Hormann SupraMatic E Series 4 4510253 Garage Door Opener Replacement Actuator Manual

1. Produk Langkungview

The Hormann SupraMatic E Series 4 (model 4510253) is a replacement actuator designed for Hormann garage door operators. This unit serves as a direct replacement for defective operator heads, ensuring compatibility with existing Hormann drive rails and SupraMatic Series 4 systems. It integrates advanced features for reliable and efficient garage door operation.

Image showing the compact design of the Hormann SupraMatic E Series 4 replacement actuator, featuring its main housing and connection points.

2. Fitur konci

• Kasaluyuan: Designed to replace older SupraMatic E Series 3 drive heads and compatible with SupraMatic (excluding SupraMatic S) and ProMatic 1st Generation systems.
• Door Capacity: Suitable for garage doors up to 5500 mm wide and a maximum surface area of 13.75 m².
• Angkatan Operasi: Provides a pulling and pushing force of 650 N, with a peak power of 800 N.
• Laju: Achieves a maximum operating speed of 25 cm/s.
• Integrated Technology: Features an integrated 5-channel BiSecur receiver, Bluetooth receiver, and an LED module for illumination.

3. Eusi Paket

Saatos ngabongkar bungkusan, pariksa yén sadaya komponén aya:

• 1 x SupraMatic E Series 4 replacement motor with integrated 5-channel BiSecur receiver, Bluetooth receiver, and LED module.
• 1 x BlueSecur card with QR code.

4. Setup jeung Instalasi

This section outlines the general procedure for replacing an existing Hormann garage door operator head. For detailed, model-specific instructions, refer to the comprehensive manual provided with your original Hormann system or consult the manufacturer's websitus.

1. Kasalametan munggaran: Disconnect power to the garage door opener at the circuit breaker before beginning any work. Ensure the garage door is in a stable, secure position.
2. Dismount Old Operator Head: Carefully remove the existing, defective operator head from its mounting brackets and drive rail. Note the connections and wiring for reference.
3. Install New Operator Head: Mount the new SupraMatic E Series 4 replacement actuator onto the existing drive rail and secure it using the appropriate hardware. Reconnect all necessary wiring according to the original system's configuration.
4. Sambungan Daya: Sambungkeun deui kakuatan ka pembuka panto garasi.
5. Learning Procedure: Perform the initial learning procedure as described in the original system's manual to calibrate the new actuator to the garage door's travel limits.
6. Program Transmitters: Program any manual transmitters (remote controls) to the new actuator to restore full operation. Utilize the BlueSecur card and QR code for Bluetooth connectivity setup if desired.

Catetan: Professional installation is recommended if you are unfamiliar with electrical wiring or garage door mechanisms.

5. Parentah Operasi

Once installed and configured, the SupraMatic E Series 4 operates similarly to other Hormann garage door openers. Use your programmed remote control or the integrated Bluetooth functionality via the BlueSecur app to open and close the garage door.

Parameter operasi:

• Door Width (Max): 5500 mm
• Door Surface Area (Max): 13.75 m²
• Pulling/Pushing Force: 650 N
• Laju maksimum: 25 cm/s
• Suhu operasi: -20 °C nepi ka +60 °C
• Poéan / Hourly Cycles (Open/Close): 25/10
• Motor: 24 V DC
• Sasayogian tanaga: 230-240V AC
• Konsumsi Daya: 0.2 kW
• Konsumsi sayaga: <1 W
• Kelas panyalindungan: Suitable only for dry areas.
• Automatic Power Supply: Yes, only in combination with a photocell.

6. Pangropéa

Regular maintenance ensures the longevity and safe operation of your garage door opener. While the SupraMatic E Series 4 actuator itself requires minimal maintenance, it is crucial to maintain the entire garage door system.

• Inspeksi taunan: Have your garage door system, including springs, cables, rollers, and tracks, inspected by a qualified technician annually.
• Lubrication: Lubricate moving parts of the garage door (not the opener itself) as recommended by the garage door manufacturer.
• Sénsor beresih: Keep safety sensors (photocells) clean and free from obstructions to ensure proper operation.
• Pariksa Fasteners: Periodically check all mounting bolts and fasteners for tightness.

7. Cara ngungkulan

If you encounter issues with your SupraMatic E Series 4, consider the following general troubleshooting steps. For persistent problems, consult a qualified technician.

• Henteu aya kakuatan: Check the circuit breaker and ensure the opener is plugged into a working outlet.
• Jauh Teu Gawé: Verify battery in the remote. Ensure the remote is programmed correctly to the opener.
• Door Not Closing: Check safety sensors for obstructions or misalignment. The LED on the sensor should indicate proper alignment.
• Sora anu teu biasa: Inspect the garage door's mechanical components (springs, rollers, tracks) for wear or damage. Lubricate as necessary.
• Door Reverses: This often indicates an obstruction or a misadjusted closing force. Clear any obstructions and refer to the original manual for force adjustment.

8. Spésifikasi

9. Garansi jeung Rojongan

For warranty information and technical support, please refer to the official Hormann documentation included with your product or visit the official Hormann websitus. Simpen resi pameseran anjeun salaku bukti pameseran pikeun klaim garansi.

Kasadiaan suku cadang: Information regarding the availability of spare parts is currently unavailable. Please contact Hormann customer service for inquiries.