Manual Pamaké Alat Pemrograman Jauh Autek IKEY820 Pro OBD2

1. Bubuka

This manual provides comprehensive instructions for the operation and maintenance of the Autek IKEY820 Pro OBD2 Remote Programming Tool. The IKEY820 Pro is a professional device designed for automotive key programming, remote control matching, and diagnostic functions. Please read this manual thoroughly before using the device to ensure proper and safe operation.

2. Produk Langkungview

2.1 Eusi pakét

The Autek IKEY820 Pro package typically includes the following components:

• Autek IKEY820 Pro Main Unit
• Main Cable (OBD2 connector)
• Kabel USB
• Adaptor Daya (upami aya)
• Various Adapters (e.g., for specific vehicle models)
• Pelindung Mawa Case

Figure 2.1: Autek IKEY820 Pro main unit, main cable, USB cable, and various adapters, all contained within a protective carrying case.

2.2 Tata Tata Alat

Familiarize yourself with the physical components and controls of the IKEY820 Pro device:

Gambar 2.2: Detil view of the IKEY820 Pro device highlighting key buttons and ports. These include the Fn Key, Main Cable Port, ESC Key, USB Port, Power Port, OK Key, and directional navigation keys.

• konci Fn: Function key for special operations.
• Konci ESC: Escape key to return to the previous menu or cancel an operation.
• OK konci: Confirmation key to select options or proceed.
• Up/Down/Left/Right Keys: Navigation keys for menu selection.
• Main Cable Port: Connects the device to the vehicle's OBD2 port via the main cable.
• Port USB: Pikeun nyambungkeun ka komputer pikeun apdet atanapi transfer data.
• Palabuhan Daya: For external power supply if needed.

3. Fitur sarta Kamampuh

The Autek IKEY820 Pro offers a wide range of functions for automotive key programming and diagnostics:

Gambar 3.1: Leuwihview of the Autek IKEY820 Pro's key features, such as key programming, reading and clearing fault codes, and clearing key memory, as displayed on the device screen.

• Pemrograman konci:
  • Program Proximity & Non-proximity Keys
  • Program Smart Keys
  • Program Aftermarket & OEM Keys
  • Program Aftermarket & OEM Remote Key Fobs
  • Program Flip Keys
  • Add Keys Programming
  • All Keys Lost Programming
  • Pupus konci
• Immobilizer Functions:
  • Read Immobilizer Pin-Codes From ENGINE ECU or Body Control Module
  • Read Pre-Coded Data From Engine ECU or Body Control Module
  • Immo Reset (e.g., G and H chip Immo Reset for Toyota & Ford)
• Fungsi diagnostik:
  • Read & Clear Fault Codes
  • Hapus mémori konci
• Roadside Key Remote Programming: Provides support for roadside key programming for drivers.
• Cakupan Kandaraan éksténsif: Supports various vehicle models up to year 2017 (and later for specific functions/licenses).

Gambar 3.2: Kelamples of specific licenses for key programming, including Toyota & Ford (2018+ for Add Keys, All Keys Lost, G and H chip Immo Reset) and GM 2017+ / Grand Cherokee 2015-2017 / Dodge Durango 2015-2017.

4. Jangkauan Kendaraan

The IKEY820 Pro supports a broad range of vehicles across different regions. Specific coverage may vary based on software versions and purchased licenses.

Figure 4.1: Regional vehicle coverage for the IKEY820 Pro, including brands from Europe, Asia, and America.

4.1 European Vehicles

• Alfa-Romeo, Audi, Bentley, Citroen, Fiat, Jaguar, Land Rover, Maserati, MG, DS, Peugeot, Porsche, Renault, Ford, Opel, Volkswagen, Scion, Smart.

4.2 Asian Vehicles

• Acura, Honda, Hyundai, Kia, Infiniti, Isuzu, Lexus, Mazda, Mitsubishi, Mitsuoka, Nissan, Subaru, Suzuki, Toyota.

4.3 American Vehicles

• Buick, Cadillac, Chevrolet, Chrysler, Jeep, Ford, GMC, Hummer, Lincoln, Mercury, Pontiac, Dodge.

5. Setélan

Before using the Autek IKEY820 Pro, ensure the device is properly set up and updated.

5.1 Mimiti Power-Up

1. Connect the main cable to the Main Cable Port on the IKEY820 Pro.
2. Connect the other end of the main cable (OBD2 connector) to the vehicle's OBD2 diagnostic port.
3. The device should power on automatically. If not, ensure the vehicle's ignition is on (but engine off) or connect an external power supply to the Power Port.

5.2 Apdet parangkat lunak

Regular software updates are crucial for maintaining optimal performance and expanding vehicle coverage. Connect the IKEY820 Pro to a computer via the USB cable and follow the instructions provided by Autek's official update software.

6. Parentah Operasi

This section outlines general operating procedures. Specific steps for key programming will vary by vehicle make and model.

Figure 6.1: Main menu of the IKEY820 Pro, displaying options for Key Program, Settings, Activate, and About.

6.1 Napigasi Menu

• Ngagunakeun éta Tombol luhur / handap / kénca / katuhu to highlight desired options on the screen.
• Pencét éta OKÉ Key to select a highlighted option or confirm an action.
• Pencét éta ESC konci to go back to the previous screen or cancel an operation.
• The Tombol Fn may provide additional context-sensitive functions.

6.2 Key Programming Procedure (General Steps)

1. Tina ménu utama, pilih "KEY PROGRAM".
2. Choose the vehicle's make, model, and year from the displayed list.
3. Select the desired function (e.g., "Add Key", "All Keys Lost", "Erase Keys").
4. Follow the on-screen prompts carefully. These prompts will guide you through steps such as inserting keys, turning the ignition on/off, or entering security codes.
5. Confirm successful programming upon completion.

6.3 Menu Setélan

The "SETTINGS" menu allows you to configure device parameters. Options may include:

• Key Board Test: To verify button functionality.
• Reset PIN Test: For testing PIN code related functions.
• Caang: Saluyukeun kacaangan layar.
• Hardware Test: To diagnose internal hardware components.
• Update HW: For hardware-related updates.

7. Pangropéa

Proper maintenance ensures the longevity and reliability of your IKEY820 Pro.

• beberesih: Anggo lawon anu lemes sareng garing pikeun ngabersihkeun alat. Hindarkeun pembersih atanapi pangleyur anu abrasif.
• Panyimpenan: Simpen alat dina wadah pelindung na di tempat anu tiis sareng garing nalika henteu dianggo.
• Apdet parangkat lunak: Regularly check for and install software updates to ensure compatibility with new vehicle models and features.
• Perawatan kabel: Inspect cables for damage before each use. Do not bend or crimp cables excessively.

8. Cara ngungkulan

If you encounter issues with your IKEY820 Pro, refer to the following common troubleshooting steps:

If the problem persists after attempting these solutions, please contact Autek customer support for further assistance.

9. Spésifikasi

10. Garansi jeung Rojongan

For warranty information, technical support, or service inquiries, please refer to the official Autek websitus atanapi ngahubungan dealer otorisasi Anjeun. Simpen resi pameseran anjeun salaku bukti pameseran pikeun klaim garansi.

Pabrikan: AUTEKTOOLS

merek: Autek