Total TS2081006 800W Jig Saw User Manual

1. Bubuka

Thank you for choosing the Total TS2081006 800W Jig Saw. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new power tool. Please read this manual thoroughly before using the jig saw and keep it for future reference. Proper use and care will ensure optimal performance and extend the lifespan of your tool.

2. Pitunjuk Kasalametan Umum

Salawasna turutan pancegahan kaamanan dasar pikeun ngirangan résiko seuneu, kejutan listrik, sareng tatu pribadi.

• Kasalametan Area Gawé: Jaga wewengkon gawé anjeun beresih jeung cahayana alus. Wewengkon nu pabalatak atawa poek ngondang kacilakaan. Ulah ngajalankeun parabot kakuatan dina atmosfir ngabeledug, kayaning ku ayana cair kaduruk, gas, atawa lebu.
• Kasalametan listrik: Colokan alat listrik kedah cocog sareng stop kontak. Pernah ngarobah colokan dina sagala cara. Hindarkeun kontak awak sareng permukaan bumi atanapi grounded. Ulah ngalaan alat listrik ka hujan atawa kaayaan baseuh.
• Kasalametan Pribadi: Always wear eye protection. Use hearing protection when operating noisy tools. Dress properly; avoid loose clothing or jewelry. Secure long hair. Stay alert and use common sense.
• Pamakéan sareng Perawatan Alat: Ulah maksakeun alat kakuatan. Anggo alat kakuatan anu leres pikeun aplikasi anjeun. Pegatkeun sambungan colokan ti sumber listrik samemeh nyieun sagala panyesuaian, ngaganti asesoris, atawa nyimpen parabot kakuatan.
• Jig Saw Specific Safety:
  • Hold the tool by insulated gripping surfaces when performing an operation where the cutting accessory may contact hidden wiring or its own cord.
  • Ngamankeun workpiece nu. Paké clamps atawa catok pikeun nyekel benda kerja.
  • Ensure the blade is correctly installed and secured before operation.
  • Keep hands clear of the cutting area.

3. Produk Langkungview jeung Komponén

Familiarize yourself with the parts of your Total TS2081006 Jig Saw before operation.

Gambar 3.1: Total TS2081006 800W Jig Saw with a pack of blades. The tool features a teal and white body, an ergonomic handle, and a visible blade guard.

Gambar 3.2: Samping view of the Total TS2081006 800W Jig Saw, highlighting the motor housing and handle design. The power cord extends from the rear of the handle.

Komponén konci:

• cecekelan: Dirancang sacara ergonomis pikeun cekelan sareng kontrol anu nyaman.
• Saklar pemicu: Aktipkeun motor.
• Tombol konci: Pikeun operasi kontinyu.
• Agul Clamp: Secures the jig saw blade.
• Pelat Dasar (Sapatu): Ngarojong pakakas dina benda kerja sareng tiasa disaluyukeun pikeun potongan bevel.
• Port lebu: For connecting a dust extraction system (if applicable).
• Pamilih Aksi Orbital: Adjusts the blade's orbital movement for different cutting speeds and materials (if applicable).

4. Setélan

4.1 Pamasangan sabeulah

1. Pastikeun Daya Pegatkeun: Always unplug the jig saw from the power source before installing or changing blades.
2. Buka Blade Clamp: Manggihan sabeulah clamp mechanism (usually a lever or screw) and open it.
3. Selapkeun Blade: Insert the shank of the appropriate jig saw blade into the blade clamp opening, ensuring the teeth face forward. Push the blade in until it seats firmly.
4. Sabeulah Aman: Tutup sabeulah clamp mechanism securely. Gently pull on the blade to ensure it is locked in place.

4.2 Base Plate Adjustment (Bevel Cuts)

1. Pastikeun Daya Pegatkeun: Cabut alatna.
2. Loosen Base Plate Screws: Locate the screws or lever that secure the base plate. Loosen them sufficiently to allow the base plate to pivot.
3. Saluyukeun Sudut: Tilt the base plate to the desired bevel angle (e.g., 15°, 30°, 45°). Most jig saws have detents for common angles.
4. Kencangkeun screws: Securely tighten the base plate screws or lever to lock the angle in position.

5. Parentah Operasi

5.1 Sateuacan Ngamimitian

• Pastikeun workpiece geus aman clamped.
• Select the appropriate blade for the material and cut type.
• Adjust the base plate for straight or bevel cuts as needed.
• Colokkeun alat kana stop kontak listrik anu cocog.

5.2 Nyieun cut a

1. Posisi Alat: Tempatkeun ujung hareup pelat dasar rata dina benda kerja, pastikeun bilahna bébas tina bahanna.
2. Mimitian Potong: Depress the trigger switch to start the motor. Allow the blade to reach full speed before engaging the material.
3. Guide the Tool: Slowly guide the jig saw along your marked cutting line. Apply steady, even pressure. Do not force the tool; let the blade do the work.
4. Rengse motong: Once the cut is complete, release the trigger switch and wait for the blade to stop completely before lifting the tool from the workpiece.

5.3 Plunge Cuts (Internal Cuts)

For internal cuts without a pilot hole, a plunge cut can be performed. This technique requires caution.

1. Tilt Tool: Tilt the jig saw forward so the front edge of the base plate rests on the workpiece, with the blade clear of the surface.
2. Mimitian Motor: Hurungkeun motor sareng antepkeun bilahna ngahontal kecepatan pinuh.
3. Slowly Lower: Slowly lower the rear of the base plate until the blade begins to cut into the material.
4. Level Tool: Once the blade has fully penetrated the material, level the tool and proceed with the cut as usual.

6. Pangropéa

Regular maintenance ensures the longevity and safe operation of your jig saw. Always disconnect the tool from the power source before performing any maintenance.

• beberesih: Regularly clean the ventilation openings to prevent motor overheating. Use a soft brush or compressed air to remove dust and debris from the tool. Do not use water or chemical cleaners.
• Gantian sabeulah: Ganti bilah anu kusam atanapi rusak gancang-gancang. Tingali bagian 4.1 kanggo pamasangan bilah.
• Inspeksi kabel: Periodically inspect the power cord for damage. If damaged, have it repaired by a qualified service technician.
• Panyimpenan: Store the jig saw in a dry, secure location out of reach of children.

7. Cara ngungkulan

Bagian ieu ngabahas masalah umum anu anjeun tingali. Pikeun masalah teu didaptarkeun di dieu, kontak rojongan customer.

8. Spésifikasi

Technical data for the Total TS2081006 800W Jig Saw.

• model: TS2081006
• kakuatan: 800 Watt
• Voltage: AC (Standard mains voltage, typically 220-240V in Egypt)
• Beurat barang: 1 Kilogram
• Ukuran produk: 10 x 20 x 37 cm
• warna: Teal / Grey
• Bahan gagang: Thermoplastic Elastomers or Rubber
• Fitur husus: Desain ergonomis
• Bahan sabeulah: High Speed ​​Steel (pikeun wilah kaasup)
• Saran permukaan: Aluminum (suitable for various materials with correct blade)

9. Garansi jeung Rojongan

Total products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your purchase or contact your retailer.

For technical support, service, or to order replacement parts, please contact the authorized Total service center or your point of purchase. Ensure you have your model number (TS2081006) and purchase details available.