Bellemave House Twin Bed Frame Instruction Manual

1. Bubuka

Thank you for choosing the Bellemave House Twin Bed Frame. This manual provides essential information for the safe assembly, operation, and maintenance of your new bed frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Émbaran Kasalametan

• Always assemble the bed frame on a soft, clean surface to prevent damage.
• Pastikeun sadaya bagian aya sateuacan ngamimitian assembly.
• Do not use power tools for assembly as this may overtighten screws and damage the wood.
• Pariksa sadaya sambungan sacara berkala pikeun mastikeun éta tetep pageuh.
• Tetep bagian leutik jauh ti barudak salila assembly.

2. Eusi Paket

Your Bellemave House Twin Bed Frame is shipped in one package. Carefully unpack all components and verify against the parts list (typically included in the physical manual) to ensure nothing is missing or damaged. Common components include:

• Panel Headboard sareng Footboard
• Rel samping
• Roof frame components
• slats kai
• Hardware pack (screws, bolts, Allen key)

Lamun aya bagian nu leungit atawa ruksak, mangga ngahubungan rojongan customer langsung.

3. Setup jeung Parentah Majelis

Assembly of the Bellemave House Twin Bed Frame requires two adults. Follow the step-by-step instructions provided in your physical manual. The general assembly process involves:

1. Nyiapkeun wewengkon: Kosongkeun tempat anu lega pikeun dirakit. Tata sadaya komponén sareng perangkat kerasna.
2. Nyusun kerangka dasar: Connect the headboard, footboard, and side rails using the provided hardware. Ensure all connections are secure but do not overtighten.
3. Attach the Roof Frame: Assemble the house-shaped roof components and attach them to the main bed frame.
4. Install the Slats: Place the wooden slats across the bed frame. Secure them according to the instructions, typically by screwing them into the side rails. This bed frame does not require a box spring.
5. Panyegelan ahir: Once the entire frame is assembled, carefully go back and tighten all screws and bolts. Do not overtighten to avoid stripping the wood.

Important Note on Assembly:

Some users have reported that pre-drilled holes may not be deep enough or that the provided Allen key may wear out quickly. It is recommended to have a high-quality Allen key available and to ensure screws are fully seated without forcing them. If pre-drilled holes are too shallow, carefully deepen them manually if you have the appropriate tools, or contact customer support.

Pidéo Majelis

4. Parentah Operasi

Once assembled, your Bellemave House Twin Bed Frame is ready for use.

• Penempatan kasur: Place a twin-sized mattress directly onto the wooden slats. A mattress thickness of 8-10 inches is recommended for optimal comfort and fit within the frame.
• Taya Box Spring Diperlukeun: The sturdy wooden slats provide ample support, eliminating the need for a box spring.
• Kapasitas beurat: The bed frame is designed to support a maximum weight of 300 lbs. Do not exceed this limit to ensure safety and product longevity.
• Hiasan: The house-shaped frame can be decorated with lights, fabrics, or other child-safe items to personalize the space.

5. Pangropéa

Proper maintenance will extend the life of your bed frame.

• beberesih: Lap rangka ranjang ku kaén nu lemes,amp lawon. Hindarkeun ngagunakeun bahan kimia anu kasar atanapi pembersih abrasive, anu tiasa ngarusak finish.
• Pariksa Hardware: Periodically (e.g., every 3-6 months) check all bolts and screws to ensure they are tight. Loose hardware can compromise the stability and safety of the bed.
• Hindarkeun Uap kaleuleuwihan: Keep the bed frame away from areas with high humidity or direct exposure to water to prevent wood damage.

6. Cara ngungkulan

Upami anjeun ngalaman masalah sareng rangka ranjang anjeun, tingali solusi umum ieu:

• Suara ngik-ngik: Squeaking often indicates loose connections. Re-tighten all bolts and screws. Ensure the mattress is properly seated on the slats.
• Kasesahan Salila Majelis: If pre-drilled holes seem shallow, ensure you are using the correct screws and applying firm, even pressure. Avoid forcing screws. If issues persist, contact customer support.
• Instabilitas: Ensure all components are correctly aligned and all hardware is fully tightened. Check that the bed is on a level surface.

7. Spésifikasi

8. Garansi jeung Rojongan

Bellemave is committed to providing quality products. For any questions regarding assembly, missing parts, or product defects, please contact Bellemave customer support. Please have your model number (B08P8KBGDS) and purchase information ready when contacting support.

For specific warranty details, please refer to the documentation included with your purchase or visit the official Bellemave websitus.