Einhell 15-Piece Router Bit Set Instruction Manual

1. Unpacking jeung Inspection

Carefully remove the router bit set from its packaging. Inspect all bits for any signs of damage or manufacturing defects. Ensure all 15 pieces are present as listed in the "Set Contents" section. The bits are stored in a wooden case with labels for easy identification of type, size, and diameter.

Image: The inside lid of the wooden storage case, displaying diagrams and specifications for each router bit, aiding in identification and selection.

2. Pancegahan Kasalametan

• Salawasna nganggo alat pelindung pribadi (PPE) anu cocog, kalebet kacamata kaamanan, panyalindungan dédéngéan, sareng sarung tangan.
• Ensure your electric router is unplugged before changing bits.
• Verify that the router bit is clean and free from debris before insertion.
• Never use damaged or dull router bits.

3. Inserting a Router Bit

1. Select the appropriate router bit for your task.
2. Ensure your electric router is turned off and unplugged.
3. Loosen the collet nut on your router.
4. Insert the router bit shank into the collet. The shank diameter for these bits is 8 mm. Ensure the bit is inserted deep enough to provide maximum grip, typically past the minimum insertion line if present, but not so deep that the cutting flutes touch the collet.
5. Tighten the collet nut securely using the appropriate wrench. Do not overtighten.
6. Confirm the bit is firmly seated and does not wobble.

Catetan: Always refer to your specific electric router's instruction manual for detailed bit installation procedures and safety guidelines.

1. Kasaluyuan Bahan

These router bits are designed for use with various wood types, including hardwood, softwood, chipboard, fiberboard, and plywood. Always test on a scrap piece of the same material before beginning your main project.

2. Router Speed Settings

The maximum permissible speeds for each router bit are indicated directly on the cutter shank. Always adhere to these speed recommendations to ensure safe operation, optimal cutting performance, and bit longevity. Using an incorrect speed can lead to poor cut quality, overheating, or bit damage.

3. Tips pamakéan umum

• Pastikeun workpiece geus aman clampdiedit sateuacan routing.
• Maintain a firm grip on the router and guide it smoothly along the desired path.
• Make multiple shallow passes instead of one deep pass, especially with harder materials or larger bits, to reduce strain on the bit and router, and to achieve a cleaner cut.
• Allow the router bit to reach full speed before engaging with the material.
• Always route in the correct direction (typically against the rotation of the bit) to prevent kickback and ensure control.

Image: A person demonstrating the use of an electric router on a wooden workpiece. This illustrates the typical application of the router bits.

1. beberesih

After each use, clean the router bits to remove resin, pitch, and sawdust buildup. Use a specialized router bit cleaner or a mild solvent and a brush. Avoid using abrasive materials that could damage the carbide tips.

2. Pamariksaan

Regularly inspect the cutting edges for sharpness and any signs of damage, such as chips, cracks, or excessive wear. Dull or damaged bits can lead to poor cut quality, increased heat, and potential safety hazards. Replace damaged bits immediately.

3. Panyimpenan

Store the router bits in their original wooden case when not in use. This protects the delicate cutting edges from damage and keeps the set organized. Store the case in a dry environment to prevent rust or corrosion.