1. Bubuka
The Lenox 8-In-1 Ratcheting Screwdriver is a versatile hand tool designed for various fastening applications. It features a multi-bit design with integrated storage and a ratcheting mechanism to enhance efficiency and reduce wrist strain during use. This manual provides detailed instructions to ensure proper and safe operation of your tool.
Image 1: The Lenox 8-In-1 Ratcheting Screwdriver, showcasing its compact design and blue and white handle.
2. Fitur Produk
- 3-Way Ratcheting Mechanism: Allows for forward, reverse, and locked positions, enabling continuous turning without repositioning the wrist.
- Panyimpenan Mata Bit Dina Gagang: Conveniently stores multiple double-ended bits within the screwdriver handle for quick access.
- Tip Magnét: Securely holds bits and fasteners in place during operation.
- Integrated Nut Drivers: Shaft openings function as 1/4'', 5/16'', and 3/8'' nut drivers.
- Konstruksi awét: Designed for longevity and reliable performance.
3. Eusi Paket
Pastikeun yén sadaya item anu didaptarkeun di handap kalebet kana pakét anjeun:
- Lenox 8-In-1 Ratcheting Screwdriver Handle
- Double-ended bit (Slotted 8-10 / Phillips #2)
- Double-ended bit (Torx T25 / Square #2)
- Single-ended bit (Phillips #1)
4. Setelan sareng Pamasangan Bit
- Pilih Bit:
- The screwdriver comes with bits stored within the handle. To access them, pull the shaft out from the handle.
- The first double-ended bit (Slotted 8-10 / Phillips #2) is located at the end of the shaft.
- To find the second double-ended bit (Torx T25 / Square #2) and the single-ended Phillips #1 bit, remove the first double-ended bit and then pull out the inner sleeve from the shaft.
- Choose the appropriate bit for your task. If using a double-ended bit, ensure the desired tip is exposed.
- Nyelapkeun Bit: Insert the chosen bit firmly into the magnetic tip of the screwdriver shaft. The magnetic tip will hold the bit securely.
- Reassembling the Screwdriver: Once the bit is installed, reinsert the shaft into the handle until it clicks into place.
Image 2: The screwdriver with a bit extended, ready for use. This view highlights the shaft and bit.
5. Parentah Operasi
- Adjusting the Ratchet: Locate the ratcheting selector switch on the screwdriver handle.
- Mindahkeun saklar kana ditinggalkeun for clockwise (tightening) rotation.
- Mindahkeun saklar kana leres for counter-clockwise (loosening) rotation.
- Posisikeun saklar dina puseur for a locked, non-ratcheting operation.
- Ngagunakeun Obeng:
- Place the selected bit into the head of the fastener.
- Apply firm, steady pressure to the handle while turning. The ratcheting mechanism will allow the handle to turn freely in one direction while engaging the bit in the other, reducing the need to reposition your grip.
- Ensure the bit is fully seated in the fastener head to prevent stripping.
- Using as a Nut Driver:
- To use the integrated nut drivers, remove the bit from the shaft.
- The shaft itself has three different sized openings that function as 1/4'', 5/16'', and 3/8'' nut drivers.
- Select the appropriate opening and place it over the nut or bolt head.
- Turn the handle to tighten or loosen the fastener, utilizing the ratcheting function as needed.
Image 3: A user operating the screwdriver to fasten components, demonstrating its practical application.
6. Pangropéa
- beberesih: Wipe the screwdriver clean with a dry cloth after each use. Avoid using harsh chemicals or abrasive cleaners.
- Panyimpenan: Store the screwdriver in a dry environment to prevent rust and corrosion. Ensure all bits are securely stored within the handle.
- Pamariksaan: Periodically inspect the bits and the ratcheting mechanism for wear or damage. Replace worn bits as necessary.
7. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Bit slips atawa strips sirah fastener. | Incorrect bit size, worn bit, insufficient pressure, or incorrect ratcheting direction. | Ensure correct bit size is used. Replace worn bits. Apply firm, consistent pressure. Verify ratcheting direction. |
| Ratcheting mechanism not engaging. | Selector switch in locked position or mechanism is dirty/damaged. | Check selector switch position. Clean mechanism if accessible. If damaged, contact support. |
| Bits not holding securely in shaft. | Magnetic tip is weak or bit is not fully inserted. | Ensure bit is fully inserted. If magnetic tip is weak, contact support. |
8. Spésifikasi
| Nomer modél | LXHT60902 |
| Item Beurat | 13 ons (kira-kira 368 gram) |
| Dimensi produk | 11.91 x 1 x 1.38 inci (kira-kira 30.25 x 2.54 x 3.5 cm) |
| Kaasup Jenis Bit | Phillips (#1, #2), Slotted (8-10), Torx (T25), Square (#2) |
| Integrated Nut Driver Sizes | 1/4'', 5/16'', 3/8'' |
| Fitur husus | 3-Way Ratcheting, Magnetic Tip, In-Handle Storage |
| Bahan | Blend (as per manufacturer) |
| Sumber Daya | Hand-Powered |
9. Émbaran jaminan
The Lenox 8-In-1 Ratcheting Screwdriver Model LXHT60902 is backed by a Garansi Saumur Hirup Pinuh. For details regarding warranty claims or service, please refer to the official Lenox websitus atanapi ngahubungan rojongan customer maranéhanana.
10. Rojongan
For further assistance, technical support, or to inquire about replacement parts, please visit the official Lenox websitus atanapi ngahubungan departemén layanan palanggan maranéhna. Inpormasi kontak biasana tiasa dipendakan dina bungkusan produk atanapi produsén websitus.
Official Lenox Websitus: www.lenoxtools.com
