JIARUIXIN JR1858RXS

JIARUIXIN JR1858RXS 2.4G Bluetooth Remote Control and Receiver Kit User Manual

Model: JR1858RXS

Bubuka

This manual provides detailed instructions for the installation, operation, and maintenance of the JIARUIXIN JR1858RXS 2.4G Bluetooth Remote Control and Receiver Kit. This kit is designed as a replacement part for children's electric ride-on cars. Please read this manual thoroughly before use to ensure proper function and safety.

Eusi pakét

  • 1 x JR1858RXS Control Box
  • 1 x 2.4G Bluetooth Remote Control

Cék kasaluyuan

Before installation, it is crucial to verify that this control box is compatible with your child's electric ride-on car. To do this:

  1. Open the existing control box compartment on your electric ride-on car.
  2. Compare the appearance and connector type of your original control box with the JR1858RXS control box shown in this manual.
  3. Ensure the original control box is also a 5-pin type, as indicated by the "5P" designation for this model.
JR1858RXS Control Box with 5-pin connector highlighted

Image: JR1858RXS Control Box. This image displays the JR1858RXS control box, highlighting the 5-pin connector for compatibility verification with existing ride-on car systems.

Setup sareng Instalasi

Masang Batre Jauh Jauh

The remote control requires two AAA (1.5V) batteries (not included). Follow these steps to install them:

  1. Panggihan kompartemen batré dina tonggong kadali jauh.
  2. Paké obeng pikeun loosen screw nu ngamankeun panutup batré.
  3. Selapkeun dua batré AAA, mastikeun polaritasna bener (+/-).
  4. Ganti tutup batréna sareng kencengkeun sekrup.
Remote control battery installation diagram

Image: Remote Control Battery Installation. This diagram illustrates how to open the battery compartment, insert two AAA batteries, and secure the cover on the remote control unit.

Pamasangan Box Control

Replace the old control box with the new JR1858RXS control box. Ensure all connections are secure and match the original wiring configuration.

Parentah Operasi

Pairing the Remote Control (Frequency Matching)

The remote control must be paired with the control box for the first use or after replacing the remote control batteries. Follow these steps:

  1. Ensure the remote controller has two AAA batteries installed.
  2. Turn off the power switch on the electric ride-on vehicle.
  3. On the remote control, hold down the "▲" (Forward) and "▼" (Backward) keys simultaneously for 3 seconds to initiate the pairing process. The red indicator light on the remote will begin to flicker.
  4. While the remote's indicator light is flickering, turn on the power switch on the electric ride-on vehicle.
  5. The red indicator light on the remote control will stop flickering, indicating that the pairing (code matching) was successful.
JR1858RXS Control Box and Remote Control

Image: JR1858RXS Control Box and Remote Control. This image shows both the JR1858RXS control box and the accompanying 2.4G Bluetooth remote control, ready for pairing and operation.

Fungsi Remote Control

  • "S" Key: adjustment speed.
    • 1 LED lit: Low speed
    • 2 LEDs lit: Medium speed
    • 3 LEDs lit: High speed
  • "▲" Key: Forward movement.
  • "▼" Key: Backward movement.
  • "◀" Key: Turn Left.
  • "▶" Key: Turn Right.
  • "P" Key: Brake. Hold this key to apply the brake. All LED indicators will flicker when the brake is engaged.

Pangropéa

  • Keep the control box and remote control dry and clean.
  • Avoid exposing the components to extreme temperatures or direct sunlight.
  • Regularly check battery compartments for corrosion. Remove batteries if the remote control will not be used for an extended period.
  • Pastikeun sadaya sambungan listrik tetep aman.

Pamérésan masalah

MasalahMungkin Cukang lantarananaSolusi
Kadali jauh teu ngabales.
  • Low or dead batteries in remote.
  • Remote not paired with control box.
  • Gangguan ti alat 2.4G anu sanés.
  • Ganti batré kadali jauh.
  • Perform frequency matching (pairing) as described in "Operating Instructions".
  • Jauhan ti alat 2.4G anu sanés.
Vehicle does not move or moves erratically.
  • Loose connection to control box.
  • Control box malfunction.
  • Vehicle battery low.
  • Check all wiring connections to the control box.
  • Ensure the control box is correctly installed.
  • Charge the ride-on car's main battery.

spésifikasi

  • model: JR1858RXS
  • Voltage: DC 12V
  • Beban Ayeuna: Max 20A
  • Métode kontrol: 2.4G Bluetooth
  • Frékuénsi: 2.405GHz - 2.485GHz
  • Batré Remote Control: 2 x AAA 1.5V (teu kalebet)
  • Ukuran produk: 4.6 x 2.9 x 1.9 inches (Control Box)
  • Beurat barang: 6.4 ounces (Control Box)
  • Pabrikan: JIARUIXIN

Émbaran Kasalametan penting

  • This product is a replacement part and should be installed by an adult or under adult supervision.
  • Ensure the electric ride-on car is turned off and disconnected from its power source before installing or replacing components.
  • Salawasna nganggo vol benertage and current ratings as specified for your ride-on car.
  • Simpen bagian-bagian alit sareng batréna tebih tina jangkauan barudak leutik pikeun nyegah bahaya kaselek.
  • Do not modify the control box or remote control. Unauthorized modifications can lead to malfunction or injury.
Documents - JIARUIXIN – JR1858RXS

euweuh dokumén relevan