1. Produk Langkungview
The Einhell Power X-Change 5.2 Ah Battery Twinpack consists of two 18V 5.2 Ah Power X-Change PLUS batteries. These batteries are integral components of the versatile and fully interchangeable Einhell Power X-Change rechargeable battery system. Designed for universal use across all PXC devices, they offer significant cost savings and environmental benefits by allowing a single battery and charger to power multiple tools.
The 18V 5.2 Ah PXC PLUS battery is a high-end model within the Power X-Change family, suitable for TWIN-PACK applications requiring 36V. Its robust housing is engineered to resist dust, corrosion, and mechanical impacts. A protective rubber coating enhances impact resistance and provides a secure grip. A convenient trough handle facilitates easy removal from any tool.
Figure 1: Einhell Power X-Change 5.2 Ah Battery Twinpack. Each battery features a charge indicator with four green LEDs and a robust, ergonomic design.
2. Parentah Kasalametan
Always observe the following safety precautions when handling and using your Einhell Power X-Change batteries:
- Do not expose batteries to heat, direct sunlight, or fire.
- Ulah pondok-circuit terminal batré.
- Ulah ngalelepkeun batré kana cai atanapi cairan anu sanés.
- Store batteries in a cool, dry place, away from flammable materials.
- Only use original Einhell chargers for charging.
- Do not attempt to open, modify, or repair the battery pack.
- Jauhkeun batré tina jangkauan barudak.
- In case of battery leakage, avoid contact with skin and eyes. Rinse affected areas with water and seek medical attention.
- Dispose of depleted batteries responsibly according to local regulations.
3. Setup jeung Pamakéan Awal
3.1 Ngabongkar bungkusan
Carefully remove the batteries from their packaging. Inspect them for any signs of damage. If any damage is observed, do not use the batteries and contact customer support.
3.2 Ngeusi batre
Before first use, fully charge both batteries. Use only an Einhell Power X-Change charger (sold separately). The charging process is as follows:
- Sambungkeun carjer ka colokan listrik anu cocog.
- Geserkeun batréna kana carjer nepi ka ngaklik kana tempatna.
- Lampu indikator carjer bakal némbongkeun status ngecas. Tingali manual carjer anjeun pikeun pola lampu anu khusus.
- Once fully charged, the indicator light will change (e.g., solid green). Remove the battery from the charger.
The batteries feature a proactive battery management system and adapted charging cycles to optimize lifespan and performance.
4. Operating the Batteries
4.1 Nyelapkeun Batré kana Pakakas
Ensure the tool is switched off before inserting or removing the battery.
- Align the battery with the battery slot on your Einhell Power X-Change tool.
- Slide the battery firmly into the slot until it clicks securely into place.
- To remove, press the release button(s) on the battery (or tool, depending on design) and slide the battery out.
4.2 Indikator Muatan Batré
Each battery is equipped with an LED charge indicator. Press the button next to the LEDs to check the current charge level:
- 4 LED hurung: 75-100% muatan
- 3 LED hurung: 50-75% muatan
- 2 LED hurung: 25-50% muatan
- 1 lampu LED: Ngecas 0-25% (enggal ngecas deui)
5. Pangropéa sareng Panyimpenan
5.1 beberesih
Wipe the battery surface with a clean, dry cloth. Do not use abrasive cleaners or solvents. Ensure the battery terminals are clean and free of debris.
5.2 Panyimpenan
For optimal battery life, store batteries in a cool, dry place (ideally between 5°C and 20°C / 41°F and 68°F) and away from direct sunlight or extreme temperatures. If storing for extended periods, charge the batteries to approximately 50-75% capacity. Avoid storing fully discharged batteries.
6. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Batré teu ngecas. | Carjer teu tiasa dicolokkeun; carjer rusak; batréna panas teuing/tiis; batréna rusak. | Check power connection; try another charger; allow battery to reach room temperature; contact customer support if battery is faulty. |
| Alat henteu dianggo sareng batré. | Battery not fully inserted; battery discharged; faulty tool; faulty battery. | Ensure battery is clicked into place; charge battery; test with another battery/tool; contact customer support. |
| Battery charge indicator not working. | Button malfunction; internal fault. | Ensure button is pressed firmly; if issue persists, contact customer support. |
7. Spésifikasi
- Jumlah modél: 4511526
- Jenis Batré: Litium Ion (Li-Ion)
- Voltage: 18 V
- Kapasitas: 5.2 Ah (Ampsajam)
- Ukuran produk: 4.84 x 3.03 x 2.87 inci (12.3 x 7.7 x 7.3 cm)
- Beurat barang: 1.96 pounds (0.89 kg) per battery
- Jumlah Batré: 2 (included in twinpack)
- Dianjurkeun pamakéan: Power Tools within the Einhell Power X-Change system
8. Garansi jeung Rojongan
Einhell products are manufactured with high-quality materials and undergo strict quality control. For information regarding warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Einhell website. For technical support, spare parts, or service inquiries, please contact Einhell customer service through their official channels.
Official Einhell Websitus: www.einhell.com
