Buku Panduan Pangguna Einhell TC-WG 200 Wet Bench Grinder

Produk Leuwihview

The Einhell wet sander TC-WG 200 is designed for precise sharpening of tools without causing damage to the workpiece. Its wet grinding system continuously supplies water to the cutting edge, effectively preventing frictional heat buildup and annealing of the disc. This versatile device offers flexibility for grinding a wide range of tools. It features a corrosion-free water tank for cooling and includes an angle gauge for precise sanding angle adjustments. The sanding wheel can be prepared using the included grindstone, and the workpiece can be polished with stripping paste. For stability, the unit is equipped with four rubber feet that dampen vibrations and ensure secure placement. The package includes a slow-running, fine-grained wet sanding wheel and a leather sanding wheel for deburring.

Figure 1: The Einhell TC-WG 200 Wet Bench Grinder with its included accessories, including the grinding wheel, honing wheel, angle gauge, and grindstone.

Parentah Kasalametan penting

Salawasna baca sareng pahami sadaya peringatan sareng pitunjuk kaamanan sateuacan ngoperasikeun alat ieu. Gagal nuturkeun peringatan sareng pitunjuk tiasa nyababkeun sengatan listrik, kahuruan, sareng/atanapi tatu parah.

• Kasalametan Area Gawé: Jaga wewengkon gawé anjeun beresih jeung cahayana alus. Wewengkon nu pabalatak atawa poek ngondang kacilakaan. Ulah ngajalankeun parabot kakuatan dina atmosfir ngabeledug, kayaning ku ayana cair kaduruk, gas, atawa lebu.
• Kasalametan listrik: Colokan alat listrik kedah cocog sareng stop kontak. Pernah ngarobah colokan dina sagala cara. Ulah nyiksa ari. Ulah make ari keur mawa, narik, atawa cabut colokan alat kakuatan. Jauhkeun ari tina panas, minyak, ujung seukeut, atawa bagian pindah.
• Kasalametan Pribadi: Salawasna nganggo pelindung panon. Anggo pelindung dédéngéan nalika beroperasi kanggo waktos anu lami. Paké baju anu pantes. Ulah nganggo baju atanapi perhiasan anu leupas. Jauhkeun rambut, pakean, sareng sarung tangan anjeun tina bagian anu obah.
• Pamakéan sareng Perawatan Alat: Ulah maksakeun alat kakuatan. Anggo alat kakuatan anu leres pikeun aplikasi anjeun. Pegatkeun sambungan colokan ti sumber listrik samemeh nyieun sagala panyesuaian, ngaganti asesoris, atawa nyimpen parabot kakuatan.
• Wet Grinding Specifics: Ensure the water tank is filled to the appropriate level before operation. Always use the wet grinding feature to prevent overheating of the workpiece and grinding wheel.

Komponén jeung Bagian Kaasup

The Einhell TC-WG 200 Wet Bench Grinder comes with several key components and accessories to facilitate effective sharpening and polishing.

• Wet Grinding Disc: A slow-running, fine-grained wheel for primary sharpening.
• Roda Ngasah Kulit: Used for deburring and achieving a polished finish.
• Alat Ukur Sudut: A tool to accurately set and maintain the desired grinding angle.
• Grindstone: For preparing and dressing the wet grinding disc.
• Tangki cai: Integrated corrosion-free tank for cooling the workpiece during wet grinding.
• Tool Rest/Support: Adjustable support for holding tools against the grinding wheel.
• suku karét: Four feet designed to dampen vibrations and provide stable operation.

Figure 2: Key accessories included with the grinder, showing the angle gauge, grindstone, and tool rest.

Setup sareng Majelis

1. Ngabongkar bungkusan: Sacara saksama miceun sadaya komponén tina bungkusan. Mariksa karusakan naon waé.
2. panempatan: Place the grinder on a stable, level, and secure workbench or surface. Ensure the four rubber feet are firmly seated to dampen vibrations and provide stability.
   

   Figure 3: The robust rubber feet ensure stable and vibration-dampened operation.

3. Tangki cai: Fill the integrated corrosion-free water tank with clean water up to the indicated maximum level. This water is crucial for cooling the workpiece and preventing overheating during grinding.
   

   Figure 4: The water tank, essential for wet grinding, positioned beneath the grinding wheel.
4. Tool Rest Installation: Attach the tool rest to the designated mounting points on the grinder. Secure it firmly using the provided fasteners. This provides a stable platform for guiding your tools.
   

   Figure 5: Detail of the tool rest mounting mechanism.

5. Sambungan Daya: Connect the power cord to a suitable 125 Volt AC power outlet. Ensure the power switch is in the "OFF" position before plugging in.

Parentah Operasi

The Einhell TC-WG 200 is designed for efficient and precise sharpening. Follow these steps for optimal results.

1. Prepare the Grinding Wheel: Before initial use or if the grinding wheel becomes uneven, use the included grindstone to dress and prepare its surface. This ensures a consistent and effective grinding action.
2. Setel Sudut: Use the angle gauge to determine and set the correct grinding angle for your tool. Adjust the tool rest accordingly to maintain this angle during grinding.
   

   Figure 6: The angle gauge assists in precise angle setting for various tools.

3. Start the Grinder: Turn on the power switch. The 125 W motor will accelerate the wet sanding wheel to approximately 110 RPM. This slow speed is ideal for fine sanding and prevents overheating.
   

   Figure 7: Visual indicators for the grinder's slow speed and wet operation.

4. Ngagiling: Gently apply the tool to be sharpened against the wet grinding wheel, maintaining the set angle. Move the tool consistently across the wheel's surface. The continuous water supply will keep the tool cool.
   

   Figure 8: Proper technique for sharpening a tool on the wet bench grinder.
5. Honing and Polishing: After grinding, switch to the leather honing wheel to remove any burrs and achieve a finer, polished edge. For an even better finish, apply stripping paste to the leather wheel before honing.
6. rengse: Once the desired sharpness and finish are achieved, turn off the grinder and carefully remove the tool.

Pangropéa sareng Perawatan

Regular maintenance ensures the longevity and optimal performance of your Einhell TC-WG 200 Wet Bench Grinder.

• Tangki cai bersih: Regularly empty and clean the water tank to prevent algae buildup and ensure a continuous supply of clean cooling water.
• Ngalapis Roda: Periodically dress the wet grinding wheel with the grindstone to maintain its shape and expose fresh abrasive particles.
• Pariksa roda: Check both the wet grinding wheel and the leather honing wheel for wear or damage. Replace them if necessary.
• beberesih umum: After each use, wipe down the exterior of the grinder with a damp cloth to remove any grinding residue. Ensure no water enters electrical components.
• Panyimpenan: Store the grinder in a dry, clean place, away from direct sunlight and extreme temperatures.

Pamérésan masalah

This section addresses common issues you might encounter with your wet bench grinder.

Spésifikasi teknis

Figure 9: Visual representation of the grinding and honing wheel dimensions.

Garansi sareng Rojongan

For detailed warranty information, please refer to the documentation included with your product or visit the official Einhell websitus. Sarat jaminan biasana nutupan cacad manufaktur pikeun période anu ditangtukeun ti tanggal pameseran.

If you encounter any issues or require technical assistance, please contact Einhell customer support. Have your model number (TC-WG 200) and purchase details ready when contacting support.

Anjeun sering tiasa mendakan inpormasi kontak dukungan dina produsén website or in the product packaging. For general inquiries, you may visit the Einhell official websitus.