Brook Xone SE Adapter Instruction Manual

1. Produk Langkungview

The Brook Xone SE Adapter (Type-C Version) is designed to enhance your gaming experience by allowing Xbox One Elite Series 2 and Xbox Series X/S controllers to be used across multiple platforms, including Xbox Series X/S, Nintendo Switch, PlayStation 4, and PC (XID, Steam). This adapter integrates seamlessly, providing features such as motion control, turbo function, button remapping, and audio support.

Figure 1: Brook Xone SE Adapter (Type-C Version) and retail packaging.

Hareupeun view of the Brook Xone SE Adapter

Gambar 2: Hareupeun view of the Xone SE Adapter, showing the function buttons and Brook branding.

Samping view of the Brook Xone SE Adapter

Gambar 3: Sisi view of the Xone SE Adapter, highlighting its compact design.

2. Setup jeung Instalasi

Follow these steps to properly set up your Brook Xone SE Adapter with your controller and gaming console.

2.1 Attaching the Adapter to Your Controller

Ensure your Xbox One Elite Series 2 or Xbox Series X/S controller is powered off.
Align the Type-C connector of the Xone SE Adapter with the USB-C port on your controller.
Gently push the adapter firmly into the controller's port until it is securely seated. Ensure the 3.5mm audio jack on the adapter also aligns with the controller's audio port.

Brook Xone SE Adapter attached to an Xbox controller

Figure 4: The Xone SE Adapter securely attached to an Xbox controller, ready for use.

Video 1: Demonstrates how to ensure the adapter is fully inserted into your controller for proper connection.

2.2 Initial Connection to Consoles/PC

The adapter supports various platforms. The connection method may vary slightly depending on the target system.

Nintendo Pindah:
1. Switch the toggle switch button on the adapter to "NS" mode.
2. Wake up the controller and press and hold the "Bluetooth" button on the Xone SE Adapter for 2 seconds.
3. The LED on the adapter will blink red and blue alternately. Wait for a few seconds until the LED turns blue, indicating a successful connection.
Video 2: Guide on wirelessly connecting the Xone SE Adapter to a Nintendo Switch.
Video 3: Guide on wired connection of the Xone SE Adapter to a Nintendo Switch.
PlayStation 4:
1. Switch the toggle switch button on the adapter to "PS4" mode.
2. Connect the adapter to your PS4 via a USB cable (not included) or follow wireless pairing instructions if applicable.
3. Compatible PS4 games are playable on PS5 consoles. PS5-specific games are not supported.
PC (XID, Steam):
1. Connect the adapter to your PC via a USB cable. The system should recognize it as an XID device.
2. For Steam, ensure your controller settings are configured to recognize the connected device.
Xbox Series X/S & Xbox One:
1. The adapter allows your Xbox controllers to connect to these consoles. Ensure the adapter is properly attached to the controller.

3. Parentah jeung Fitur Operasi

The Xone SE Adapter provides several advanced functions to enhance your gameplay.

3.1 Kontrol gerak

The adapter supports motion control for PlayStation 4 and Nintendo Switch games, adding an immersive layer to your gaming experience.

Xbox controller with Xone SE Adapter demonstrating motion control

Figure 5: Motion control functionality enabled by the Xone SE Adapter on compatible consoles.

Video 4: Official trailer showcasing the features of the Brook Xone Adapter SE, including motion control.

3.2 Turbo and Remap Functions

The adapter allows for easy setup of Turbo and Remap functions for PS4, Switch, and PC, providing customizable control options.

Fungsi Turbo: Press the dedicated Turbo button on the adapter to activate or adjust the turbo speed.
Fungsi Remap: Use the Remap button to reassign controller inputs. Refer to the specific instructions on the Brook website for detailed remapping procedures.
Button Hold Function: This feature allows a button to be held down automatically.

Close-up of Xone SE Adapter buttons for Turbo and Remap

Figure 6: The function buttons on the Xone SE Adapter for activating Turbo and Remap features.

Video 5: Demonstrates how to set up and cancel remap functions on the Xone SE Adapter.

3.3 Fungsi Audio

The 3.5mm microphone headset jack on the adapter supports audio for PS4 and Xbox One consoles, allowing you to use your preferred headset.

Video 6: Illustrates the use of the simulated touchpad function on the Xone SE Adapter.

3.4 Emulate PS4 Touch Pad

The adapter can emulate the PS4 touchpad via a dedicated Function Key, providing full compatibility with PS4 games.

4. Pangropéa

To ensure the longevity and optimal performance of your Xone SE Adapter, please follow these maintenance guidelines:

beberesih: Use a soft, dry cloth to clean the adapter. Avoid using harsh chemicals or abrasive materials.
Panyimpenan: Simpen adaptor di tempat anu tiis sareng garing jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
Penanganan: Nanganan adaptor kalayan ati-ati. Hindarkeun lungsurna atanapi nahan kana dampak anu kuat.
Pembaruan firmware: Pariksa sacara rutin Brook resmi website for firmware updates. Updates can improve compatibility, add new features, and resolve potential issues. It is recommended to update the firmware before initial use.

