1. Bubuka
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your Yaheetech Twin Size Metal Bed Platform. Please read this manual thoroughly before assembly and use to ensure safe and correct operation. Keep this manual for future reference.
2. Émbaran Kasalametan
PERHATOSAN:
- Do not load more than 300 pounds on this bed frame. Exceeding this weight limit may cause structural failure and injury.
- Exercise caution around sharp edges during assembly and use to prevent cuts or injuries.
- Always follow the provided assembly instructions precisely to ensure the bed frame is stable and to prevent collapse.
- Pastikeun sadaya baut sareng pengencangna parantos diketatkeun pageuh sateuacan dianggo sareng parios sacara berkala naha heuras atanapi henteu.
3. Daptar Bagian
Before beginning assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact Yaheetech customer service.
- Headboard
- Papan tilas
- Rel samping
- Ngarojong Suku
- Bilah Logam
- Hardware (bolts, nuts, washers, Allen wrench)
4. Parentah Majelis
Perakitan biasana meryogikeun dua déwasa. Mangga turutan léngkah-léngkah ieu kalawan saksama.
Step 1: Attach Headboard and Footboard to Side Rails
Connect the side rails to the headboard and footboard using the provided bolts and the Allen wrench. Ensure all connections are firm but do not overtighten initially.
Gambar: Deukeut view of a bolt being inserted into a connection point on the bed frame, securing two metal components together. This illustrates a typical connection method during assembly.
Image: A hand using an Allen wrench to tighten a bolt on a metal bed frame connection. This shows the final tightening step for securing frame components.
Step 2: Install Support Legs
Attach any central support legs to the frame as indicated in the diagram. These legs provide additional stability to the mattress foundation.
Léngkah 3: Pasangkeun Bilah Logam
Position the metal slats across the side rails. Ensure each slat is properly seated in its designated slot or attached securely. Some slats may require pressing into place.
Image: A two-part image demonstrating the installation of metal slats. The first part shows aiming an iron pipe (slat) at a notch on the bed frame. The second part shows pressing the pipe firmly into place to fix it.
Lengkah 4: Tightening Final
Once all components are in place, go back and securely tighten all bolts. Do not overtighten to avoid stripping threads, but ensure all connections are snug.
Image: A fully assembled Yaheetech Twin Size Metal Bed Platform with a mattress and bedding, showcasing the headboard and footboard design. A storage basket is visible underneath the bed.
5. Parentah Operasi
Your Yaheetech Twin Size Metal Bed Platform is designed for use with a standard twin-size mattress (75" L × 39" W). No box spring is required as the metal slats provide adequate support.
- Penempatan kasur: Carefully place your twin-size mattress directly onto the metal slats.
- Kapasitas beurat: The bed frame has a maximum weight capacity of 300 pounds. Do not exceed this limit.
- Panyimpenan handapeun ranjang: The 11.2-inch clearance provides ample space for storage boxes, baskets, or other items, helping to keep your room organized.
Image: A collage highlighting key features: "Sleek Industrial Style" showing the headboard, "Premium metal tubes ensure extended years of use" showing slat detail, "Ample under-bed room maximizes your storage space" with a 13-inch measurement, and "Bottom rubber caps keep your floor away from damage" showing a close-up of a leg cap.
6. Pangropéa
Pangropéa anu rutin bakal ngabantosan manjangkeun umur sareng penampilan rangka ranjang anjeun.
- beberesih: The powder-coated iron frame is designed for easy cleaning. Wipe clean with a damp cloth and immediately wipe dry with a clean, soft cloth to prevent water spots or rust. Avoid abrasive cleaners.
- Pariksa Fastener: Periodically check all bolts and connections to ensure they remain tight. Retighten as necessary to maintain stability and prevent squeaking.
- Under-bed Cleaning: The 11.2-inch ground clearance allows for easy cleaning underneath the bed, including access for vacuuming robots.
7. Cara ngungkulan
Upami anjeun ngalaman masalah sareng rangka ranjang anjeun, tingali masalah sareng solusi umum ieu:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Rangka ranjang goyah atanapi teu stabil. | Baut kendor atanapi rakitanna teu leres. | Pastikeun yén sakabéh baud aman tightened. Review parentah perakitan pikeun mastikeun sadaya bagian parantos dipasang kalayan leres. |
| Gerung-gerung. | Loose connections, friction between metal parts, or uneven floor. | Tighten all bolts. Apply a small amount of lubricant (e.g., silicone spray) to connection points if squeaking persists. Ensure the bed is on a level surface. |
| Leungit bagian atawa komponén ruksak kana datangna. | Kasalahan manufaktur atanapi pengiriman. | Do not proceed with assembly. Contact Yaheetech customer service immediately for replacement parts. |
8. Spésifikasi
| Fitur | Rincian |
|---|---|
| Ukuran | kembar |
| Ukuran produk (L x W x H) | 78 "L x 41" W x 35" H |
| Ukuran Kasur Cocog | 75" L × 39" W |
| Kamampuh beurat maksimum | 300 pon |
| Jarak Kolong Ranjang | 11.2 inches (approx. 13 inches ground to item distance) |
| Warna | Bodas |
| Bahan | Beusi |
| Tipe rengse | Dilapis bubuk |
| Fitur husus | No Box Spring Needed, Squeak Resistant (when properly assembled) |
| Majelis Diperlukeun | Sumuhun |
Image: A detailed diagram showing the dimensions of the Yaheetech Twin Size Metal Bed Platform, including length, width, height, headboard height, footboard height, and under-bed clearance.
9. Garansi jeung Rojongan
For warranty information, replacement parts, or further assistance, please contact Yaheetech customer service directly. Refer to your purchase documentation or the Yaheetech official websitus pikeun detil kontak.
Pabrikan: Yaheetech
ASIN: B094Q6M3FC
