1. Produk Langkungview
The Elitech ECB-5080S is an advanced electrical control box designed for precise temperature management in various applications. It integrates an MTC-6000N controller to manage cooling, defrosting, and fan operations. This unit is suitable for systems requiring 3-phase 380V power and up to 15Hp capacity, offering comprehensive protection features for reliable operation.
Gambar 1: Hareupeun view of the Elitech ECB-5080S Electrical Control Box, showing the control panel with two digital displays, indicator lights for Power, Comp, Defr, Fan, and Fault, and an ON/OFF switch.
2. Fitur konci
- Pangimeutan jauh: Parameters can be viewed or set remotely via website and mobile application. Data and graph reports are available in real-time.
- Dual tampilan: Shows temperature on both integrated temperature controllers. Multiple indicator lights display the operational status of each connected device.
- Multi-Alarms: Provides alerts for temperature over-limit, over-range conditions, or sensor malfunctions.
- Perlindungan komprehensif: Includes high-pressure, low-pressure, module, overload, phase sequence, phase loss, three-phase unbalance, and inverse time protection.
- Fungsionalitas: Offers refrigeration, defrosting, and fan three-way output. Equipped with two storage temperature sensors and one defrosting temperature sensor.
3. Setup jeung Instalasi
Proper installation is crucial for the safe and efficient operation of the ECB-5080S control box. It is recommended that installation be performed by a qualified electrician.
- Pamasangan: Securely mount the control box in a suitable location, ensuring adequate ventilation and protection from environmental elements.
- Sambungan Daya: Connect the 3-phase 380V power supply to the designated terminals. Verify correct phase sequence and voltage.
- Sambungan beban: Connect the refrigeration unit, defrosting heaters, and fan motors to their respective output terminals as per the wiring diagram (refer to the detailed wiring diagram provided with the product packaging).
- Pamasangan sénsor: Install the two storage temperature sensors and one defrosting temperature sensor in their appropriate locations within the controlled environment. Ensure sensors are correctly positioned for accurate readings.
- Grounding: Ensure the control box is properly grounded to prevent electrical hazards.
Gambar 2: Angled view of the Elitech ECB-5080S Electrical Control Box, highlighting the side ventilation and overall robust construction.
4. Parentah Operasi
The ECB-5080S utilizes an MTC-6000N controller for its primary functions. Familiarize yourself with the controller's interface for optimal use.
- Hurungkeun/Pareuman: Use the main ON/OFF switch on the front panel to power the unit.
- Suhu Témbong: The dual digital displays show current temperatures. Refer to the MTC-6000N controller manual for specific display interpretations.
- Setélan Parameter: Access the controller's menu to set desired temperature ranges, defrost cycles, fan operation modes, and alarm thresholds. Consult the MTC-6000N controller's dedicated manual for detailed parameter setting procedures.
- Lampu Indikator:
- kakuatan: Nunjukkeun unit narima kakuatan.
- COMP: Indicates the compressor (cooling) is active.
- DEFR: Indicates the defrost cycle is active.
- kipas: Indicates the fan is operating.
- SALAH: Illuminates when an error or alarm condition is detected. Refer to troubleshooting for details.
- Aksés Jauh: Utilize the Elitech website or mobile application for remote monitoring and parameter adjustments. Ensure the unit is connected to a network as per its network configuration guide.
Gambar 3: Deukeut view of the Elitech ECB-5080S control panel, emphasizing the ON/OFF switch and the two integrated temperature controllers.
5. Pangropéa
Regular maintenance ensures the longevity and optimal performance of your ECB-5080S control box.
- beberesih: Periodically clean the exterior of the control box with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Ventilasi: Ensure that ventilation openings are clear of dust and obstructions to prevent overheating.
- Sambungan: Annually inspect all electrical connections for tightness and signs of corrosion. Tighten any loose connections.
- Cék sénsor: Verify that temperature sensors are clean and securely mounted. Check sensor cables for damage.
- Apdet parangkat lunak: Check the Elitech website or app for any available firmware updates for the MTC-6000N controller to ensure optimal functionality and security.
6. Cara ngungkulan
This section provides solutions to common issues. For complex problems, contact Elitech technical support.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Unit teu hurung. | No power supply; main switch off; faulty wiring. | Check power source; ensure main switch is ON; inspect wiring connections. |
| tampilan suhu teu akurat. | Faulty sensor; sensor incorrectly placed; wiring issue. | Check sensor connections; verify sensor placement; replace faulty sensor if necessary. |
| FAULT indicator is lit. | Over-limit temperature; sensor error; protection activated (e.g., phase loss). | Check alarm messages on controller; inspect sensors; verify power supply and phase integrity. |
| Cooling/Defrost/Fan not operating. | Incorrect parameter settings; faulty output relay; motor/component failure. | Verify controller settings; check indicator lights; inspect connected components. |
7. Spésifikasi
| merek | Elitech |
| Nomer modél | ECB-5080S |
| Voltage | 380 Volts (3 Phase) |
| Daya kuda maksimum | 15 Hp |
| Tipe Controller | MTC-6000N |
| Fungsi | Refrigeration, Defrosting, Fan Control |
| Fitur panyalindungan | High/Low Pressure, Module, Overload, Phase Sequence/Loss, Three-phase Unbalance, Inverse Time |
| ASIN | B097MXGKFP |
| UPC | 781454242337 |