5. Cara ngungkulan

If you encounter any issues with your Xone SE Adapter, please refer to the following common troubleshooting steps:

Masalah	Mungkin Cukang lantaranana	Solusi
Adapter not recognized by console/PC.	Incorrect mode selected, loose connection, outdated firmware.	Ensure the toggle switch is set to the correct console mode (NS/PS4). Verify the adapter is fully and securely inserted into the controller. Check for and install the latest firmware from the Brook websitus. Cobi port USB atanapi kabel anu béda upami nganggo sambungan kabel.
Motion control not working or inaccurate.	Not supported on current platform, calibration needed, interference.	Confirm motion control is supported on your specific console (PS4/Switch). Perform a motion control calibration if available (check Brook website for instructions). Ensure no strong magnetic fields or electronic interference are nearby.
Audio not working through headset.	Headset not fully plugged in, incorrect audio settings, not supported on platform.	Ensure the 3.5mm headset jack is fully inserted into the adapter. Verify audio settings on your console/PC are configured for the connected headset. Confirm audio function is supported on your specific console (PS4/Xbox One).
Kontroler sering pegat sambungan.	Low controller battery, wireless interference, adapter not fully seated.	Charge your controller's battery. Minimize wireless interference by moving closer to the console or removing other wireless devices. Re-seat the adapter firmly into the controller. Update adapter firmware.

6. Spésifikasi

model: X one SE Adapter - Type C Version
merek: Brook
Controllers cocog: Xbox One Elite Series 2, Xbox Series X/S Controllers
Platform anu cocog: Xbox Series X/S, Nintendo Switch, PlayStation 4, PC (XID, Steam), Xbox One
Konektipitas: USB-C (to controller), Wireless (Bluetooth)
Fitur: Motion Control (PS4/Switch), Turbo, Remap, Button Hold, Audio Function (3.5mm headset for PS4/Xbox One), PS4 Touchpad Emulation
ukuran: 2.36 x 1.77 x 0.79 inci
beurat: 2.12 ons
warna: Hideung
Negara asal: Taiwan

7. Garansi jeung Rojongan

Kanggo inpormasi garansi, dukungan téknis, sareng apdet firmware pangénggalna, mangga buka situs wéb resmi Brook websitus:

Brook Official Websitus

You can also refer to the official User Manual PDF provided by the manufacturer for additional details:

Unduh Buku Panduan Pamaké (PDF)

	Brook Wingman XB Converter: Connect Xbox, PlayStation, Switch Controllers to Xbox Consoles The Brook Wingman XB Converter allows users to connect various controllers (Xbox, PlayStation, Switch) to Xbox consoles. Features include Turbo function, button remapping, and LED status indicators for easy operation.
	Pituduh Pangguna Brook Wingman NS Lite Converter Pituduh ieu nyayogikeun pitunjuk pikeun nganggo Brook Wingman NS Lite Converter, adaptor kontroler nirkabel pikeun Nintendo Switch, Switch OLED, Switch Lite, sareng PC. Éta ngajelaskeun léngkah-léngkah konéksi, indikator LED, pasangan nirkabel, sareng fitur-fitur canggih sapertos setélan Turbo sareng Button Remap pikeun rupa-rupa kontroler kalebet Xbox, PlayStation, sareng Switch Pro.
	Brook Wingman PS2 Parabot Parobah Manual Pamaké Buku pituduh lengkep pikeun Brook Wingman PS2 Converter, ngajéntrékeun sambungan, tampilan LED, pemetaan tombol, fungsi turbo, pemetaan ulang, sareng pangalihan modeu input pikeun rupa-rupa konsol gim sareng kontroler.
	Pituduh Pangguna Konverter Brook Wingman XE 2 Pituduh pangguna pikeun Brook Wingman XE 2, adaptor konverter controller anu cocog sareng PlayStation, Nintendo Switch, sareng PC. Diajar ngeunaan setelan, apdet firmware, Turbo, sareng fungsi Remap.
	Brook X One Adapter: Sambungkeun Xbox One Controller ka PS4, Switch, sareng PC Pituduh komprehensif pikeun Brook X One Adapter, ngamungkinkeun pangendali Xbox One dina PlayStation 4, Nintendo Switch, sareng PC. Fitur parentah setelan, switching mode, fungsionalitas turbo, remapping tombol, sarta spésifikasi teknis.
	Brook XB Pajoang Board Guide pamaké: sambungan, Fitur, sarta kasaluyuan konsol Manual pamaké lengkep pikeun Brook XB Fighting Board, ngawengku setelan, wiring, fungsi tombol, setelan turbo, modeu SOCD, sarta kasaluyuan jeung Xbox Original, Xbox 360, Xbox One, jeung konsol Xbox Series.

Brook X one SE Adapter - Type C Version