Einhell Cordless Impact Drill TE-ID 18 Li Solo Power X-Change User Manual

1. Bubuka

This manual provides essential information for the safe and efficient operation of your Einhell Cordless Impact Drill TE-ID 18 Li Solo. This tool is a high-performance member of the Einhell Power X-Change family, designed for drilling and impact drilling tasks. Please read these instructions carefully before first use and keep them for future reference.

Figure 1: Einhell Cordless Impact Drill TE-ID 18 Li Solo. This image shows the main drill unit with an auxiliary handle and depth stop installed, ready for use. A battery is shown faded in the background, indicating it is not included.

2. Pitunjuk Kasalametan Umum

Always observe the following safety precautions when using power tools to reduce the risk of electric shock, fire, and serious injury.

• Kasalametan Area Gawé: Jaga wewengkon gawé anjeun beresih jeung cahayana alus. Wewengkon nu pabalatak atawa poek ngondang kacilakaan. Ulah ngajalankeun parabot kakuatan dina atmosfir ngabeledug, kayaning ku ayana cair kaduruk, gas, atawa lebu.
• Kasalametan listrik: Hindarkeun kontak awak sareng permukaan bumi atanapi grounded sapertos pipa, radiator, rentang, sareng kulkas. Aya ngaronjat résiko shock listrik lamun awak anjeun earthed atawa grounded.
• Kasalametan Pribadi: Always wear eye protection. Use hearing protection when operating impact drills. Wear a dust mask if drilling generates dust. Dress properly; avoid loose clothing or jewelry.
• Pamakéan sareng Perawatan Alat: Ulah maksakeun alat kakuatan. Anggo alat kakuatan anu leres pikeun aplikasi anjeun. Pegatkeun sambungan batré tina alat kakuatan samemeh nyieun sagala pangaluyuan, ngaganti asesoris, atawa nyimpen parabot kakuatan.
• Pamakéan sareng Perawatan Alat Batré: Ngecas ukur nganggo carjer anu ditunjuk ku produsén. Anggo alat-alat listrik ngan nganggo bungkus batré anu ditunjuk sacara khusus.

3. Komponén produk

Familiarize yourself with the various parts of your Einhell Cordless Impact Drill for proper and safe operation.

• Chuck tanpa konci: Pikeun parobahan bit gancang jeung gampang.
• Saklar Pamilih Mode: To switch between drilling and impact drilling.
• Speed Control Trigger: For variable speed adjustment.
• Saklar Maju/Mundur: Pikeun ngarobah arah rotasi.
• Gagang bantu: Nyadiakeun cengkraman sareng kontrol tambahan.
• Depth Stop: Pikeun kontrol jero pangeboran tepat.
• Antarmuka batré: For connecting Power X-Change batteries (sold separately).

angka 2: Tutup-up view of the 13 mm quick-change chuck. This component allows for tool-free bit changes.

4. Setélan

4.1 Pamasangan Batré (Batré sareng Pangisi Daya Henteu Kalebet)

The Einhell TE-ID 18 Li Solo is part of the Power X-Change family and requires an 18V Power X-Change battery and charger, which are sold separately. Ensure the battery is fully charged before use.

1. Align the charged Power X-Change battery with the battery interface on the base of the drill.
2. Geser batré kana tempatna nepi ka ngaklik aman.
3. Pikeun ngahapus, pencét tombol leupaskeun dina batré sareng geser kaluar.

Figure 3: Illustration indicating that the battery and charger are not included with the drill unit. These items must be purchased separately as part of the Einhell Power X-Change system.

Gambar 4: Leuwihview of the Einhell Power X-Change system, demonstrating the wide range of compatible tools that can use the same battery. This highlights the modularity of the system.

4.2 Auxiliary Handle and Depth Stop Installation

1. Leupaskeun gagang bantu ku cara muterkeunana sabalikna jarum jam.
2. Geserkeun gagangna kana bagian hareup awak bor.
3. Insert the depth stop into the designated hole on the auxiliary handle.
4. Adjust the auxiliary handle to a comfortable position and tighten it by rotating clockwise.
5. Adjust the depth stop to the desired drilling depth by sliding it in or out.

4.3 Masang Bor Bits

1. Pastikeun borna dipareuman sareng batréna dicabut pikeun kaamanan.
2. Puterkeun cuk counter-jarum jam pikeun muka rahang.
3. Selapkeun bit bor pinuh kana cuk nu.
4. Rotate the chuck clockwise to securely tighten the jaws around the drill bit. Ensure the bit is centered and firmly gripped.

5. Parentah Operasi

5.1 Powering on / Pareum tur Speed ​​Control

The drill is activated by pressing the speed control trigger. The speed is variable, increasing with greater pressure on the trigger. To turn off, release the trigger.

Figure 5: Close-up of the drill's trigger and forward/reverse switch. The trigger provides variable speed control, and the switch above it controls the direction of rotation.

5.2 Maju / Ngabalikeun Rotasi

The forward/reverse switch, located above the trigger, controls the direction of rotation. Push it to the left for forward rotation (drilling) and to the right for reverse rotation (removing screws or jammed bits). Ensure the switch is in the central position to lock the trigger for safety when not in use.

5.3 Drilling and Impact Drilling Mode

The mode selector switch allows you to choose between standard drilling and impact drilling. For drilling into wood, metal, or plastic, select the drilling mode (drill bit symbol). For drilling into masonry or concrete, select the impact drilling mode (hammer symbol).

Figure 6: Close-up of the mode selector switch on the top of the drill. The left symbol indicates drilling mode, and the right symbol indicates impact drilling mode.

5.4 Tips pangeboran umum

• Salawasna amankeun benda kerja anjeun.
• Start drilling at a low speed and gradually increase.
• Larapkeun ajeg, malah tekanan. Ulah maksakeun bor.
• Pikeun liang jero, périodik mundur bit pikeun mupus lebu.
• Use appropriate drill bits for the material.

Figure 7: A person demonstrating the use of the Einhell cordless impact drill for drilling into a wall. Proper grip and posture are shown, emphasizing safe operation.

6. Pangropéa

Pangropéa rutin mastikeun umur panjang sareng kinerja bor anjeun anu optimal.

• beberesih: Keep the ventilation slots clean to prevent overheating. Use a soft brush or compressed air to remove dust and debris. Do not use water or chemical cleaners.
• Panyimpenan: Store the drill in a dry, secure place out of reach of children. Remove the battery pack before storage.
• Pangropéa Chuck: Bersihkeun rahang chuck sacara berkala pikeun mastikeun mata bor tiasa dicekel kalayan leres.

7. Cara ngungkulan

8. Spésifikasi Téknis

9. Garansi jeung Rojongan

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Einhell websitus. Simpen bukti pameseran anjeun pikeun klaim garansi.

Einhell Official Websitus: www.einhell.com