1. Bubuka
This manual provides essential information for the proper installation, operation, and maintenance of your Lowrance Active Imaging 3-In-1 Transducer (Model: 000-14489-001). This transducer is designed to enhance your marine electronics system by providing detailed sonar imaging capabilities. Please read this manual thoroughly before installation and use.
2. Émbaran Kasalametan
Perhatikeun pancegahan kaamanan di handap ieu pikeun nyegah tatu sareng karusakan alat:
- Always disconnect power to the marine electronics system before installing or servicing the transducer.
- Ensure all connections are secure and waterproof to prevent electrical shorts or corrosion.
- Mount the transducer in a location where it will not interfere with boat operation or pose a hazard to swimmers.
- Avoid exposing the transducer to extreme temperatures or harsh chemicals.
3. Eusi Paket
Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan:
- Lowrance Active Imaging 3-In-1 Transducer
- Transom Mount Bracket
- Pemasangan Hardware (screws, washers, mur)
- Citakan Instalasi (upami kalebet)
4. Setup jeung Instalasi
The Lowrance Active Imaging 3-In-1 Transducer is designed for transom mounting. Proper placement is crucial for optimal performance.
4.1 Lokasi Pamasangan
Select a location on the transom that is:
- Free from obstructions (e.g., propellers, strakes, other transducers).
- In an area of smooth water flow, minimizing turbulence.
- Accessible for installation and maintenance.
4.2 Instalasi fisik
- Position the transom mount bracket on the selected location. Ensure the bottom of the transducer will be slightly below the hull line when deployed.
- Mark the drill holes using the bracket as a template.
- Drill pilot holes. Apply marine sealant to prevent water intrusion.
- Secure the transom mount bracket to the boat using the provided mounting hardware.
- Attach the transducer to the bracket. Adjust the angle so the transducer face is parallel to the waterline.
Gambar 1: Angled view of the Lowrance Active Imaging 3-In-1 Transducer with its transom mount bracket.
Gambar 2: Samping view of the transducer, illustrating its profile and mounting position.
Gambar 3: Handapeun view of the transducer, showing the sonar elements.
4.3 Sambungan Listrik
Route the transducer cable to your compatible Lowrance display unit (e.g., HDS LIVE, HDS Carbon, Elite Ti2). The transducer features a 9-Pin connection. Ensure the connector is fully seated and the locking collar is tightened to create a waterproof seal.
5. Parentah Operasi
The Active Imaging 3-In-1 Transducer combines multiple sonar technologies to provide a comprehensive view tina lingkungan handapeun cai.
5.1 Sonar Frequencies and Modes
- Med/High CHIRP: Provides traditional sonar views for fish arches and bottom tracking.
- SideScan: Offers wide, high-resolution views of structure and fish to the sides of your boat.
- DownScan: Delivers picture-like views of structure and fish directly below your boat.
Refer to your Lowrance display unit's manual for detailed instructions on selecting and optimizing these sonar modes.
6. Pangropéa
Regular maintenance ensures optimal performance and longevity of your transducer.
- beberesih: Periodically clean the transducer face with mild soap and water to remove marine growth, dirt, or oil. Avoid abrasive cleaners or solvents.
- Pamariksaan: Regularly inspect the transducer cable for cuts, kinks, or damage. Check the mounting bracket for looseness or corrosion.
- Winterization: Upami beroperasi dina kaayaan katirisan, pastikeun transduser henteu kakeunaan formasi és, anu tiasa nyababkeun karusakan.
7. Cara ngungkulan
If you experience issues with your transducer, consider the following common problems and solutions:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Teu Aya Pamacaan Sonar | Loose connection, power issue, transducer not submerged. | Check cable connections, verify power to display unit, ensure transducer is in water. |
| Poor or Intermittent Imaging | Air bubbles, marine growth, incorrect mounting angle, electrical interference. | Clean transducer face, adjust mounting angle, check for sources of electrical noise, reposition transducer if necessary. |
| SideScan/DownScan Not Working | Incorrect display unit settings, damaged transducer element. | Verify sonar settings on your display unit. If problem persists, contact support. |
For persistent issues, consult your Lowrance display unit's manual or contact Lowrance customer support.
8. Spésifikasi
- model: 000-14489-001
- Tipe: Active Imaging 3-In-1 Transducer
- Frékuénsi: Med/High CHIRP, SideScan, DownScan
- Sambungan: 9-pin
- Tipe Pamasangan: Gunung Transom
- ukuran: Kira-kira 8 x 6 x 4 inci (20.3 x 15.2 x 10.2 cm)
- beurat: Kira-kira 3.66 pon (1.66 kg)
- Unit cocog: HDS LIVE, HDS Carbon, Elite Ti2 series
9. Garansi jeung Rojongan
This Lowrance Active Imaging 3-In-1 Transducer (Model: 000-14489-001) is covered by a 90 poé jaminan kawates ti tanggal beuli. Garansi ieu nyertakeun cacad dina bahan sareng pagawean dina panggunaan normal.
For warranty claims, technical support, or further assistance, please refer to the official Lowrance websitus atanapi ngahubungan departemén layanan palanggan maranéhna. Simpen bukti pameseran anjeun pikeun validasi jaminan.
