Bubuka
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Hitachi WT-P200Y Automatic Shallow Well Pump. Please read this manual thoroughly before using the product and keep it for future reference.
The Hitachi WT-P200Y is an inverter-controlled automatic shallow well pump designed for reliable water supply. It features an easy-to-use control panel for convenient operation.
Émbaran Kasalametan
Salawasna perhatikeun pancegahan kaamanan di handap ieu pikeun nyegah tatu atanapi karusakan produk.
- Ensure the power supply matches the pump's requirements (Single Phase 100V, 50/60Hz).
- Do not operate the pump without water, as this can cause damage.
- All electrical connections must be performed by a qualified electrician in accordance with local codes.
- Jauhkeun barudak sareng tanaga anu teu sah tina pompa nalika operasi.
- Pegatkeun sambungan kakuatan sateuacan ngalakukeun pangropéa atanapi perbaikan.
- Ngajaga pompa tina hawa katirisan.
Setup sareng Instalasi
Pamasangan anu leres penting pisan pikeun kinerja anu optimal sareng umur panjang pompa anjeun.
- Ngabongkar bungkusan: Sacara saksama cabut pompa tina bungkusanna. Pariksa karusakan pengiriman barang.
- panempatan: Install the pump on a stable, level surface in a well-ventilated area, protected from direct sunlight, rain, and freezing. Ensure adequate space for maintenance.
- Sambungan Pipa:
- Connect the suction pipe (25mm, Rc1) to the pump's suction inlet. Ensure an airtight seal to prevent air leaks.
- Connect the discharge pipe (25mm, Rc1) to the pump's discharge outlet.
- Use appropriate fittings and sealants to prevent leaks.
- Priming: Before initial operation, the pump must be primed.
- Remove the priming plug (if applicable) or fill the pump casing with water until full.
- Replace the plug securely.
- Sambungan listrik: Connect the power cord to a grounded 100V, 50/60Hz power outlet. Ensure the circuit is protected by a suitable circuit breaker.
Gambar 1: Diagram showing the Hitachi WT-P200Y pump's dimensions and performance curve. The diagram illustrates the pump's physical measurements, including discharge and suction outlets, and a graph detailing the relationship between total head (m) and discharge volume (L/min) under various operating pressures and suction heights. This helps in planning installation and understanding operational limits.
Parentah Operasi
The WT-P200Y features an easy-to-use control panel for selecting operating modes.
- Mimitian ngamimitian:
- After ensuring proper installation and priming, plug in the pump.
- The pump will automatically start when water is demanded (e.g., opening a faucet) and stop when demand ceases.
- Selecting Operating Pressure Modes: The control panel allows selection of different pressure modes. Refer to the panel diagram for specific settings.
- Modeu standar: Provides balanced pressure for general household use.
- High Pressure Mode: For applications requiring stronger water pressure.
- Low Pressure Mode: For situations where reduced pressure is desired.
- Operasi otomatis: The pump is designed for automatic operation. It will detect water demand and adjust its output accordingly, thanks to its inverter technology.
Gambar 2: Image displaying the easy-to-use control panel of the Hitachi WT-P200Y pump. The panel allows users to select from various operating pressure modes (Standard, High, Low) to suit different water usage requirements. This image also highlights the wear-resistant elastic casing technology.
Pangropéa
Pangropéa rutin mastikeun umur panjang sareng operasi pompa anjeun anu efisien.
- Cék Bulanan:
- Inspect for any visible leaks around connections.
- Check for unusual noises or vibrations during operation.
- Inspeksi taunan:
- Clean any debris from the pump's exterior.
- Verify the condition of the power cord and plug.
- For internal component checks, it is recommended to contact a qualified service technician.
- Persiapan usum tiris (pikeun iklim tiis):
- Drain all water from the pump and piping to prevent freezing damage.
- Simpen pompa di tempat anu haneut, garing upami mungkin, atanapi insulasi sacara saksama.
Gambar 3: Hiji internal view of the Hitachi WT-P200Y pump, highlighting the innovative Y-shaped impeller design and the wear-resistant elastic casing. This design contributes to the pump's high lift capability and durability, reducing wear from sand and debris in the water.
Pamérésan masalah
Tingali kana bagian ieu pikeun masalah umum sareng solusina.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Pompa teu ngamimitian. | No power supply; tripped circuit breaker; motor overload. | Check power connection; reset circuit breaker; allow motor to cool down. |
| Pompa jalan tapi cai teu aya nu asup. | Pump not primed; air leak in suction line; low water level in well; clogged suction filter. | Re-prime the pump; check all suction connections for leaks; verify well water level; clean suction filter. |
| tekanan cai low. | Partial clog in piping; incorrect pressure mode selected; worn impeller. | Check and clear piping; select higher pressure mode on control panel; contact service for impeller inspection. |
| Siklus pompa sering. | Small leak in plumbing system; pressure switch malfunction. | Inspect plumbing for leaks; contact service for pressure switch check. |
spésifikasi
| Fitur | Rincian |
|---|---|
| Modél | WT-P200Y |
| merek | Hitachi |
| Sumber Daya | Jenis kabel kakuatan |
| Voltage | 100 Volts (Single Phase) |
| Frékuénsi | 50/60Hz |
| Kaluaran dipeunteun | 200W |
| Wattage (Konsumsi Daya) | 440 W |
| Ukuran produk (L x W x H) | 35.6 x 37.6 x 49 cm |
| Beurat produk | 14 kg |
| Laju Aliran Max | 35 liter/menit |
| Max Angkat Jangkungna | 12 méter |
| Warna | kulawu |
| Kaasup Asesoris | Instruksi Manual |
Gambar 4: Jendral view of the Hitachi WT-P200Y Automatic Shallow Well Pump. This image provides an overall visual reference of the product's design and appearance.
Garansi sareng Rojongan
Produk ieu hadir kalawan a 1-taun jaminan produsén urang ti tanggal beuli. Punten tahan bukti pameseran anjeun pikeun klaim garansi.
For technical support, service, or warranty inquiries, please contact Hitachi Global Life Solutions customer service. Contact information can typically be found on the official Hitachi websitus atanapi dina dokuméntasi pameseran Anjeun.
Note: Unauthorized repairs or modifications will void the warranty.
