. The charger's IP68 rating ensures protection against water, but proper ventilation is always recommended.
2. Amankeun Pangisi Daya: Use the two included truss-head screws to firmly mount the charger. The anti-vibration backing helps to isolate shock and noise.
3. Nyambung ka Batré: Attach the 3/8-inch eyelets of the DC cables to your 12V battery terminals. Ensure correct polarity: red to positive (+), black to negative (-).
4. Nyambung ka Daya AC: Plug the Type-B AC cable into a standard 120-240VAC outlet.

Katerangan Gambar: The NOCO Genius GENPRO10X1 charger is shown installed in a boat's battery compartment, connected to a deep cycle battery. This illustrates the compact size and on-board installation capability.

Katerangan Gambar: The NOCO Genius GENPRO10X1 charger is depicted being splashed with water, emphasizing its IP68 waterproof rating and suitability for marine environments.

5. Parentah Operasi

The GENPRO10X1 features selectable charging modes to optimize performance for nearly any battery chemistry or condition. The charger automatically detects ambient temperature and adjusts the charge cycle accordingly.

1. Daya Hurung: Once connected to the battery and AC power, the charger will automatically begin its diagnostic and charging process.
2. Pilih Charging Mode: Pencét tombol 'MODE' pikeun ngagulung mode ngecas anu sayogi:
   • 12v: Pikeun sél baseuh 12V, gél, ditingkatkeun banjir, bébas pangropéa, sareng batré kalsium.
   • 12V AGM: Pikeun batré 12V AGM.
   • 12V Lithium: For 12V lithium-ion batteries (LiFePO₄) with Battery Management Systems (BMS).
   • 12V Repair Mode: Used to repair old, idle, damaged, stratified, or sulfated 12V lead-acid batteries.
3. Force Mode (for Dead Batteries): For batteries as low as zero volts, press and hold the 'MODE' button for approximately three (3) seconds to activate Force Mode. This allows manual charging to begin.
4. Indikator ngecas: The charger features LED indicators to show the charging status and battery health. A solid green light indicates a fully charged battery.

Katerangan Gambar: An illustration detailing the various advanced charging modes available on the NOCO Genius GENPRO10X1, including 12V, 12V AGM, 12V Lithium, Repair Mode, and Force Mode, with descriptions of their applications.

Katerangan Gambar: A hand is shown pressing the 'MODE' button on the NOCO Genius GENPRO10X1 charger, demonstrating the activation of Force Mode to charge a deeply discharged battery, with a multimeter showing zero volts.

6. Pangropéa

The GENPRO10X1 is designed to be a battery maintainer, ensuring optimal battery health over extended periods. It provides all-season, all-weather charging and automatically prevents overcharging. Simply leave it plugged in to keep your battery topped off and extend its lifespan.

• Rutin mariksa carjer sareng kabel upami aya tanda-tanda karusakan.
• Keep the charger clean and free from debris.
• Ensure proper ventilation around the charger, even though it is sealed.

Katerangan Gambar: The NOCO Genius GENPRO10X1 is shown connected to a battery, illustrating its completely automatic, worry-free charging capabilities, including year-round charging, zero overcharge, and auto memory.

7. Cara ngungkulan

If you encounter issues with your GENPRO10X1 charger, please refer to the detailed user guide included in the package. Common issues and their solutions are typically covered there. Ensure all connections are secure and the correct charging mode is selected for your battery type.

8. Spésifikasi

9. Garansi jeung Rojongan

The NOCO GENPRO10X1 is backed by a garansi 3 taun. For support or warranty claims, please refer to the contact information provided in your user guide or visit the official NOCO website. The product is engineered in the USA.